|
|
07-01-2011, 04:09 PM | #1 |
YNWA
194
Rep 1,814
Posts |
Slight drip from exhaust connection areas HELP
EDIT: Ok so water seems to have stopped, but there seems to be the slightest bit of air coming out from a side of the clamps? Ive tried moving it around, but still seems to get there. Should I just keep trying to tighten? Thanks again for your help guys.
Hi guys, I just installed my axel back exhaust using challenge connecting pipes. Bolted on everything and dont feel any air coming out of the connection areas, but there is a water drip from each connection where the clamps are? I re-tightened but still small drip. Anyone know if this is an issue? Sounds like everything is ok, but not sure. Thanks, Dimitri
__________________
Imola Red ZCP F80 M3
Last edited by Cyrax91; 07-01-2011 at 05:28 PM.. |
07-01-2011, 05:11 PM | #4 |
YNWA
194
Rep 1,814
Posts |
Ok so water seems to have stopped, but there seems to be the slightest bit of air coming out from a side of the clamps? Ive tried moving it around, but still seems to get there. Should I just keep trying to tighten? Thanks again for your help guys.
__________________
Imola Red ZCP F80 M3
|
Appreciate
0
|
07-01-2011, 06:13 PM | #5 |
Private
0
Rep 69
Posts |
yeah baby, tighten those clamps!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|