Mporium Custom M3 Aluminum Undertray Replacement 2008-2013

Williamld · 03-24-2018, 11:57 AM

I would like to order one of these as well. How do I go about ordering one of these?

piesauce · 03-25-2018, 03:38 PM

Do you plan on designing and cutting the covers on driver and passenger side that run from basically the back of the front wheel to the front of the back wheel?

deansbimmer · 03-25-2018, 05:55 PM

Quote:

Originally Posted by piesauce

Do you plan on designing and cutting the covers on driver and passenger side that run from basically the back of the front wheel to the front of the back wheel?

No plans to make those.

Anyone wishing to buy, just PM me.

RokkM3 · 03-29-2018, 09:15 AM

Ordered, received and installed. Great under tray. Install is a lot easier than it seems at first. Took me less than an hour on jack stands. Definitely better under tray and protection than factory. Buy with confidence.

deansbimmer · 03-29-2018, 10:01 AM

Thanks for the feedback!

I updated the first post to simplify shipping. After shipping so many of these I've been able to average out shipping costs and negotiate with FedEx better rates. I now offer a lower flat rate for everyone in USA/CAN.

I have these in stock and ready to ship. Just PM me your Paypal email and I'll send an invoice you can click on to pay.

oolas3 · 03-30-2018, 01:21 PM

Just to confirm, does this kit come with the 2 small aero wing pieces at each side?

deansbimmer · 03-30-2018, 01:46 PM

Quote:

Originally Posted by oolas3

Just to confirm, does this kit come with the 2 small aero wing pieces at each side?

No. Those have never been offered. They cad files were provided in another thread for those who couldn't live without them and wanted to have them 3D printed themselves.

Those aero trims are not to be confused with the aluminum angle brackets used to attach the fender liner to the tray as shown in the CAD screen capture in this thread. Those are included with the hardware needed to install this tray.

GeorgeA · 04-02-2018, 12:57 PM

Quote:

Originally Posted by azndrunk74

sorry i don't have pics. earlier this week i had some bad luck and ruined my mode carbon gt4 lip (even the metal undertray) so i had to remove it. in doing so, the bumper fit much, much better with the undertray. most people probably won't notice, but it satisfies my OCD.

the mode gt4 lip is so strong/stiff that it didn't allow much flex of the bumper. those with smaller or flexible (cheaper ebay gt4 lips, etc.) lips should have no problems with this undertray.

So the bumper fits better with the metal under tray or OEM felt?

azndrunk74 · 04-02-2018, 01:05 PM

Quote:

Originally Posted by GeorgeA

So the bumper fits better with the metal under tray or OEM felt?

overall, i'd say the metal under tray. it's 1 solid metal piece and the areas where you drill the mounting screws will play a role in how the bumper fits to your car. i made sure the gaps between the bumper and air ducts were minimal before drilling the holes.

M3Ap1 · 04-02-2018, 01:25 PM

Very interested. Will need to purchase one in the future.

GeorgeA · 04-02-2018, 02:11 PM

Quote:

Originally Posted by azndrunk74

overall, i'd say the metal under tray. it's 1 solid metal piece and the areas where you drill the mounting screws will play a role in how the bumper fits to your car. i made sure the gaps between the bumper and air ducts were minimal before drilling the holes.

Great! Thanks for the feedback!

tlow98 · 04-03-2018, 03:46 PM

Nice piece! Always liked the aluminum tray on my E36 M3. I'll keep this in mind for when the time comes.

iverson3yoo · 04-13-2018, 07:29 PM

Product is A+. Incredibly well designed and built.

The "bad" only comes with installation IF you have a larger oil cooler or intercooler, like me have the AA sc kit. I have a much larger intercooler and piping down there which gives you less than zero clearance.

I had to do some of my own "fabricating" which meant removing the rubber and cutting down the plastic pieces with a Dremel so it was flat/flush. Lastly I had to go buy longer rear screws bc I just didn't have the shear force while lying on the ground to push the tray up. Using the longer screws as leverage I got the tray flush and replaced with the shorter screws one at a time.

To reiterate... great product!

deansbimmer · 04-14-2018, 07:49 AM

Thank you for the feedback! Now that we know the fitment issue was the gasket height on the oversize oil cooler in an AA SC setup, I can work with buyers to shorten that gasket height or omit them altogether for a more custom fitment.

tigermack · 04-16-2018, 08:11 PM

All 3 models share the same tray, correct?

deansbimmer · 04-16-2018, 08:49 PM

Yes. Fits all 2008-2013 M3 regardless of body style.

NYBulldog · 04-20-2018, 09:28 PM

Gonna need one soon

RATEDD M · 04-30-2018, 09:46 AM

In need of this. Looks great

deansbimmer · 05-03-2018, 05:12 PM

International Shipping Update!

I've negotiated killer FedEx International rates for anyone abroad wanting one of these. PM me for a shipping quote!

I have these available ready to ship.

piesauce · 05-04-2018, 02:04 PM

Quote:

Originally Posted by deansbimmer

No. Those have never been offered. They cad files were provided in another thread for those who couldn't live without them and wanted to have them 3D printed themselves.

Those aero trims are not to be confused with the aluminum angle brackets used to attach the fender liner to the tray as shown in the CAD screen capture in this thread. Those are included with the hardware needed to install this tray.

I would really like those CAD files so that I could 3D print a pair for myself. Do happen to have them or the thread that has them?

deansbimmer · 05-04-2018, 04:55 PM

Quote:

Originally Posted by piesauce

I would really like those CAD files so that I could 3D print a pair for myself. Do happen to have them or the thread that has them?

It's in the original thread, here: http://www.m3post.com/forums/showpos...&postcount=413

piesauce · 05-05-2018, 08:12 AM

Quote:

Originally Posted by deansbimmer

It's in the original thread, here: http://www.m3post.com/forums/showpos...&postcount=413

Thank you sir!

03-24-2018, 11:57 AM	#67
Williamld Second Lieutenant 20 Rep 245 Posts Drives: 01' BMW 330ci Join Date: Dec 2011 Location: Chambersburg, PA. iTrader: (1)	I would like to order one of these as well. How do I go about ordering one of these?
	Appreciate 0 Quote

03-25-2018, 03:38 PM	#68
piesauce Private First Class 61 Rep 125 Posts Drives: 2008 \| BMW M3 \| 6MT Join Date: Feb 2017 Location: SE Michigan iTrader: (0)	Do you plan on designing and cutting the covers on driver and passenger side that run from basically the back of the front wheel to the front of the back wheel? __________________ piesauce
	Appreciate 0 Quote

03-29-2018, 09:15 AM	#70
RokkM3 Private 7 Rep 65 Posts Drives: e92 m3 vt625 Join Date: Oct 2017 Location: TN iTrader: (1)	Ordered, received and installed. Great under tray. Install is a lot easier than it seems at first. Took me less than an hour on jack stands. Definitely better under tray and protection than factory. Buy with confidence.
	Appreciate 1 deansbimmer3748.50 Quote

03-29-2018, 10:01 AM	#71
deansbimmer BimmerPost Supporting Vendor 3749 Rep 2,907 Posts Drives: 2011 E93 M3 Join Date: Nov 2014 Location: DFW, Texas iTrader: (17) Garage List 1988 BMW M3 [0.00] 2013 BMW M3 [0.00] 2011 X5M [0.00] 2011 BMW M3 [0.00]	Thanks for the feedback! I updated the first post to simplify shipping. After shipping so many of these I've been able to average out shipping costs and negotiate with FedEx better rates. I now offer a lower flat rate for everyone in USA/CAN. I have these in stock and ready to ship. Just PM me your Paypal email and I'll send an invoice you can click on to pay.
	Appreciate 0 Quote

03-30-2018, 01:21 PM	#72
oolas3 Captain 388 Rep 876 Posts Drives: BMW Join Date: May 2015 Location: United States iTrader: (0)	Just to confirm, does this kit come with the 2 small aero wing pieces at each side?
	Appreciate 0 Quote

04-02-2018, 01:25 PM	#76
M3Ap1 Sergeant 35 Rep 93 Posts Drives: E90 M3 Join Date: Jan 2014 Location: Bay Area, CA iTrader: (4)	Very interested. Will need to purchase one in the future.
	Appreciate 1 deansbimmer3748.50 Quote

04-03-2018, 03:46 PM	#78
tlow98 Brigadier General 2173 Rep 4,989 Posts Drives: 2009 E91, 2014 F15 x35i Join Date: Aug 2011 Location: Bay Area iTrader: (2)	Nice piece! Always liked the aluminum tray on my E36 M3. I'll keep this in mind for when the time comes.
	Appreciate 0 Quote

04-13-2018, 07:29 PM	#79
iverson3yoo If you ain't first you're last 65 Rep 545 Posts Drives: e90 M3 Join Date: Mar 2011 Location: Loudoun iTrader: (3) Garage List 2008 BMW M3 [0.00]	Product is A+. Incredibly well designed and built. The "bad" only comes with installation IF you have a larger oil cooler or intercooler, like me have the AA sc kit. I have a much larger intercooler and piping down there which gives you less than zero clearance. I had to do some of my own "fabricating" which meant removing the rubber and cutting down the plastic pieces with a Dremel so it was flat/flush. Lastly I had to go buy longer rear screws bc I just didn't have the shear force while lying on the ground to push the tray up. Using the longer screws as leverage I got the tray flush and replaced with the shorter screws one at a time. To reiterate... great product! Attached Images __________________
	Appreciate 1 deansbimmer3748.50 Quote

04-14-2018, 07:49 AM	#80
deansbimmer BimmerPost Supporting Vendor 3749 Rep 2,907 Posts Drives: 2011 E93 M3 Join Date: Nov 2014 Location: DFW, Texas iTrader: (17) Garage List 1988 BMW M3 [0.00] 2013 BMW M3 [0.00] 2011 X5M [0.00] 2011 BMW M3 [0.00]	Thank you for the feedback! Now that we know the fitment issue was the gasket height on the oversize oil cooler in an AA SC setup, I can work with buyers to shorten that gasket height or omit them altogether for a more custom fitment.
	Appreciate 0 Quote

04-16-2018, 08:11 PM	#81
tigermack OPN DIFF 474 Rep 1,908 Posts Drives: 10' E90 M3 6MT LB Join Date: Oct 2012 Location: Pacific Ocean iTrader: (12) Garage List 2010 M3 [0.00] 1995 BMW e36 325i [7.91] 2006 BMW e90 330i [8.34]	All 3 models share the same tray, correct?
	Appreciate 0 Quote

04-16-2018, 08:49 PM	#82
deansbimmer BimmerPost Supporting Vendor 3749 Rep 2,907 Posts Drives: 2011 E93 M3 Join Date: Nov 2014 Location: DFW, Texas iTrader: (17) Garage List 1988 BMW M3 [0.00] 2013 BMW M3 [0.00] 2011 X5M [0.00] 2011 BMW M3 [0.00]	Yes. Fits all 2008-2013 M3 regardless of body style.
	Appreciate 0 Quote

04-20-2018, 09:28 PM	#83
NYBulldog Specialist 1310 Rep 2,706 Posts Drives: Nikes Join Date: Jun 2010 Location: NuYawk iTrader: (19)	Gonna need one soon __________________
	Appreciate 0 Quote

04-30-2018, 09:46 AM	#84
RATEDD M Private 6 Rep 61 Posts Drives: 09 e90 M3 Join Date: Apr 2018 Location: Chicago IL iTrader: (1)	In need of this. Looks great
	Appreciate 0 Quote

05-03-2018, 05:12 PM	#85
deansbimmer BimmerPost Supporting Vendor 3749 Rep 2,907 Posts Drives: 2011 E93 M3 Join Date: Nov 2014 Location: DFW, Texas iTrader: (17) Garage List 1988 BMW M3 [0.00] 2013 BMW M3 [0.00] 2011 X5M [0.00] 2011 BMW M3 [0.00]	International Shipping Update! I've negotiated killer FedEx International rates for anyone abroad wanting one of these. PM me for a shipping quote! I have these available ready to ship.
	Appreciate 0 Quote