P0191 - Fuel Rail Pressure Sensor

[Juano11]

Originally Posted by trustbran

Just got this, gonna handle it. Thanks for the write up guys!

Replaced mine myself about a year ago following the directions above. Worked great. No problems since replacement.

It's easy. I'm not particularly "handy", but can follow directions.

There's no need to pay for this repair. You can do it.

[GODSPD]

13537622231 is a Bosch part for $49.49 at ECS & Turner
13537614317 is a Turner part for $88.19 at Turner

ECS says 13537614317 does not fit. Obviously several of you have used said part# and had no issues.

RealOEM shows the part# as 13537622231 which is the less expensive part.

Any reason I shouldn't purchase the lesser expensive of the two parts?

Benefit of the Turner part over the Bosch OEM?

Appreciate your thoughts.

PS - Was just quoted $550 to replace this part at the dealership and then found this thread convincing me I can replace this myself.

[AlexTek]

Originally Posted by GODSPD

13537622231 is a Bosch part for $49.49 at ECS & Turner
13537614317 is a Turner part for $88.19 at Turner

ECS says 13537614317 does not fit. Obviously several of you have used said part# and had no issues.

RealOEM shows the part# as 13537622231 which is the less expensive part.

Any reason I shouldn't purchase the lesser expensive of the two parts?

Benefit of the Turner part over the Bosch OEM?

Appreciate your thoughts.

PS - Was just quoted $550 to replace this part at the dealership and then found this thread convincing me I can replace this myself.

Is an easy fix. Should be charged by the stealership like 1/2 hour labor. LOL

By the one BMW recommend, the cheaper one.

[GODSPD]

Much Appreciated, AlexTek.

[Iyzmi]

Originally Posted by GODSPD

13537622231 is a Bosch part for $49.49 at ECS & Turner
13537614317 is a Turner part for $88.19 at Turner

ECS says 13537614317 does not fit. Obviously several of you have used said part# and had no issues.

RealOEM shows the part# as 13537622231 which is the less expensive part.

Any reason I shouldn't purchase the lesser expensive of the two parts?

Benefit of the Turner part over the Bosch OEM?

Appreciate your thoughts.

PS - Was just quoted $550 to replace this part at the dealership and then found this thread convincing me I can replace this myself.

I replaced mine a couple years ago with 13537614317 because that's what my original one looked like (not silver like the new p/n) and it was cheaper. The Bosch part wasn't available at the time though, I'd probably just use that if I had to replace it again.

[GODSPD]

Awesome, thank you, lyzmi!

Ordering the Bosch part as we speak.

[A97Snipe]

Thanks to everyone's great help in this post. Just replaced the sensor and it was a relative breeze. Awesome resource!

[old4]

Originally Posted by A97Snipe

Thanks to everyone's great help in this post. Just replaced the sensor and it was a relative breeze. Awesome resource!

Hey man did you replace it with the 231 part or 317 part? I need to do that too lol.

[SkiFly01]

Originally Posted by GODSPD

Any reason I shouldn't purchase the lesser expensive of the two parts?

The bosch part is the same as the bmw part, just doesn't have the bmw logo. I've been running that part without issue just like the other people on her as well.

[TexasEmThree]

Super easy replacement as long as the airbox is out. It fixed the P0191 and P2290 codes.

[cb1]

Hey guys,

Need suggestions. Mine failed and got P0192 and misfires at cyls 1-7. Replaced the sensor with the newer version (silver).

The car is cranking but will not start.

Battery is fully charged.
Gas is a little over a quarter.
Fuel pump primes.
Fuel pump fuse is good.

Any other thing I can check?

Thanks.