Sponsored by The Tire Rack

[Track/S]

Originally Posted by tsk94

I assume you needed the spacer to clear the spring/strut? It looks very pokey lol. And based on that being an effective 11" +15, I'd think so, especially with only -2* camber.

Could use a 12mm spacer, but since it will have -3.5 camber, it will work great.

[tsk94]

Originally Posted by Track/S

Could use a 12mm spacer, but since it will have -3.5 camber, it will work great.

The extra camber will do a lot for the fitment.
What suspension does the car have to need the 15mm spacer?

[Track/S]

Originally Posted by tsk94

The extra camber will do a lot for the fitment.
What suspension does the car have to need the 15mm spacer?

Nitron R3

[dcarlos]

Originally Posted by GewoW

Bfg r1 275/35/18
9.5 wheel (too small)
Effective et 11 (9.5 et 23 + 12mm spacer)

Rear is 9.5 with 10mm spacer
Same tire

What a tire

Will likely switch the spacers

FYI, -3.6 camber front

Would there be any fender rub up front running 275/35/18 on 18x9.5 +22 wheels ? I've got stock non ZCP suspension.

[M3SQRD]

Originally Posted by dcarlos

Would there be any fender rub up front running 275/35/18 on 18x9.5 +22 wheels ? I've got stock non ZCP suspension.

No. 18x9.5et22 with a 275/35-18 tire are a commonly used wheel and tire size. I actually run that exact combination and there’s no rubbing issues.

[Route 16]

Originally Posted by StripclubDJ

I’ll pm you

what's the specs?