M3 World Exhaust

Dlpfcb · 04-03-2018, 09:31 PM

I just visited there website and the valved version sounds awesome. Only came across one other thread on the exhaust but if anyone else is running it I would really like your opinion on how you like it from a quality and sound stand point. So far I spoke with Dave there and the Customer Service has already been top notch.

https://m3world.com.au/product/exhau...n-with-valves/

cplagz · 04-05-2018, 07:21 PM

Have a look in the Australia forum mate, plenty of us have the M3 World exhaust in various setups.

I have the valved rear box with M3World HFC x-pipe. Closed, it has a nice note - deeper then stock, a little less rasp.

Open the valves and I find it does drone a little from 2000-2250rpm so I don't usually just cruise around with it set open, only when I want to use the loud pedal a little more spiritedly then the aural experience is amazing.

Build quality and fitment was great, I installed both lying on my garage floor in a few hours... including having to cut the tips shorter (I bought second hand E92 rear box and own an E90 M3)

Dlpfcb · 04-05-2018, 10:20 PM

Quote:

Originally Posted by cplagz

Have a look in the Australia forum mate, plenty of us have the M3 World exhaust in various setups.

I have the valved rear box with M3World HFC x-pipe. Closed, it has a nice note - deeper then stock, a little less rasp.

Open the valves and I find it does drone a little from 2000-2250rpm so I don't usually just cruise around with it set open, only when I want to use the loud pedal a little more spiritedly then the aural experience is amazing.

Build quality and fitment was great, I installed both lying on my garage floor in a few hours... including having to cut the tips shorter (I bought second hand E92 rear box and own an E90 M3)

Thanks, have you enjoyed the exhaust overall and would you reccomend it.

antonyl · 04-06-2018, 01:58 AM

I have the xpipe with resonators and high flow cats , running stock rear section.
It sounds fantastic, quiet at low throttle input and screams when you give it some.
Build quality is excellent, easily fittment and quality welds.

cplagz · 04-11-2018, 07:36 PM

Yes i would definitely recommend it, the workmanship is very good. I listened to a lot of different exhausts before choosing this one (Akra/Borla/Remus/Supersprint/MPE). It gives the car more of a deep V8 round then a raspier burble (like MPE does) or tinny drone at lower rpm (like Akra Ti)

Dlpfcb · 04-12-2018, 08:57 AM

Quote:

Originally Posted by cplagz

Yes i would definitely recommend it, the workmanship is very good. I listened to a lot of different exhausts before choosing this one (Akra/Borla/Remus/Supersprint/MPE). It gives the car more of a deep V8 round then a raspier burble (like MPE does) or tinny drone at lower rpm (like Akra Ti)

Thank you! Looking at probably pulling the trigger on it. Cant beat the price as well!

BRNDNSLVRA · 04-12-2018, 04:24 PM

The rear section sounds amazing!

Dlpfcb · 04-12-2018, 07:28 PM

Quote:

Originally Posted by 954MM

The rear section sounds amazing!

I dont know if I can do the extreme but this video sold me on it. Sounds amazing. Thanks a lot for sharing.

'ringmeister · 04-12-2018, 07:57 PM

Who sells their stuff in the US?

Dlpfcb · 04-12-2018, 08:27 PM

Quote:

Originally Posted by 'ringmeister

Who sells their stuff in the US?

I can send you the info. It ships direct from Australia I think is where it is at. They will send you a single quote with USD conversion....which is great by the way plus shipping and insurance. Its a great price with top notch service. I'm thinking I'm going to finally pull the triggeron the valved version.

BRNDNSLVRA · 04-13-2018, 08:34 AM

Quote:

Originally Posted by Dlpfcb

I dont know if I can do the extreme but this video sold me on it. Sounds amazing. Thanks a lot for sharing.

One of the best sounding exhausts Ive heard. Now I have to decide between this and Corsa UUC with ACM test pipes

Dlpfcb · 04-13-2018, 05:51 PM

Quote:

Originally Posted by 954MM

One of the best sounding exhausts Ive heard. Now I have to decide between this and Corsa UUC with ACM test pipes

I dont know if you checked out this exhaust with test pipes but it sounds great plus you get the option of having the remote controlled valves.

cplagz · 04-16-2018, 05:46 PM

I will take a video of mine today and reply for you with valves opened/closed. Just have to wait for the neighbours to wake up....

Dlpfcb · 04-16-2018, 06:18 PM

Quote:

Originally Posted by cplagz

I will take a video of mine today and reply for you with valves opened/closed. Just have to wait for the neighbours to wake up....

That’s awesome, would really appreciate that.

Route 16 · 04-16-2018, 06:53 PM

I’m interested in their dual wall joining clamps
https://m3world.com.au/product/dual-...oining-clamps/
Since I already have an iPE valved muffler and now looking into test pipes. Those clamps are really convenient if I have enough room to reuse my primary stock cats without welding anymore

Dlpfcb · 04-16-2018, 07:52 PM

Quote:

Originally Posted by Route 16

I’m interested in their dual wall joining clamps
https://m3world.com.au/product/dual-...oining-clamps/
Since I already have an iPE valved muffler and now looking into test pipes. Those clamps are really convenient if I have enough room to reuse my primary stock cats without welding anymore

Oh I got you, you are thinking you could move the cats on and off to do emissions?

BoringBlue · 03-04-2019, 08:22 PM

Just want to add to this thread a long overdue post... After a lot of looking and listening, I ended up buying the full exhaust from M3 World. Was a little concerned coming from Australia to Colorado, but they were amazing to deal with and I had zero problems receiving it. They had the tried and true vacuum valves, but were testing new electronic valves. I really liked that idea for the ease of install. Anyway, I have their very first set and love them. I have a wireless remote in the car and can open and shut the valves on a click. Highly recommend M3 World. The shipping and packaging was amazing and install was easy. And yes, love the sound. Quite enough for daily driving in the city and loud enough with the valves open to make you feel like your driving an M3...

DaveDee · 04-24-2019, 05:18 PM

Thanks to everyone for the kind words and also local support and input. I missed this post and would have replied much earlier. I frequently ship systems internationally and it's no trouble to do so, in fact US buyers end up with a better deal due to the currency exchange and removal of local taxes, in effect getting 40% than local list price. These systems were originally setup for M3post members and m3world formed to offer some sanity in pricing M3post members get a 10% off current prices as costs have risen over the years and now the systems are priced as regular retail products. Any questions feel free to ask and again thanks for the awesome support over the years.

msan · 04-24-2019, 06:11 PM

Looks like the installer put the wrong muffler on each side

Quote:

Originally Posted by BoringBlue

Just want to add to this thread a long overdue post... After a lot of looking and listening, I ended up buying the full exhaust from M3 World. Was a little concerned coming from Australia to Colorado, but they were amazing to deal with and I had zero problems receiving it. They had the tried and true vacuum valves, but were testing new electronic valves. I really liked that idea for the ease of install. Anyway, I have their very first set and love them. I have a wireless remote in the car and can open and shut the valves on a click. Highly recommend M3 World. The shipping and packaging was amazing and install was easy. And yes, love the sound. Quite enough for daily driving in the city and loud enough with the valves open to make you feel like your driving an M3...

8500RPM · 04-24-2019, 06:30 PM

Looks very nice for the price. Megan is temping for its price but it just bothers me to the core to get cheap stuff that isn't quality.

DaveDee · 04-24-2019, 06:35 PM

Quote:

Originally Posted by msan

Looks like the installer put the wrong muffler on each side

No.. it only goes on one way but the tips are not adjusted traditionally with the outer tips protruding around 5mm past the top of the bar and the inner tips the same, the result would normally be the inner tips are set around 10mm further out than the outer tips. These keeps all in a line when looking down from the top of the rear bar. There are set screws in the tips for adjustment so its very easy to change. They are adjustable so the system fits e90s as well as E92s with or without a rear diffuser. Normally they are set as in this pic

DaveDee · 04-24-2019, 06:39 PM

Quote:

Originally Posted by 8500RPM

Looks very nice for the price. Megan is temping for its price but it just bothers me to the core to get cheap stuff that isn't quality.

Absolutely, but there's nothing better than getting quality stuff at a fair price.

04-03-2018, 09:31 PM	#1
Dlpfcb Captain 483 Rep 647 Posts Drives: AW E92 M3 Join Date: Aug 2017 Location: Idaho iTrader: (1)	M3 World Exhaust I just visited there website and the valved version sounds awesome. Only came across one other thread on the exhaust but if anyone else is running it I would really like your opinion on how you like it from a quality and sound stand point. So far I spoke with Dave there and the Customer Service has already been top notch. https://m3world.com.au/product/exhau...n-with-valves/
	Appreciate 1 DaveDee532.00 Tweet Quote

04-05-2018, 07:21 PM	#2
cplagz First Lieutenant 90 Rep 389 Posts Drives: 2009 E90 M3 AlpineWeiss 3 Join Date: Jul 2015 Location: Perth,WA iTrader: (0) Garage List 2009 BMW M3 [0.00] 1986 BMW 325 [0.00]	Have a look in the Australia forum mate, plenty of us have the M3 World exhaust in various setups. I have the valved rear box with M3World HFC x-pipe. Closed, it has a nice note - deeper then stock, a little less rasp. Open the valves and I find it does drone a little from 2000-2250rpm so I don't usually just cruise around with it set open, only when I want to use the loud pedal a little more spiritedly then the aural experience is amazing. Build quality and fitment was great, I installed both lying on my garage floor in a few hours... including having to cut the tips shorter (I bought second hand E92 rear box and own an E90 M3)
	Appreciate 1 DaveDee532.00 Quote

04-06-2018, 01:58 AM	#4
antonyl Enlisted Member 9 Rep 37 Posts Drives: M3 CS Join Date: Nov 2017 Location: Melbourne iTrader: (0)	I have the xpipe with resonators and high flow cats , running stock rear section. It sounds fantastic, quiet at low throttle input and screams when you give it some. Build quality is excellent, easily fittment and quality welds.
	Appreciate 1 DaveDee532.00 Quote

04-11-2018, 07:36 PM	#5
cplagz First Lieutenant 90 Rep 389 Posts Drives: 2009 E90 M3 AlpineWeiss 3 Join Date: Jul 2015 Location: Perth,WA iTrader: (0) Garage List 2009 BMW M3 [0.00] 1986 BMW 325 [0.00]	Yes i would definitely recommend it, the workmanship is very good. I listened to a lot of different exhausts before choosing this one (Akra/Borla/Remus/Supersprint/MPE). It gives the car more of a deep V8 round then a raspier burble (like MPE does) or tinny drone at lower rpm (like Akra Ti)
	Appreciate 1 DaveDee532.00 Quote

04-12-2018, 04:24 PM	#7
BRNDNSLVRA 奈良シカマル 905 Rep 482 Posts Drives: 2011 Space Gray E90 M3 Join Date: Oct 2016 Location: Broward County, FL iTrader: (0)	The rear section sounds amazing! __________________ http://954mm.com IG: @954MM/@954M3
	Appreciate 0 Quote

04-12-2018, 07:57 PM	#9
'ringmeister Private First Class 43 Rep 124 Posts Drives: E92 M3 Join Date: May 2017 Location: New Jersey iTrader: (1)	Who sells their stuff in the US?
	Appreciate 0 Quote

04-16-2018, 05:46 PM	#13
cplagz First Lieutenant 90 Rep 389 Posts Drives: 2009 E90 M3 AlpineWeiss 3 Join Date: Jul 2015 Location: Perth,WA iTrader: (0) Garage List 2009 BMW M3 [0.00] 1986 BMW 325 [0.00]	I will take a video of mine today and reply for you with valves opened/closed. Just have to wait for the neighbours to wake up....
	Appreciate 0 Quote

04-16-2018, 06:53 PM	#15
Route 16 I got lei'd 844 Rep 7,593 Posts Drives: '10 E90 M3 Join Date: Sep 2011 Location: Dark Side of the Moon iTrader: (62)	I’m interested in their dual wall joining clamps https://m3world.com.au/product/dual-...oining-clamps/ Since I already have an iPE valved muffler and now looking into test pipes. Those clamps are really convenient if I have enough room to reuse my primary stock cats without welding anymore
	Appreciate 0 Quote

03-04-2019, 08:22 PM	#17
BoringBlue New Member 4 Rep 7 Posts Drives: 2008 335xi sedan Join Date: Aug 2015 Location: Thornton, CO iTrader: (0) Garage List 2008 BMW 335XI [0.00]	Just want to add to this thread a long overdue post... After a lot of looking and listening, I ended up buying the full exhaust from M3 World. Was a little concerned coming from Australia to Colorado, but they were amazing to deal with and I had zero problems receiving it. They had the tried and true vacuum valves, but were testing new electronic valves. I really liked that idea for the ease of install. Anyway, I have their very first set and love them. I have a wireless remote in the car and can open and shut the valves on a click. Highly recommend M3 World. The shipping and packaging was amazing and install was easy. And yes, love the sound. Quite enough for daily driving in the city and loud enough with the valves open to make you feel like your driving an M3... Attached Images
	Appreciate 1 DaveDee532.00 Quote

04-24-2019, 05:18 PM	#18
DaveDee Major 532 Rep 1,464 Posts Drives: BMW X5M Comp Join Date: Oct 2010 Location: Gold Coast Australia iTrader: (0) Garage List 2021 X5M Competition [0.00]	Thanks to everyone for the kind words and also local support and input. I missed this post and would have replied much earlier. I frequently ship systems internationally and it's no trouble to do so, in fact US buyers end up with a better deal due to the currency exchange and removal of local taxes, in effect getting 40% than local list price. These systems were originally setup for M3post members and m3world formed to offer some sanity in pricing M3post members get a 10% off current prices as costs have risen over the years and now the systems are priced as regular retail products. Any questions feel free to ask and again thanks for the awesome support over the years.
	Appreciate 1 iAjking25.50 Quote

04-24-2019, 06:30 PM	#20
8500RPM First Lieutenant 152 Rep 303 Posts Drives: 2012 M3 CP Join Date: Dec 2017 Location: Ft. Lauderdale, FL iTrader: (0)	Looks very nice for the price. Megan is temping for its price but it just bothers me to the core to get cheap stuff that isn't quality.
	Appreciate 0 Quote