E36 325IS to M3 clone - need lots of parts!

[lockeed]

2 weeks ago, I went to meet someone who was selling an E36 M3 that he started restoring years ago and never quite worked one... It ended up being a 325IS! Long story.... But I decided to buy the car anyway as it's a very low miles, southern US car with zero rust and it's been in storage inside a shop for the past 17 years.

I'm looking to dress the car up as a stock M3. I might swap the 2.5 for a 3L M3 motor but I'll decide once the car is up and running. I'll need lots of parts, here's a quick list.

-M3 front bumper

-Front panel (Goes under the headlight and encompasses the grilles

-New or Mint headlights, euro M3 if poss.

-Engine cover black plastic (for 2.5L)

-Black headliner - complete (my car has sunroof)

-cruise control module, VDO 412.212 / 011 / 001

-Canadian cluster in kph if possible

-black interior carpet (new or mint) and the black carpet section that goes just under the rear seats.

-Would love to find an M3 suspension kit... otherwise, I'd like to drop the car about an inch to give it the M3 stance.

Here you go, if you can help, PM me! Thanks!