BMW M3 Forum (E90 E92)

BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   M3Post - BMW M3 Forum > M3 Marketplace > SPONSORS Classifieds/Groupbuys/Specials Area > Wheels | Tires | Spacers
 
European Auto Source (EAS)
Post Reply
 
Thread Tools Search this Thread
      06-22-2010, 07:17 PM   #1
WheelSTO
Lieutenant
99
Rep
443
Posts

Drives: BMW
Join Date: May 2010
Location: Chicago, IL

iTrader: (0)

WSTO - SSR/// Type-F & Euro Line Up *Grand Opening Special* FREE Tire Tote!





SSR Wheels is no stranger to the aftermarket wheel industry. They have been expanding their wheel line to cater to the distinct taste of euro market, mostly towards the BMW enthusiast. We are working with SSR Wheels USA to bring you great deals, and an opportunity to run with the original Speed Star Wheel.

Here's a quick history of the brand, and company for those who aren't too aware of their presence in the European market.

Founded in 1971, SSR formally Speed Star Racing was established. SSR then released the first aluminum racing 3 piece wheel, the MK1. Aluminum wheels were in high demand at the time, and led to start of JWL (Japan Light Alloy Wheel) Certification in 1973. JWL certification involves testing impact strength and endurance strength. SSR wheels are always put through JWL testing before they are used on the street or track. In 1981, a 3rd party statutory board the VIA (Vehicle Inspection Association) was created to verify JWL testing. Both the JWL and VIA logo are embossed into each and every SSR wheel representing dedication to quality control. SSR has always focused on manufacturing precise, lightweight, and strong wheels and will continue this tradition for years to come. Over the years, SSR's racing heritage has led them to many victories and championships including the 1979 Formula Nippon race that took 1st Place, and their BMW M1 race car in 1980.
With a long line of race wheels and victories. SSR wheels represent quality, performance and strength through out their extensive race wheel line. (source SSR Wheels)

Here are the models we offer for BMW applications.


SSR Type-F [EURO]

SSR-Type F and Euro SALE!!! PM for details!!!

SSR Type-F Euro in special color - SEARCH LIGHT SILVER only.




Sizing / Offsets ~ Weight for BMW vehicles (5x120 bolt pattern) with (2) Face options, Deep Face and Flat Face (BBK clearance)


Key Features
SSR one piece wheels are lightweight and strong. SSR starts with an MHD (Magneto-Hydro Dynamics) billet piece of aluminum which is heated to a semi-solid semi-molten state. The material is then pressed in through the SSF machine at an extremely high rate creating the wheel. It is then cooled down and cleaned via air gun.

SSF manufactured faces are welded to an HTM inner barrel using SSR's innovative technology. By combining both SSF and HTM SSR wheels are light-weight and incredibly strong. The Hybrid 2 Piece wheels feature an SSF face welded to an HTM inner barrel to become one piece. This technology is exclusive only to SSR.

19 x 8 +45 (FF) - 19.1 lbs

19 x 8.5 +35 (FF) - 20.1 lbs

19 x 8.5 +22 (DF) - 19.5 lbs

19 x 9 +45 (FF) - 20.3 lbs

19 x 9.5 +28 (DF) - 20.4 lbs

19 x 10 +30 (DF) - 20.9 lbs

19 x 10 +20 (DF) - 21.5 lbs



SSR WERFEN GT-03
SSR's rendition of the Original cult classic, GT3

Available in Euro Only special color Search Light Silver as well as White, and Gunmetal



Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19", 20" sizing, widths from 8" - 12.5".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

Here are some sick photos of SSR Werfen GT-03 on E92/E60 BMW's!








SSR PROFESSOR Series - SP1 , SP3 , VF-1 , MS-1

SSR Professor SP1
The original, 5 spoke multi piece

Available in Silver, SBC (Super Black Coat) , Flat Black, Gloss Black, and White.





Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19" sizing, widths from 8" - 12.5".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

No room for words, here's a photo of SSR Professor SP1 on a E46 M3.





SSR Professor SP3

NEW Design! multi piece from SSR


Available in Silver, Matte Black, and SBC (Super Black Coat)





Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19",20" sizing, widths from 8" - 12.5".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

Detail on face, and lip. Amazing!







Here is a photo of an M3Post member with SSR Professor SP3's, looks AWESOME.




SSR Professor MS-1
Classic, Mesh multi-spoke

Available in Gray Silver, Flat Black, Gloss Black, SBC (Super Black Coat) and Gold






Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19", 20" sizing, widths from 8" - 12.5".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

SSR MS1 20x9 | 20x10.5 on E46 M3 with SBC Finish!



SSR Professor VF-1
SSR's aggressive 10 Spoke, Multi piece wheel

Available in Gray Silver, Flat Black, Gloss Black, SBC (Super Black Coat) and Gold




Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19" sizing, widths from 8" - 12.5".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.



SSR VIENNA | LM-9 Moderno Stile
SSR Euro inspired luxury mesh

Available in Titan Silver, Champagne Gold, Flat Black, and (SBC) Super Black Coat colors



Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 18" and 19", 20" sizing, widths from 8" - 13".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

Here is an E90/335i with SSR Vienna LM-9 in Flat Black 20x8.5/10




SSR VIENNA | Rosetti
SSR Euro inspired spoke line, and dish silhouette wheel

Available in Stone Silver, Silver Polish, Black Diamond cut, Black, and Super Chrome colors




Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 19", 20" sizing, widths from 8" - 13".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

Here is an Marine Green E90 M5 with SSR Vienna Rosseti in Black Diamond Cut



SSR VIENNA | Zweel
SSR Euro inspired 10 spoke, luxury wheel

Available in Stone Silver, Silver Polish, Black Diamond cut, Black, and Super Chrome colors



Sizing / Offsets for BMW vehicles (5x120 bolt pattern) with [SL] Maximum Lip, and [NR] Normal Disk for OE brakes, and BBK friendly sizing. Available in 19", 20" sizing, widths from 8" - 13".


Key Features
(HTM) Heat treatment manufacture. After the wheels go through a spinning process during manufacturing they are heat treated for a second time. This application of heat increases the strength of the wheel. As a result the wheels are lighter and stronger making them ideal for hard tuned race cars and heavier vehicles.

SSR 3 piece incorporates the latest technologies in the design and manufacturing of its lightweight 3 piece wheels. The three piece wheel is made up of an outer rim, inner rim, and center disc which allows SSR to offer wide range of offsets and ensures proper fitment specific to your vehicle. The inner rim of the wheel is heat treated for strength, using the HTM (Heat Treatment Manufacture) process which allows for the use of a thinner material to save weight. With weight and high strength in mind, each section of the wheel is engineered using separate grades and thickness of aluminum according to its purpose. SSR's racing heritage and manufacturing innovations have allowed the creation of a 3 piece wheel that is both super lightweight and high in strength.

Here is an Marine Green E90 M5 with SSR Vienna Zweel in Silver


WSTO also offers wheel and tire packages. ANY TIRE please just specify when asking for price quotes . If your not sure, just let us know and we can make some suggestions for your intended use! WSTO uses a Hunter Road Force balancer to ensure your setup is perfectly balanced. Each order includes a printout showing the accuracy.



Free Tire Tote with purchase


Please feel free to Call/Email/PM to order!


Last edited by WheelSTO; 06-22-2010 at 07:25 PM..
Appreciate 0
      06-24-2010, 09:06 AM   #2
BMWDEMON
Super modder
BMWDEMON's Avatar
United_States
104
Rep
1,973
Posts

Drives: E90 M3 & E46 M3
Join Date: May 2008
Location: Annapolis, MD

iTrader: (1)

Julius/Frank...how much for the MS1 for the E46 M3? I noticed the pics have the step lip design...is this how the wheels come?

Thanks!
__________________
SOLD - 2005 E46 M3 ZCP - I/B on black
CURRENT - 2011 E90 M3 - meticulously modified
2015 X1 Xdrive 28i
Appreciate 0
      06-24-2010, 01:18 PM   #3
WheelSTO
Lieutenant
99
Rep
443
Posts

Drives: BMW
Join Date: May 2010
Location: Chicago, IL

iTrader: (0)

Hello,

All SSR Professor MS-1 are all step lip design. They do not offer a reverse lip option.

Quote:
Originally Posted by BMWDEMON View Post
Julius/Frank...how much for the MS1 for the E46 M3? I noticed the pics have the step lip design...is this how the wheels come?

Thanks!
Appreciate 0
      07-09-2010, 05:42 PM   #4
WheelSTO
Lieutenant
99
Rep
443
Posts

Drives: BMW
Join Date: May 2010
Location: Chicago, IL

iTrader: (0)

Special Pricing for SSR Type F - Euro, and other models!

PM for great pricing!
Appreciate 0
Post Reply

Bookmarks

Tags
speed star wheel, ssr, vienna, wsto

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:33 PM.




m3post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST