Limp Mode With Code P0108. Any ideas?

[mikemulkern96]

Today I took the ///M for the first drive in about a month. Immediately the car was I'n limp mode, which I failed the realise. After a nice drive under 5K RPM I came back home and scanned these codes. Unfortunately so far all I've been able to come up with is the MAF sensor but I'm still unsure on that.
The car is at 70k Miles and i Believe the previous owner did the spark plugs at 35k. It's probably close to, or could even be have just passed, 1 year or 7k miles on the current oil (BMW 10W60).
Also the engine felt pretty good the whole drive. No misfires I could detect. It started up surprisingly strong this AM.

[dpaul]

Originally Posted by mikemulkern96

Today I took the ///M for the first drive in about a month. Immediately the car was I'n limp mode, which I failed the realise. After a nice drive under 5K RPM I came back home and scanned these codes. Unfortunately so far all I've been able to come up with is the MAF sensor but I'm still unsure on that.

Why are you unsure? Why do you feel unfortunate that you haven't come up with more codes? Most of us are happy to have just one.

If you've continued to drive and have not had the code repeat, then forget about it.

If the code repeats after clearing, just replace the MAP (not MAF) sensor.

[bmwlover0725]

Originally Posted by dpaul

If the code repeats after clearing, just replace the MAP (not MAF) sensor.

+1 on this.