Side marker install San Diego

[fherjohn]

Who can install them in sd without scratching my paint? I tried but gave up. Lol

[sdbmwcoding]

Originally Posted by fherjohn

Who can install them in sd without scratching my paint? I tried but gave up. Lol

Did you try the tape method? Put one strip above side marker, one strip below side marker, connect both ends making a handle and pull. Easiest way I've found since prying it out with a mini flat head is dangerous for paint. Also use some sticky tape!

[brettcp]

Originally Posted by sd*********

Did you try the tape method? Put one strip above side marker, one strip below side marker, connect both ends making a handle and pull. Easiest way I've found since prying it out with a mini flat head is dangerous for paint. Also use some sticky tape!

This is how I did it, very easy.

[jd501]

Originally Posted by brettcp

This is how I did it, very easy.

I had the same problem as the OP; I tried tape, I tried screwdrivers, I tried pulling really hard. Nothing even got close.

Took it to my local body shop and they did it for free (car had been in twice for insurance work recently).

[EJT86]

Get some high tack gloves from Harbor freight and pull straight back on the shallow end (not the end that’s easy to grab). Pull back enough to wedge a kite string in and pull it off

[chocstraw]

Tape method worked for me very quickly. Use one hand to hold the shipping / packing tape in place and the other to pull the loop.

[phantasticphan]

Originally Posted by fherjohn

Who can install them in sd without scratching my paint? I tried but gave up. Lol

I'm in downtown SD and can help. I installed mine 10 minutes.