ESS M3 Supercharger Update

sales@ESSTuning · 06-01-2010, 11:42 AM

I wanted to update everyone on our new VT2-625. This kit version has been in development for awhile and after months of testing is ready to be released. Boost on this new kit is 7.5 psi and it is designed to run on 93AKI/98RON or above quality fuel. We also require installing a high flow / catless exhaust system with this kit to maximize performance. DCT equipped vehicles will require our DCT software.

We just installed and dyno tested this kit on a bone stock E92 M3 that has a stock exhaust system. This customers car is having a catless exhaust system installed tomorrow. We have another car in for installation now that has a catless exhaust system. We will be dyno testing it today and posting up the performance results soon.

Before / After VT2-625 @ 7.5 psi
93AKI fuel, Manual transmission, Euro Spec E92 M3

klammer · 06-01-2010, 12:00 PM

Wow!!!

Nate@IND · 06-01-2010, 12:16 PM

Quote:

Originally Posted by klammer

Wow!!!

Are you next

per · 06-01-2010, 01:43 PM

I believe it is my car , the stock whp numbers where 352whp and the kit is being assembeled right now

tightie · 06-01-2010, 01:54 PM

Nice #s!

Can you post the boost log on the graph?

per · 06-01-2010, 02:45 PM

I just did get an sms 671 hp !!! sshit...
I am in oslo and can´t drive the car until thursday :-(

sales@ESSTuning · 06-01-2010, 03:54 PM

Quote:

Originally Posted by tightie

Nice #s!

Can you post the boost log on the graph?

Not sure we had boost hooked up on this car, I believe we did but I will check. I will get them on Per's car which we are testing today with the VT2-625 and catless exhaust. Catless / high flow cats on this car provide a nice bump in power

BTW tightie what's the latest on your beast ? I haven't seen any dyno or performance data posted yet.

per · 06-01-2010, 04:00 PM

here they are Runfile 1 stock runfile 4=,V2-625 stock exhaust, runfile 6= catless

tightie · 06-01-2010, 04:41 PM

Quote:

Originally Posted by Rom3n

Not sure we had boost hooked up on this car, I believe we did but I will check. I will get them on Per's car which we are testing today with the VT2-625 and catless exhaust. Catless / high flow cats on this car provide a nice bump in power

BTW tightie what's the latest on your beast ? I haven't seen any dyno or performance data posted yet.

The car is running great, I'm very happy with it, but there's still a few things to do and there are no official #'s yet, but those will be coming soon.

I hope I didn't come off wrong on the boost request, but the only two people that ever post the logs are Robert and Drew! It would be nice to see them on all the dyno charts. This way there is no speculation or conjecture from anyone.

sales@ESSTuning · 06-01-2010, 05:15 PM

Quote:

Originally Posted by per

here they are Runfile 1 stock runfile 4=,V2-625 stock exhaust, runfile 6= catless

Per

Here are your final numbers before with stock exhaust and after with the VT2-625 and catless exhaust in SAE and STD correction. I have also included the boost graph

It was nice that Gustav from M5board was able to come by today and attend our dyno sessions. It will also be a lot of fun to see how the VT2-625 performs this weekend against some other high performance cars during the M5board airfield event.

Stock E92 M3 93 AKI / 98 RON VS VT2-625 with Catless exhaust @ 7.5 psi 93 AKI / 98 RON

m33 · 06-01-2010, 09:20 PM

585whp is some juicy power , i might bite the bullet and opt for the upgrade considering i have the catless exhuast already

DLSJ5 · 06-01-2010, 09:23 PM

Quote:

Originally Posted by tightie

I hope I didn't come off wrong on the boost request, but the only two people that ever post the logs are Robert and Drew! It would be nice to see them on all the dyno charts. This way there is no speculation or conjecture from anyone.

Agreed Josh, very well said.

Roman,

Excellent #'s, awesome gains from the catless exhaust system & THANK YOU, for posting the boost graph as well.

I can't wait to see this car at Gustav's event, I know per will do us proud, best of luck on that.

I wish they had an event like that for us in the states!

per · 06-02-2010, 01:01 AM

MY daugher is going to get her driving practise soon as she is 16, and this is my only car with manual gearbox, i guess she is going to get exeptional driving skills.........

chungdae · 06-02-2010, 10:07 AM

^whoa PG is not a moderator anymore?

biglare · 06-02-2010, 11:14 PM

Quote:

Originally Posted by m33

585whp is some juicy power , i might bite the bullet and opt for the upgrade considering i have the catless exhuast already

+1 Agreed! I'm with you and need to try it out, but the gas is so bad in AZ it will be hard to keep up the octane level.

Glad to see the boost posted with the graphs as well.

Bob MG · 06-03-2010, 09:16 AM

I need a DCT flash soooooo bad!!!
I would have this in a flash, however Im not quite sure what size pulley I would need to run 7,5PSI considering I am already using a 92mm which is 7,5 at sea level, and only registering 5,8PSI

I would need a 9,5PSI pulley to make 7,4 PSI at my altitude

Do you have a 9,5PSI pulley?

Bob MG · 06-03-2010, 02:51 PM

Quote:

Originally Posted by PencilGeek

I think the 88mm or 85mm pulley would be exactly what you need.

cool now I just need DCT flash

and bigger fuel injectors, a new software tune and the 85mm pulley

oh and a way to get AJ to come out to me to do all software!!

per · 06-03-2010, 03:31 PM

I did get the final dynonumbers when i picked up the car today.
highest whp=595 or 698 crank
I will participate in the m5boardevent on Saturday, 11 cars from Russia will be there together with a lot of other cars as the only 4 wheel drive Porsche gt2 with 1000hp, the new ferrari, mm
The car is amazing tto drive, i have to do something about the exhaust it is very loud, i am afraid someone is going to get a heart attack when i pass by

per · 06-03-2010, 04:23 PM

here is the dyno..

ersin · 06-03-2010, 06:11 PM

Showoff!

Cheers.

CSMRX7 · 06-03-2010, 08:48 PM

Quote:

Originally Posted by per

here is the dyno..

Wow, I guess I will be upgrading soon...

m33 · 06-03-2010, 09:39 PM

That car has ballz of fury and so will mines very soon

06-01-2010, 11:42 AM	#903
sales@ESSTuning 390 Rep 3,149 Posts Drives: ESS M3 / M4 Join Date: May 2007 Location: AZ iTrader: (6)	I wanted to update everyone on our new VT2-625. This kit version has been in development for awhile and after months of testing is ready to be released. Boost on this new kit is 7.5 psi and it is designed to run on 93AKI/98RON or above quality fuel. We also require installing a high flow / catless exhaust system with this kit to maximize performance. DCT equipped vehicles will require our DCT software. We just installed and dyno tested this kit on a bone stock E92 M3 that has a stock exhaust system. This customers car is having a catless exhaust system installed tomorrow. We have another car in for installation now that has a catless exhaust system. We will be dyno testing it today and posting up the performance results soon. Before / After VT2-625 @ 7.5 psi 93AKI fuel, Manual transmission, Euro Spec E92 M3 Last edited by sales@ESSTuning; 06-01-2010 at 07:25 PM..
	Appreciate 0 Quote

06-01-2010, 12:00 PM	#904
klammer Brigadier General 97 Rep 3,246 Posts Drives: 11 spc gry m3 e90, 19 X5 Join Date: Jan 2010 Location: chicago iTrader: (0)	Wow!!!
	Appreciate 0 Quote

06-01-2010, 01:43 PM	#906
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	I believe it is my car , the stock whp numbers where 352whp and the kit is being assembeled right now __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-01-2010, 01:54 PM	#907
tightie JOSH SHOKRI. 522 Rep 5,881 Posts Drives: 991 GT3RS, 964, Raptor Join Date: Aug 2005 Location: los angeles, california. iTrader: (7) Garage List 2008 BMW M3 [7.90]	Nice #s! Can you post the boost log on the graph? __________________ Current: 16 991 GT3RS , 91 964 C2, 17 Raptor \| Past: 2015 991 GT3, 2015 i3,15 YMB F80 M3, 13 E92 M3 DCT, 08 E92 M3 6MT, 07 E60 M5, 02 E46 M3 Instagram: @josh_speeddistrict #SpeedDistrict @SpeedDistrict
	Appreciate 0 Quote

06-01-2010, 02:45 PM	#908
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	I just did get an sms 671 hp !!! sshit... I am in oslo and can´t drive the car until thursday :-( __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-01-2010, 04:00 PM	#910
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	here they are Runfile 1 stock runfile 4=,V2-625 stock exhaust, runfile 6= catless Attached Images __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-01-2010, 09:20 PM	#913
m33 Banned 114 Rep 2,682 Posts Drives: E92 VT650 MCB Individual Join Date: Dec 2008 Location: CT iTrader: (5)	585whp is some juicy power , i might bite the bullet and opt for the upgrade considering i have the catless exhuast already
	Appreciate 0 Quote

06-02-2010, 01:01 AM	#915
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	MY daugher is going to get her driving practise soon as she is 16, and this is my only car with manual gearbox, i guess she is going to get exeptional driving skills......... __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-02-2010, 10:07 AM	#916
chungdae The Asian Sensation 56 Rep 708 Posts Drives: 2009 Alpine White M3, S1000RR Join Date: Aug 2009 Location: Miami, FL iTrader: (2)	^whoa PG is not a moderator anymore?
	Appreciate 0 Quote

06-03-2010, 09:16 AM	#918
Bob MG Moderating 418 Rep 2,047 Posts Drives: like a muppet Join Date: Oct 2009 Location: Dubai iTrader: (0)	I need a DCT flash soooooo bad!!! I would have this in a flash, however Im not quite sure what size pulley I would need to run 7,5PSI considering I am already using a 92mm which is 7,5 at sea level, and only registering 5,8PSI I would need a 9,5PSI pulley to make 7,4 PSI at my altitude Do you have a 9,5PSI pulley?
	Appreciate 0 Quote

06-03-2010, 03:31 PM	#920
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	I did get the final dynonumbers when i picked up the car today. highest whp=595 or 698 crank I will participate in the m5boardevent on Saturday, 11 cars from Russia will be there together with a lot of other cars as the only 4 wheel drive Porsche gt2 with 1000hp, the new ferrari, mm The car is amazing tto drive, i have to do something about the exhaust it is very loud, i am afraid someone is going to get a heart attack when i pass by __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-03-2010, 04:23 PM	#921
per Lieutenant 47 Rep 507 Posts Drives: M3 E92 Join Date: Jul 2007 Location: Sweden Gothenburg iTrader: (0)	here is the dyno.. Attached Images __________________ M3 E92 ESS VT-625
	Appreciate 0 Quote

06-03-2010, 06:11 PM	#922
ersin Brigadier General 126 Rep 4,145 Posts Drives: 17 YMB F80 M3 Join Date: Mar 2008 Location: Maryland iTrader: (1)	Showoff! Cheers. __________________ 2017 F80 YMB.
	Appreciate 0 Quote

06-03-2010, 09:39 PM	#924
m33 Banned 114 Rep 2,682 Posts Drives: E92 VT650 MCB Individual Join Date: Dec 2008 Location: CT iTrader: (5)	That car has ballz of fury and so will mines very soon
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search