|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
10-20-2020, 10:12 AM | #1 |
Captain
578
Rep 940
Posts |
All- I'm running 5mm Turner spacers on the front and all I have is a sliver of hub to mount my wheels on due to my bbs wheels having a little lip on their mounting points. The ride is silky smooth all the way up to 100.
Is this safe?
__________________
2013 e92 M3
2011 X5 35d 2018 F80 M3 ZCP Last edited by DL335D; 10-20-2020 at 10:21 AM.. |
10-20-2020, 08:34 PM | #2 |
F15 daddymobile
2330
Rep 3,496
Posts |
It's not ideal but shouldn't be an issue. The little lip doesn't bear weight once the wheel bolts are torqued to spec
__________________
|
Appreciate
0
|
10-20-2020, 08:39 PM | #3 |
Captain
578
Rep 940
Posts |
^ good to know. Thanks for the help. The spacers might have to go after all as I'm getting some serious rubbing up front with my 255/35/19 tires.
__________________
2013 e92 M3
2011 X5 35d 2018 F80 M3 ZCP |
Appreciate
0
|
10-21-2020, 06:35 AM | #4 |
Lieutenant General
5179
Rep 10,555
Posts |
Try hub extenders. Turner used to sell them before it was bought by ECS. Maybe ECS sells them or another company. They are what you use when using a spacer too small to support a built in hub extender (generally considered a spacer less than 12mm). Usually with 5mm or less spacers you don’t need anything, but if combining with wheels that have steel inserts that don’t go all the way through line yours, I would recommend using them.
Last edited by pbonsalb; 10-21-2020 at 10:36 PM.. |
Appreciate
0
|
10-21-2020, 08:19 AM | #5 |
Captain
578
Rep 940
Posts |
^thanks. Couldn't find them on turner/ecs site, but found these for anyone interested.
https://store.vacmotorsports.com/mob...hub-p2191.aspx
__________________
2013 e92 M3
2011 X5 35d 2018 F80 M3 ZCP |
Appreciate
0
|
10-26-2020, 01:19 AM | #8 |
Colonel
1403
Rep 2,989
Posts |
I honestly don't think you need spacers with a setup like this. Try lowering the car and it will be perfect with some negative camber. Skip the spacers, diminishing returns and sacrifice handling for the sake of looks.
__________________
INSTAGRAM: GORDON.M3
DINAN | EVOSPORT | VAC | ARP | RD SPORT | NEEZ | EIBACH | CSF | IND | BILSTEIN | KLASSEN | BREMBO | ENDLESS | BBS | BPM SPORT | PROJECT MU | EVENTURI |
Appreciate
1
DRLane3968.00 |
10-26-2020, 06:39 AM | #9 |
Captain
578
Rep 940
Posts |
In the pic above I'm using 5mm front and 12mm rear spacers. Without spacers the wheels are way too sunk in IMO.
__________________
2013 e92 M3
2011 X5 35d 2018 F80 M3 ZCP |
Appreciate
0
|
10-26-2020, 09:23 PM | #10 |
Colonel
1403
Rep 2,989
Posts |
The problem is stock ride height, who knows revisit with spacers after you lower the car and you might not need the spacers anymore.
__________________
INSTAGRAM: GORDON.M3
DINAN | EVOSPORT | VAC | ARP | RD SPORT | NEEZ | EIBACH | CSF | IND | BILSTEIN | KLASSEN | BREMBO | ENDLESS | BBS | BPM SPORT | PROJECT MU | EVENTURI |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|