|
|
05-18-2014, 01:58 PM | #1 |
8300
19
Rep 573
Posts |
FS: Used ME20 for Brembo 365/380 E9XM3 58mm
These pads are good for 1-2 track events based on how I drive. Since I have back to back events lined up, I decided to spare myself the extra brake job and install my brand new me20 yesterday. For beginner/novice drivers, these pads can last very long. If you want to test drive the ME20 with your brembo calipers (365 or 380 kit with N caliper, ~58mm pad width), you can have them at a bargain: Make me a reasonable offer and pay USPS small box flat rate (~$20 I think) and they are yours. They are about $500 new. About the pads: New they are 18mm thick. Backing plate is 5mm thick. The pad material is about as thick as the backing plate (see attached). I love the material and use it for both front and rear brakes. I have also used it as a front only setup and it works great. So you don't really need to use them at the rear: all you get is a bit better balance. |
05-20-2014, 02:24 AM | #3 |
8300
19
Rep 573
Posts |
Thanks for the bump Readin' as fast as drivin'? The used pads that are depicted are good for 1-2 track events. Most probably more. They look almost as good as some other used brembo pads on this board that were claimed 90% left...
New ones last very very long. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|