Coding out EDC

[ichy]

Installing my kw club sports this weekend and wanted to see if there was some step by step instructions on coding out the edc. A friend of mine has the programs on his laptop but would need to know the steps in doing it. Any walkthrough would be great. Thanks in advance!

[derbo]

Originally Posted by ichy

Installing my kw club sports this weekend and wanted to see if there was some step by step instructions on coding out the edc. A friend of mine has the programs on his laptop but would need to know the steps in doing it. Any walkthrough would be great. Thanks in advance!

If you search, its out there. :P

## Code out edc
1) Disconnect EDC module. It's located on the passenger side rear quarter panel, accessible through the trunk. It's the module with 2 connectors (white and blue). Can't miss it.
2) Remove option $233 from Vehicle Order in CAS using FA_write; then change ECU and FA_write the NFRM.
3) In KOMBI set EDCK_ALIVE_ZAEHLER to nicht_aktiv and EDCK_ID_MONITOR to nicht_aktiv.
4) If you have the first gen idrive (08) in CAPPL set EDC to nicht_aktiv. / if you have the later idrive in CIC set EDC_CIC to nicht_aktiv