Awron Gauge question

[andrewkd16]

Hey everyone had some work done on the car and I know that the gauge was taken out and put back in. Went into the shop and display was in English but comes out and it’s reading in German now. I figured out how to dim it and get to the part where it displays “service” but not sure how to scroll through anything for language on our platform. Everything online I saw shows how to do it for the f80 but can’t figure it out for our e9x.

Please help! Thanks everyone.

[BESTNDA416]

Same I need mine back to English also really annoying seeing it in German

[m3boost]

Originally Posted by andrewkd16

Hey everyone had some work done on the car and I know that the gauge was taken out and put back in. Went into the shop and display was in English but comes out and it’s reading in German now. I figured out how to dim it and get to the part where it displays “service” but not sure how to scroll through anything for language on our platform. Everything online I saw shows how to do it for the f80 but can’t figure it out for our e9x.

Please help! Thanks everyone.

In order to change anything you need to plug the USB cable to your computer and use the software included with the gauge, the company went under so if you can source it let us know.

edit:

https://web.archive.org/web/20180404...upe-lci-e9xdga

Click Software tab, then download



Files saved here also:
https://gofile.io/d/UBX5SP


Instructions:

Unzip AWRON_DGA_Tool.zip
Connect the gauge to Windows PC via USB
If Windows asks for a driver, provide the path to the folder AWRON_DGA_Driver_Windows
Run AWRON_DGA_Tool_VX.X
Set language, units, and speed.
Press Write Config
Close the program and disconnect the gauge.

[msan]

Do you know where I can get the driver? I don't see it in the zip file...Thanks in advance!!

Originally Posted by m3boost

In order to change anything you need to plug the USB cable to your computer and use the software included with the gauge, the company went under so if you can source it let us know.

edit:

https://web.archive.org/web/20180404...upe-lci-e9xdga

Click Software tab, then download



Files saved here also:
https://gofile.io/d/UBX5SP


Instructions:

Unzip AWRON_DGA_Tool.zip
Connect the gauge to Windows PC via USB
If Windows asks for a driver, provide the path to the folder AWRON_DGA_Driver_Windows
Run AWRON_DGA_Tool_VX.X
Set language, units, and speed.
Press Write Config
Close the program and disconnect the gauge.

[Ghostwashere]

I know it’s an old post… but any chance anyone still have the files? I’ve been looking through old forums all day with no luck.
I’m trying to change the language to English as well 😂

[darkbmw]

The software only works with laptop using xp. I found a cheap one on Facebook market and it worked after I up loaded the awron file to it