BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > BIMMERPOST Universal Forums > Off-Topic Discussions Board
 
Post Reply
 
Thread Tools Search this Thread
      05-21-2018, 05:27 PM   #1
jaye944
Captain
No_Country
1007
Rep
638
Posts

Drives: a
Join Date: Jul 2015
Location: a

iTrader: (0)

Tool me, school me

So socket set's.

I had fun with the BMW this weekend...

Anyway , trying to work out if I have a 1/4" 1/2" and the wrong extenders not fitting, and having to get adapters and all that kinda crap...

So, let's take it slow in baby steps, assume I know jack LOLZ

I'm trying to arrange my tools

so why 1/4 3/8 1/2 3/4

I'm guessing the bigger "number" gives better torque, I kinda also understand dif between 6 ptr and 12 ptr sockets, but why is ther 12 (or is it 16) if 6 gives better grip

Should I get 2 full socket set's I think I have a mixture of a "big" one and a "Small" one , so I'm guessing 3/8" and maybe a 1/2 (or 3/4")

Not worried about makes, just trying to get my head round what I need, how to organise it and why ?

LOLZ

txs
Appreciate 0
      05-21-2018, 05:32 PM   #2
RABAUKE
Banned
Canada
4653
Rep
1,395
Posts

Drives: Porsche 993, 2014 MB GLK
Join Date: Jan 2015
Location: The Golden Horseshoe, Ontario

iTrader: (0)

Appreciate 2
jaye9441007.00
King Rudi13152.00
      05-21-2018, 06:17 PM   #3
jaye944
Captain
No_Country
1007
Rep
638
Posts

Drives: a
Join Date: Jul 2015
Location: a

iTrader: (0)

that's cool,

so 3/8"s and 1/2"

I'll see and get a set which encompasses them,

thxsnk

however anyone else feel free to chime it, dats cool as well
Appreciate 0
      05-21-2018, 06:19 PM   #4
1MOREMOD
-
1MOREMOD's Avatar
United_States
11815
Rep
23,187
Posts

Drives: Race car->
Join Date: Mar 2009
Location: check your mirrors

iTrader: (5)

I have 1/4 also but for little stuff, not for car.
Appreciate 1
jaye9441007.00
      05-21-2018, 06:39 PM   #5
Emilime75
Colonel
1209
Rep
2,476
Posts

Drives: 2010 335i E92 LeMans Blue
Join Date: Dec 2017
Location: Merica!

iTrader: (1)

3/8" drive is by far the mostly used, followed by 1/4" and then 1/2" not too far behind...but, I feel all 3 are necessary.

1/4" for nuts/bolts ranging from roughly 13mm and smaller.
3/8" for the 10mm to 17mm range.
1/2" for things larger than 17mm.

Things overlap sometimes, and you may find yourself needing the leverage of a larger/longer 1/2" ratchet, with a smaller socket. Things like brakes and suspension work would be examples.

SK makes some really good sets that fall in line between Craftsman and Snapon pricing, yet are really good tools with lifetime warranty. I've had mine for over 20 years and they're still going strong. They're also all 6 point.

Of course, you now also need a good E Torx set and 1/4", 3/8" and 1/2” torque wrench set more than ever before with all of the aluminum and yield to torque bolts used these days.
Appreciate 1
jaye9441007.00
      05-21-2018, 07:27 PM   #6
519.E82
Lieutenant
519.E82's Avatar
Canada
243
Rep
439
Posts

Drives: BMW 128i Sport (Non M)
Join Date: Apr 2016
Location: Ontario, Canada

iTrader: (0)

Since your in Canada i will recommend you get this. It will have everything you need except a tool box for the sections it has but you can just put it back in the cardboard. I bought this when i was starting college and it will have essentially every tool you will need (depending on what you want to do)
http://www.canadiantire.ca/en/pdp/ma...-0589295p.html

ignore the price it is very commonly on for $249 - 299 instore or in some cases as low as $199
__________________
2008 SGM 128i - 3 Stage IM - 130i Tune - Dinan Camber Plates - BMW PE - Injen Intake - 1M Mirrors - LCI Blacklines - M4 Spoiler - Blacked 263's - Aero Bumper - Aero Side Skirts - OMGSplitter - AFE Intake Scoops
Appreciate 1
jaye9441007.00
      05-22-2018, 05:43 AM   #7
jaye944
Captain
No_Country
1007
Rep
638
Posts

Drives: a
Join Date: Jul 2015
Location: a

iTrader: (0)

great explanation !

Quote:
Originally Posted by Emilime75 View Post
3/8" drive is by far the mostly used, followed by 1/4" and then 1/2" not too far behind...but, I feel all 3 are necessary.

1/4" for nuts/bolts ranging from roughly 13mm and smaller.
3/8" for the 10mm to 17mm range.
1/2" for things larger than 17mm.

Things overlap sometimes, and you may find yourself needing the leverage of a larger/longer 1/2" ratchet, with a smaller socket. Things like brakes and suspension work would be examples.

SK makes some really good sets that fall in line between Craftsman and Snapon pricing, yet are really good tools with lifetime warranty. I've had mine for over 20 years and they're still going strong. They're also all 6 point.

Of course, you now also need a good E Torx set and 1/4", 3/8" and 1/2” torque wrench set more than ever before with all of the aluminum and yield to torque bolts used these days.
Appreciate 0
      05-22-2018, 05:47 AM   #8
jaye944
Captain
No_Country
1007
Rep
638
Posts

Drives: a
Join Date: Jul 2015
Location: a

iTrader: (0)

Looks like a good set, 749+tax
I'll keep a watch on it. I would have about 1/2 - 3/4's of that stuff, I just bought a round of tools recently

so the socket set/sets is what I'm trying to concentrate on,
especially (as I said) after my "fun" time with the BMW

Quote:
Originally Posted by 519.E82 View Post
Since your in Canada i will recommend you get this. It will have everything you need except a tool box for the sections it has but you can just put it back in the cardboard. I bought this when i was starting college and it will have essentially every tool you will need (depending on what you want to do)
http://www.canadiantire.ca/en/pdp/ma...-0589295p.html

ignore the price it is very commonly on for $249 - 299 instore or in some cases as low as $199
Appreciate 0
      05-22-2018, 07:30 AM   #9
King Rudi
Lieutenant Colonel
King Rudi's Avatar
13152
Rep
1,965
Posts

Drives: Meat Suit
Join Date: Sep 2017
Location: Planet Earth

iTrader: (0)

I used to be a purchasing coordinator for a company and my entire job was purchasing tools. All the recommendations here have been spot on. I can't really give any further input that would compound anything stated above. If you get to where you are needing wrenches and don't mind spending the money on a set that you will really enjoy working with check out Wera Joker series I've actually had a hard time finding anything that Wera makes not to be great. Amazing tools.
Appreciate 0
      05-22-2018, 07:51 AM   #10
tdott
Brigadier General
3932
Rep
3,972
Posts

Drives: M3
Join Date: Nov 2010
Location: South FL / 6ix

iTrader: (4)

I bought these trays from Harbor Freight, and been trying to fill them up.
Do you need everything in all sizes? No, but it's helpful for certain jobs.
Few recent additions not shown in this pic.

Appreciate 3
King Rudi13152.00
jaye9441007.00
Dang3r12503.00
      05-22-2018, 08:04 AM   #11
stevenc
Coming Soon
United_States
254
Rep
960
Posts

Drives: 2015 BMW M4 Alphine White MT
Join Date: Apr 2008
Location: Houston, TX

iTrader: (0)

Just get a good craftsman set. Its a perfect place to start

http://www.sears.com/craftsman-230-p...2&blockType=G2
Appreciate 2
BM235iW97.00
jaye9441007.00
      05-22-2018, 08:11 AM   #12
tdott
Brigadier General
3932
Rep
3,972
Posts

Drives: M3
Join Date: Nov 2010
Location: South FL / 6ix

iTrader: (4)

Quote:
Originally Posted by Not_Judy View Post
Wera Joker series
$450 for an 11 peice metric set?
https://www.amazon.com/Wera-05020091...rds=Wera+Joker

Unless you are a professional mechanic, I don't see any normal person spending that much on a set. They do look great.
Appreciate 1
jaye9441007.00
      05-22-2018, 08:20 AM   #13
nomade30
Private First Class
123
Rep
168
Posts

Drives: 18 M2, 91 325, 05 DMAX
Join Date: Apr 2017
Location: UT

iTrader: (0)

Kolbalt is pretty much the best entry level tool sets you can get now. Craftsman has reports of rusting sockets since around 4-5 years ago. Please try to use 6pt on 6pt nuts/bolts and 12 pt on 12 pt nuts/bolts.
Appreciate 1
jaye9441007.00
      05-22-2018, 08:50 AM   #14
King Rudi
Lieutenant Colonel
King Rudi's Avatar
13152
Rep
1,965
Posts

Drives: Meat Suit
Join Date: Sep 2017
Location: Planet Earth

iTrader: (0)

Quote:
Originally Posted by tdott View Post
$450 for an 11 peice metric set?
https://www.amazon.com/Wera-05020091...rds=Wera+Joker

Unless you are a professional mechanic, I don't see any normal person spending that much on a set. They do look great.
Good tools aren't cheap. Looks don't play a part, it's all ergonomics. The handles are designed to fit the palm of your hand. The fact that they hold nuts while being tightened is the biggest selling point.

Quote:
Originally Posted by nomade30 View Post
Kolbalt is pretty much the best entry level tool sets you can get now. Craftsman has reports of rusting sockets since around 4-5 years ago. Please try to use 6pt on 6pt nuts/bolts and 12 pt on 12 pt nuts/bolts.
I disagree. You can literally bend a pair of their pliers by hand. The people I bought tools for were completely against using anything Kobalt. I will say that I have a set of the Kobalt Extreme Access sockets and they are amazing. The sockets fit metric and SAE to reduce the number of tools needed and there is no need for shallow or deep well, they fit everything as the bolt passes through the middle. Aside from these tools I avoid anything branded Kobalt. I'm not a big fan of Craftsman anymore either. After 5-6 years ago they seem to mass produce garbage.

Last edited by King Rudi; 05-22-2018 at 09:00 AM..
Appreciate 0
      05-22-2018, 09:15 AM   #15
PINeely
Lieutenant Colonel
PINeely's Avatar
United_States
1086
Rep
1,912
Posts

Drives: 2013 535i, 2015 Tundra 1794
Join Date: Jul 2009
Location: Jackson, MS

iTrader: (2)

I use almost exclusively 3/8. A 1/2 ratchet with a 1/2f-3/8m adaptor will get you out of many troubles too.

Don't waste your time with Craftsman, they moved their manufacturing to Asia a few years ago and quality went way down but the prices stayed the same. Still OK tools but Harbor Freight or Northern Tool are an equivalent tool for cheaper with the same lifetime warranty. You do get what you pay for with tools, but those should be good for most home DIYers. Buy a set and replace the high-use ones (8, 10, 12, 14, 17) with better as they get lost or fail. Get 6 point, I hardly ever see 12pt fasteners and I've been doing this for a long time, all 12pt sockets do is round off 6pt bolt heads.

Some BMW spark plugs are 12pt 14mm deep socket with a thin wall profile. Get the schwaben socket, it works great and some of the others are too thick to fit.

Spend some extra money on the following:
-Frequent use tools like ratchets
-"Oops" tools- stripped bolt extractors, thread chasers, breaker bars, basically anything that's going to get you out of a bind.
-Tools specific to your car (check out OTC tools and assenmacher for a lot of the euro car tools)
-Diagnostic tools and measuring tools, for God's sake I can't believe the number of people who cheap on these things, how are you going to fix it if you don't have an accurate measurement to begin with! A good multimeter is especially important.

Last edited by PINeely; 05-22-2018 at 09:31 AM..
Appreciate 1
King Rudi13152.00
      05-22-2018, 09:49 AM   #16
CTinline-six
Hoonigan
CTinline-six's Avatar
United_States
6812
Rep
3,000
Posts

Drives: '09 328i, '98 Wrangler
Join Date: Dec 2016
Location: Connecticut

iTrader: (0)

Garage List
Quote:
Originally Posted by Not_Judy View Post
Good tools aren't cheap. Looks don't play a part, it's all ergonomics. The handles are designed to fit the palm of your hand. The fact that they hold nuts while being tightened is the biggest selling point.



I disagree. You can literally bend a pair of their pliers by hand. The people I bought tools for were completely against using anything Kobalt. I will say that I have a set of the Kobalt Extreme Access sockets and they are amazing. The sockets fit metric and SAE to reduce the number of tools needed and there is no need for shallow or deep well, they fit everything as the bolt passes through the middle. Aside from these tools I avoid anything branded Kobalt. I'm not a big fan of Craftsman anymore either. After 5-6 years ago they seem to mass produce garbage.

Craftsman is garbage now. Their older stuff was really just okay, but all the newer tools are made in China, especially their "evolve" line. I had one of the 3/8" evolve ratchets and the mechanism broke inside while I was tightening something, causing my hand to slam against a suspension component on my Jeep. I never threw a ratchet so far, haha. Sears would only replace it with an even cheaper looking beat up ratchet. I went on ebay and bought a used made in USA S/K tools ratchet in great shape for $8.

Most of my ratchets are now S/K, older craftsman, or a 1/4" set from Autozone that I use once in awhile. I use my DeWalt battery impact for most things now.
__________________
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."

-Dr. Ian Malcolm, Jurassic Park
Appreciate 1
King Rudi13152.00
      05-22-2018, 09:52 AM   #17
CTinline-six
Hoonigan
CTinline-six's Avatar
United_States
6812
Rep
3,000
Posts

Drives: '09 328i, '98 Wrangler
Join Date: Dec 2016
Location: Connecticut

iTrader: (0)

Garage List
Quote:
Originally Posted by PINeely View Post

Spend some extra money on the following:
-Frequent use tools like ratchets
-"Oops" tools- stripped bolt extractors, thread chasers, breaker bars, basically anything that's going to get you out of a bind.
-Tools specific to your car (check out OTC tools and assenmacher for a lot of the euro car tools)
-Diagnostic tools and measuring tools, for God's sake I can't believe the number of people who cheap on these things, how are you going to fix it if you don't have an accurate measurement to begin with! A good multimeter is especially important.
Yes, the measuring tools are very important. I cringe when I see people torquing critical engine components with a $9 Harbor Freight torque wrench.
__________________
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."

-Dr. Ian Malcolm, Jurassic Park
Appreciate 3
King Rudi13152.00
BM235iW97.00
jaye9441007.00
      05-22-2018, 11:21 AM   #18
King Rudi
Lieutenant Colonel
King Rudi's Avatar
13152
Rep
1,965
Posts

Drives: Meat Suit
Join Date: Sep 2017
Location: Planet Earth

iTrader: (0)

Quote:
Originally Posted by PINeely View Post
I use almost exclusively 3/8. A 1/2 ratchet with a 1/2f-3/8m adaptor will get you out of many troubles too.

Don't waste your time with Craftsman, they moved their manufacturing to Asia a few years ago and quality went way down but the prices stayed the same. Still OK tools but Harbor Freight or Northern Tool are an equivalent tool for cheaper with the same lifetime warranty. You do get what you pay for with tools, but those should be good for most home DIYers. Buy a set and replace the high-use ones (8, 10, 12, 14, 17) with better as they get lost or fail. Get 6 point, I hardly ever see 12pt fasteners and I've been doing this for a long time, all 12pt sockets do is round off 6pt bolt heads.

Some BMW spark plugs are 12pt 14mm deep socket with a thin wall profile. Get the schwaben socket, it works great and some of the others are too thick to fit.

Spend some extra money on the following:
-Frequent use tools like ratchets
-"Oops" tools- stripped bolt extractors, thread chasers, breaker bars, basically anything that's going to get you out of a bind.
-Tools specific to your car (check out OTC tools and assenmacher for a lot of the euro car tools)
-Diagnostic tools and measuring tools, for God's sake I can't believe the number of people who cheap on these things, how are you going to fix it if you don't have an accurate measurement to begin with! A good multimeter is especially important.
+1 on bolt extractors and measuring instrumentation.
Appreciate 1
BM235iW97.00
      05-22-2018, 11:44 AM   #19
jgoens
Major General
jgoens's Avatar
3788
Rep
5,776
Posts

Drives: 2013 335i msport
Join Date: Nov 2014
Location: San Mateo, CA

iTrader: (0)

What I have found is buying decent tools is always a good investment. You don't necessaily need to go out and get a huge set all at once.
Add tools and parts as you need them. Certain torx sockets like the one for removing the strut brace are specialty as is the spark plug socket.

I was installing wheel spacers yesterday and took off my wheels until I got to a wheel with a semi stripped bolt. I was using a 12point 17mm with breaker bar.

The wheel lugs are 6pt which I don't own. Borrowed a neighbor's 17 mm 6 point and snapped it. Ended up going to a gas station to have a friend loosen it with a pneumatic 6pt. So, no matter what you plan, you never know when something else is needed.
Appreciate 1
jaye9441007.00
      05-22-2018, 12:09 PM   #20
jaye944
Captain
No_Country
1007
Rep
638
Posts

Drives: a
Join Date: Jul 2015
Location: a

iTrader: (0)

on my 128i, uses standard deep reach, but coulndt shift it without a 6pt and breaker bar

*rest* agreed

Quote:
Originally Posted by PINeely View Post
Some BMW spark plugs are 12pt 14mm deep socket with a thin wall profile. Get the schwaben socket, it works great and some of the others are too thick to fit.
Appreciate 0
      05-22-2018, 12:42 PM   #21
nomade30
Private First Class
123
Rep
168
Posts

Drives: 18 M2, 91 325, 05 DMAX
Join Date: Apr 2017
Location: UT

iTrader: (0)

Quote:
Originally Posted by Not_Judy View Post
I disagree. You can literally bend a pair of their pliers by hand. The people I bought tools for were completely against using anything Kobalt. I will say that I have a set of the Kobalt Extreme Access sockets and they are amazing. The sockets fit metric and SAE to reduce the number of tools needed and there is no need for shallow or deep well, they fit everything as the bolt passes through the middle. Aside from these tools I avoid anything branded Kobalt. I'm not a big fan of Craftsman anymore either. After 5-6 years ago they seem to mass produce garbage.
Ever since playing with some of their stuff, it seems to be better than what you get with craftsman or husky. I'm not saying they are snap on quality, but it doesn't sound like the OP needs high quality just something to get him started. If I were to somehow lose all my tools today and didn't have insurance to cover them, I would definitely end up with a set of kobalt tools. But that said I have a tool box full of snap on and knipex and old craftsman stuff, and if you're wrenching on the regular high quality tools really do make a difference.
Appreciate 1
King Rudi13152.00
      05-22-2018, 01:00 PM   #22
King Rudi
Lieutenant Colonel
King Rudi's Avatar
13152
Rep
1,965
Posts

Drives: Meat Suit
Join Date: Sep 2017
Location: Planet Earth

iTrader: (0)

Quote:
Originally Posted by nomade30 View Post
Ever since playing with some of their stuff, it seems to be better than what you get with craftsman or husky. I'm not saying they are snap on quality, but it doesn't sound like the OP needs high quality just something to get him started. If I were to somehow lose all my tools today and didn't have insurance to cover them, I would definitely end up with a set of kobalt tools. But that said I have a tool box full of snap on and knipex and old craftsman stuff, and if you're wrenching on the regular high quality tools really do make a difference.
I'll agree with that. Knipex is definitely an overlooked brand! All of my Craftsman tools belonged to my father; I inherited them he passed a few years ago. I can remember him getting excited when K-Mart started selling them because he could get their stuff for cheap. I still remember the conversation of trying to explain their lack of structural integrity with current manufacturing. It did not go well. Some people get stuck on a brand and you can't tell them any differently.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:03 AM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST