Evolve E9X M3 Supercharger System

[M3_WC]

Originally Posted by aus

Anyone know anything about the Rotrex blower? Didn't AA have some issues with them?

RUF and Novitec Rosso use Rotrex superchargers, very high end kits.

Also Rotrex superchargers are used in the Koenigsegg CCX and CCXR.

[Bob MG]

Nice well done guys

[akh23456]

Originally Posted by aus

Anyone know anything about the Rotrex blower? Didn't AA have some issues with them?

i am not sure honestly about the Rotrex blower but AA uses HKS.

[pbonsalb]

AA continues to use the Rotrex blowers for some of its kits.

[Verify]

Tried looking at some flow maps and it seems the rotrex is better designed for high rpm cars

[tma1c]

that is one sweet looking plenum!

[WolfeS2K]

subscribed

Very Interested

[GOVCO]

Quick, I need people with the following superchargers to please unbolt their system and send it to me for testing. Need to make an informed decision before moving forward. I promise to give them back...mwahhahahaha

[no particular order]:

1. ESS
2. VF
3. AA
4. Gintani
5. G-Power
6. Evolve

I aprreciate eveyone's cooperation.

[BMW1986]

This will be interesting...

[Keik E92 M3]

Nice ! Pm me on pricing when available

[Imran@Evolve]

Originally Posted by aus

Anyone know anything about the Rotrex blower? Didn't AA have some issues with them?

Rotrex is used on the following:

Novitec Rosso Ferrari 360 Supersport 606HP (Twin C30-94)
Novitec Rosso Ferrari 430 Evoluzione 707HP (Twin C30-94)
Novitec Rosso Ferrari 430 Scuderia 747HP (C38-81)
Novitec Rosso Ferari 430 Supersport 707HP (C38-81)

Koenigsegg CCX 806HP C38-81
Koenigsegg CCXR 1018HP C38-81
Koenigsegg CCXR Trevita 1018 HP C38-81

RUF Porsche Boxster 430HP C38-71
RUF Porsche Carrera 2-4 445HP C38-71
RUF Porsche Carrera 2S-4S 465HP C38-71

[datbimmerdoe]

whoa, good shit! this's already a winner considerin ur track record.

[Imran@Evolve]

Originally Posted by Orange fever

I hope @ least 1 will be ready for Mfest in april 20 ?

I'm not sure this is going to happen at the moment.

[Imran@Evolve]

Originally Posted by armyav8tor

I would love to run this on VIR. Where is the filter placement for this system?

Right hand side air intake duct. After testing various locations this give the lowest air inlet temperature. The difference in IAT and therefore power between locating the filter in a shielded area behind the charger and in the air duct was quite large.

This will be further detailed when we release more data.

[Imran@Evolve]

Originally Posted by img

Hey Imran, looking good man ,Good Luck !

Thanks Izzy! Hope you are well!

[Imran@Evolve]

Originally Posted by Mike Benvo

Sweet! Can't wait to get one. Love the design of the plenum.

Originally Posted by mkPOTO

Awesome! I've been waiting for this from you Gus for a very long time

Originally Posted by j2M3

congratts

Originally Posted by dbarnes

Awesome! Great time to be a M3 owner if looking at buying a SC

Originally Posted by akh23456

looks awesome guys keep up the good work.

Originally Posted by schnell325

Very nice to see more companies entering the FI arena!!

Originally Posted by Jrollsp

I've been waiting for this too! Can't wait to see the final product!

Originally Posted by kitw

SCHWING

Originally Posted by chriszeh

damn i want it. this will be in my future im afraid. the modding never ends.

Originally Posted by shrimp_chips

Wow nice. Really excited about the Rotrex!

Originally Posted by flipm3

Yes, the OFFICIAL announcement!

Great work as always guys! I hope to have this under the hood one day!

I would love to hear more about that filtration system of yours.

Originally Posted by Bob MG

Nice well done guys

Originally Posted by tma1c

that is one sweet looking plenum!

Originally Posted by WolfeS2K

subscribed

Very Interested

Originally Posted by the infamous...

whoa, good shit! this's already a winner considerin ur track record.

Thanks guys. Appreciate the kind words. We will keep you updated.

Pricing is not determined yet.

[0-60Motorsports]

Awesome Work EVOLVE! Cant wait to see this on the market soon.

[armyav8tor]

Originally Posted by Imran@Evolve

Right hand side air intake duct. After testing various locations this give the lowest air inlet temperature. The difference in IAT and therefore power between locating the filter in a shielded area behind the charger and in the air duct was quite large.

This will be further detailed when we release more data.

Thanks for the response. I hope you guys come up with a better solution than ESS's where the filter is unprotected to the elements. I know they say water is not an issue, but I'm more worried about track debris punching a hole through the filter and getting sucked into the system.

[Sales@Evolve]

Originally Posted by GOVCO

Quick, I need people with the following superchargers to please unbolt their system and send it to me for testing. Need to make an informed decision before moving forward. I promise to give them back...mwahhahahaha

[no particular order]:

1. ESS
2. VF
3. AA
4. Gintani
5. G-Power
6. Evolve

I aprreciate eveyone's cooperation.

haha!

[Sales@Evolve]

Originally Posted by armyav8tor

Thanks for the response. I hope you guys come up with a better solution than ESS's where the filter is unprotected to the elements. I know they say water is not an issue, but I'm more worried about track debris punching a hole through the filter and getting sucked into the system.

Ours is just inside the lower air intake.

It would have to be a serious bit of debris to put a hole into an K&N type filer. They do have a metal gauze which suspends the filter material.

Water ingress is also very unlikely unless you drown the filter.

Have you ever seen this on a real race car? I would be interested to know because we are not aware of anything like this and we have a large number of race cars running some of our software and hardware running open filters subject to the elements.

[armyav8tor]

Originally Posted by Sal@Evolve

Ours is just inside the lower air intake.

It would have to be a serious bit of debris to put a hole into an K&N type filer. They do have a metal gauze which suspends the filter material.

Water ingress is also very unlikely unless you drown the filter.

Have you ever seen this on a real race car? I would be interested to know because we are not aware of anything like this and we have a large number of race cars running some of our software and hardware running open filters subject to the elements.

My concern is from my last track day at VIR where I got a ton of new paint chips on the car and a lot of them are in the vicinity of intake. I've never experienced this when I was on the Nurburgring or speeding down the autobahn. I guess the tracks around here are not as clean as the ones in Europe. I got a couple of chips that went straight though the paint and to the bare metal on the hood. I was not a happy camper but I got some trakktape for next time. I'm sure it would be a one in a million shot for the debris to hit the filter just right to puncture it, but with my luck, it would happen to me.

[THE TECH]

Awesome!