DIY E93 RGBW DTM BLACK-OP w/ SWITCHBACK EYEBROW (Completed)

[SaNGRia]

Originally Posted by SYT_Shadow

I've seen them in person, they look stunning!

Thank you buddy! Every time I open the garage, I am just admiring how they look!

[acarr6]

what did you tap the switchback into? my halos are just staying orange after i tapped into the corner light..

[Powashiftin]

Originally Posted by SaNGRia

1- RGB-W DTM Style Rings
2- 2 set of ZKW-R Lens
3- 2 set of Demon Eyes
4- Set of eyebrow
5- 4 Switchback led strip (17 inch)
6- 3D Printed LCI Style Turn signal bezel
7- Acrylic clear plastic sheet
8- 2 Oem clear cover (For those who has scratches and chips on the headlight cover, otherwise it will not look good)
9- Butyl Tape
10- Dremell with metal saw
11- Heat Gun
12- Soldering machine

Where did you get your materials from? Like the lci corner?

[SaNGRia]

Originally Posted by Powashiftin

Where did you get your materials from? Like the lci corner?

From the boss called Bav Gruppe! Ebay it, he is "the guy"

[SaNGRia]

Originally Posted by acarr6

what did you tap the switchback into? my halos are just staying orange after i tapped into the corner light..

You need the use the white cable as a positive connection where the turn signal housing is! And you can connect the negative cable where the angel eyes getting the power!

[SaNGRia]

Here is the recent video of IG : _theblackm3_

[acarr6]

Originally Posted by SaNGRia

You need the use the white cable as a positive connection where the turn signal housing is! And you can connect the negative cable where the angel eyes getting the power!

thats what i did, but basically the orange is working with the corner light. So if headlight switch is "off" then halo is white, and orange when turn signal, then back to white. If headlight is "on" position, halo is orange (with corner light). If i program the corner light off, this should correct the issue i think?

[SaNGRia]

Originally Posted by acarr6

thats what i did, but basically the orange is working with the corner light. So if headlight switch is "off" then halo is white, and orange when turn signal, then back to white. If headlight is "on" position, halo is orange (with corner light). If i program the corner light off, this should correct the issue i think?

I don't understand. If you use the negative cable from angel eye's original plug that should not effect angel eye rings whether headlight switch is on or off unless your car came with halogen headlights! Angel eyes are managed from the idrive and it will not go off when the headlights are on or off unless you change the settings from the idrive!

[ezaziz]

I know this is an old thread but I'm really interested on where you got the led strips and the brow from?

[SaNGRia]

Originally Posted by ezaziz

I know this is an old thread but I'm really interested on where you got the led strips and the brow from?

bavgruppedesigns

[The-Traveler]

What size washers you guys using? I started with the Zkw-r and I’m getting yellow cutoff.

[SaNGRia]

Originally Posted by The-Traveler

What size washers you guys using? I started with the Zkw-r and I’m getting yellow cutoff.

if u want to emphasize the blue you need to remove the metal piece where its located on cut off shield!

[The-Traveler]

Originally Posted by SaNGRia

if u want to emphasize the blue you need to remove the metal piece where its located on cut off shield!

It looked great after I did that, but once it was back in the headlight housing, and the lenses were glued on the yellow came back.

[SaNGRia]

Originally Posted by The-Traveler

It looked great after I did that, but once it was back in the headlight housing, and the lenses were glued on the yellow came back.

I dont have that issue on my ZKW-R with single washer all around! But i do use this. It might change the game!