Rod Bearing Service In Atlanta

[vincE92M3]

Has anyone had their rob bearings serviced in Atlanta?

I've gotten a quote from Technica Motorsports and inquired at Markert Motorsports, but haven't heard back yet.

Technica's quote seems to be in line with what I think other shops are charging, from reading these forums.

[iBoosted]

My last quote was 3k with VAC bearings from Markert a few months ago.

[vincE92M3]

Originally Posted by iBoosted

My last quote was 3k with VAC bearings from Markert a few months ago.

I was quoted $24xx from Technica for VAC and ARP rod bolts.

[alim3]

Go with Technica, great shop

[iBoosted]

Originally Posted by vincE92M3

I was quoted $24xx from Technica for VAC and ARP rod bolts.

That seem's about average. I've only heard good things about both shops.

Any particular reason you are doing yours besides preventative maintenance?

Random, but I think we met once at AMP lol

[vincE92M3]

Originally Posted by iBoosted

That seem's about average. I've only heard good things about both shops.

Any particular reason you are doing yours besides preventative maintenance?

Random, but I think we met once at AMP lol

Did you have the black E92 M3? Santa Run @ AMP?

I was starting to look into the rod bearings, since my extended warranty ends next month.

Trying to gauge how much I should set aside and where to get it done when the time comes.

Other than that, mainly as a precaution. I have 48k miles on my 2011.

[GMWNashville]

Make sure its apples to apples-we generally quote the job with replacement engine mounts too.

[vincE92M3]

Originally Posted by GMWNashville

Make sure its apples to apples-we generally quote the job with replacement engine mounts too.

Are you a shop in Nashville? Can you DM me a quote please?

[iBoosted]

Originally Posted by vincE92M3

Did you have the black E92 M3? Santa Run @ AMP?

I was starting to look into the rod bearings, since my extended warranty ends next month.

Trying to gauge how much I should set aside and where to get it done when the time comes.

Other than that, mainly as a precaution. I have 48k miles on my 2011.

I don't remember, probably. I just remember a Silverstone e92 with Apex wheels. I wasn't driving that day just hanging out. I don't like AMP very much lol.

[spazzyfry123]

Originally Posted by vincE92M3

I was quoted $24xx from Technica for VAC and ARP rod bolts.

What did you end up doing? My car has been to Markert a few times for little things here and there with top notch service. Curious about Technica; I've heard from quite a few that they are a bit $$$

[vincE92M3]

Originally Posted by spazzyfry123

What did you end up doing? My car has been to Markert a few times for little things here and there with top notch service. Curious about Technica; I've heard from quite a few that they are a bit $$$

I haven't completed the service yet. Technica's quote actually came in at the lowest, while Markert was on the higher end.

[spazzyfry123]

Originally Posted by vincE92M3

I haven't completed the service yet. Technica's quote actually came in at the lowest, while Markert was on the higher end.

Just curious what the differences in price were - apples to apples - if you don't mind.

As a side note, I really like Markert's warranty. 5 years / 60k miles on all work.

[2013E92M3ZCP]

I’d be very interested in hearing someone that went to either Markert or Technica. I’m considering doing it soon with VAC increased clearance bearings / calico and ARP rod bolts but only want someone that’s very skilled in this. I have a low mileage M3 and don’t want someone to practice on my car. I want someone that takes their time and does the job right. Would love to hear from someone on M3 post that isn’t biased (I don’t trust reviews on a shops site). Willing to drive further than Atlanta if needed.

[sc30317]

I get all of my M3 and X5 work done at Markert. Dave and Rob do an awesome job. They’ve done tons of rod bearings and they know what they are doing.

[mcculloughl2]

I received a quote from Markert for rod bearings but they were using BE bearings with my quote. Anyone have any experience with BE? Price was around $2700.

I plan to get this done in the next couple months also.

[2013E92M3ZCP]

Let us know how the pricing ends up and the experience is when you do. When I do it, I’m probably going VAC/Clevite/Calico and ARP.

Originally Posted by mcculloughl2

I received a quote from Markert for rod bearings but they were using BE bearings with my quote. Anyone have any experience with BE? Price was around $2700.

I plan to get this done in the next couple months also.

[sc30317]

Originally Posted by mcculloughl2

I received a quote from Markert for rod bearings but they were using BE bearings with my quote. Anyone have any experience with BE? Price was around $2700.

I plan to get this done in the next couple months also.

Those are the ones they used on my car. So far so good

[dmk08]

Originally Posted by mcculloughl2

I received a quote from Markert for rod bearings but they were using BE bearings with my quote. Anyone have any experience with BE? Price was around $2700.

I plan to get this done in the next couple months also.

BE Bearings is what I want but I'm going to have them done at Technica I think. The leader of M Atlanta had his E60 ones done there and was very happy.

[vincE92M3]

I think I'll be going with Technica as well. They've been easy to work with and won't charge extra for providing your own parts or even replacing the motor mounts at the same time.

[cmo_93]

Lin's Specialty Automotive is where I go consistently.

Been to Markert once before. Good; but expensive

[elm3]

I'm getting mine done at Bimmers Service, but I'm not paying anything, just for the parts. I got the hook up. I will be helping to do them too though. I'm using VAC and ARP bolts.

[vincE92M3]

Anyone get theirs done recently and care to share their experience?