ZCP's with spacers...?

chris s · 09-17-2010, 08:22 PM

Can you use a 15/12mm setup?

If not, what works well?

11' AW M3 · 09-17-2010, 08:37 PM

The recommended setup is 12/5, but this will not lead to your wheels being flush with the fender. I have this setup, and, while an improvement, is not aggressive enough for me. I am going to go with a 15/10 setup myself. I think 10 is more than enough for the rear.

Does anyone know if I will have any rubbing issues at ZCP height with 255/35/19 tires up front with 15 mm spacers and 285/30/19 rears with 10mm spacers?

chris s · 09-17-2010, 08:41 PM

so 15/12 might work with a 255/275 setup...and most definitely with OEM sizes?

TUNEDM3 · 09-19-2010, 09:41 AM

Chris..I have test fit a friends wheel on my sedan, which are the same size and offset in the rear as the ZCP wheel (19x10 et25). With a 275/35/18 tire and a 10mm spacer I had tons of room. I think a 12mm should be a non issue.

09-17-2010, 08:22 PM	#1
chris s Major General 1333 Rep 6,938 Posts Drives: 2022 Dravit G80 M3 Join Date: Oct 2008 Location: New York iTrader: (12)	ZCP's with spacers...? Can you use a 15/12mm setup? If not, what works well? __________________ 2022 Dravit/Fiona M3cx - Dinan midpipe w/VC, NW Carbonhaus CF, AST Springs, FC Spacers...more to come! 2016 Indi F80 M3 - SMB\|Amaro \| Mode Carbon \| ESS \| Akra EVO \| KW HAS...SOLD 2012 MR e92 M3 DCT, ESS SC, Brembo BBK, BBS FI... GONE but not forgotten! 2008 AW e92 M3 6MT, ESS SC, BBS LM's...SOLD!
	Appreciate 0 Tweet Quote

09-17-2010, 08:37 PM	#2
11' AW M3 Major 83 Rep 1,245 Posts Drives: 11' ZCP E92 M3 Join Date: May 2009 Location: california iTrader: (2)	The recommended setup is 12/5, but this will not lead to your wheels being flush with the fender. I have this setup, and, while an improvement, is not aggressive enough for me. I am going to go with a 15/10 setup myself. I think 10 is more than enough for the rear. Does anyone know if I will have any rubbing issues at ZCP height with 255/35/19 tires up front with 15 mm spacers and 285/30/19 rears with 10mm spacers? __________________ 2011 AW/FR Extended E92 M3... fully loaded
	Appreciate 0 Quote

09-17-2010, 08:41 PM	#3
chris s Major General 1333 Rep 6,938 Posts Drives: 2022 Dravit G80 M3 Join Date: Oct 2008 Location: New York iTrader: (12)	so 15/12 might work with a 255/275 setup...and most definitely with OEM sizes? __________________ 2022 Dravit/Fiona M3cx - Dinan midpipe w/VC, NW Carbonhaus CF, AST Springs, FC Spacers...more to come! 2016 Indi F80 M3 - SMB\|Amaro \| Mode Carbon \| ESS \| Akra EVO \| KW HAS...SOLD 2012 MR e92 M3 DCT, ESS SC, Brembo BBK, BBS FI... GONE but not forgotten! 2008 AW e92 M3 6MT, ESS SC, BBS LM's...SOLD!
	Appreciate 0 Quote

09-19-2010, 09:41 AM	#4
TUNEDM3 Stay Ripping 60 Rep 550 Posts Drives: 1M Join Date: Sep 2008 Location: New York iTrader: (4)	Chris..I have test fit a friends wheel on my sedan, which are the same size and offset in the rear as the ZCP wheel (19x10 et25). With a 275/35/18 tire and a 10mm spacer I had tons of room. I think a 12mm should be a non issue. __________________ THE GOBBLER- S.O.H
	Appreciate 0 Quote