pads for Alcon Superkit

[maicol76]

I'm considering to try Alcon Superkit, but have no idea about available pads(like PAGID29)

If there is someone who has information about this kit, plz let me know.

[Richard@M-World]

Pagid RS29 is available for Alcon Superkit. Let me know if I may be of help.

See here: http://www.m3post.com/forums/showthread.php?t=669094

[maicol76]

Originally Posted by Richard@M-World

Pagid RS29 is available for Alcon Superkit. Let me know if I may be of help.

See here: http://www.m3post.com/forums/showthread.php?t=669094

Only Pagid?

[Richard@M-World]

Originally Posted by maicol76

Only Pagid?

Yes I only carry Pagid because it suits the needs of track day drivers - ultra low wear, fade resistance, low operating costs, excellent modulation...

[klammer]

I use carbotechs on mine. Not sure about others. I did like the pagids more but the carbotechs were cheaper.

[maicol76]

Originally Posted by klammer

I use carbotechs on mine. Not sure about others. I did like the pagids more but the carbotechs were cheaper.

Oh thanks, KLammer.
Which Carbotechs pads are good for trackday?
Nowdays, I'm using Ferodo 2500 or 3000.

[maicol76]

Originally Posted by klammer

I use carbotechs on mine. Not sure about others. I did like the pagids more but the carbotechs were cheaper.

And,

I sent email

I'm using Alcon Superkit for BMW E92 M3, and love EBC pads so much.
Are there available pads for this BBK?
If not, I hope to suggest that EBC produce pads(yellow, blue and orange) for this famous BBK.

I received reply from EBC.

Hi,
Can you let us have a pad outline drawing please? We will need to know the overall length and height of the metal back plate. We should then be able to identify it for you.

Best regards

Bob Sketchley

Automotive Technical Dept.
Freeman Automotive (UK) Limited
Tel: 01604 583344

Could you give me some advice and technical information about pads for superkit?

[klammer]

I use the carbotechs xp12 up front and 10's in the rear for the track. Not sure about the technical drawings. Sometimes you need to just send them a set of pads for a template, but that costs dollars, as I found with Endless.

[maicol76]

Originally Posted by klammer

I use the carbotechs xp12 up front and 10's in the rear for the track. Not sure about the technical drawings. Sometimes you need to just send them a set of pads for a template, but that costs dollars, as I found with Endless.

Could you give me an information of Carbotech pads(part NO.)?

[italyix]

Originally Posted by maicol76

Could you give me an information of Carbotech pads(part NO.)?

http://www.ctbrakes.com/calipers.asp?Make=Alcon_Calipers

[maicol76]

Originally Posted by italyix

http://www.ctbrakes.com/calipers.asp?Make=Alcon_Calipers

hey italyix

I already checked this page a few weeks ago. already.

Here is email between Carbotech and me


l'll be appreciate if you give me some advice about available Carbotech pads for superkit.


We will need more info from you on which kit you have before we can give you part numbers and prices.
Thanks-
Mike Jr.


I attached BBK drawing files that I have.


Do you have any drawings of the pads that are used in these calipers?


No.
This drwaings were downloaded from Alconusa.com.
M3post member using Alcon superkit with Carbotech pads recommended your pads instead of expensive Pagid pads.


Yes, I found the same one's using your car info.
It appears that they pads could be 1 of a couple different shapes from the pictures, but there is no guarantee that the pad pictures with the kits are the actual pads used in the kit.
It looks like the 4 piston is the CTMONO-4 shape but we cannot confirm the dimensions and the 6 piston looks to be the CTP7797, but again, we cannot confirm the dimensions.
Here is what we have on each of them:
CTMONO-4- 131mm x 62.5mm x 16mm (thick)
CTP7797- 163mm x 69.5mm x 18mm (thick)

Let me know what you can find out and we will go from there.

Thanks again!


So, I wanna Know exact part No. before order