|
|
10-06-2016, 10:05 PM | #1 |
Captain
102
Rep 780
Posts |
New 3D Design Style CF front lip
Selling a new 3D Design Style CF front lip in 2x2 weave pattern. Unknown brand.
Fitment is good. I test fitted it & realized this lip is too low for my driving on top of being slammed on coiliovers. The lip only reuses the left & right OEM outer screws. The rest of the OEM screws are further back where lip would not reach to make holes and reuse the screws. I drilled & widened the holes horizontally on the outer portion of the lip so I can adjust. The OEM screws have huge washers so they will stay in place once tightened down. The middle portion of the lip will just need self tapping screws and double sided tape. Check out the pics. This is with both outer section of the lip mounted in place with OEM screws & the middle portion just held in place with 2 boxes to show how it would look once you screw down the middle. $200 pick up NYC area |
Post Reply |
Bookmarks |
|
|