What polyurethane lips fit?

[be4life182]

Most of the info I found was years old, so I want to ask if anyone has had good luck with poly lips present day and if they could point me to vendor/design that fits well enough?

I like the maxton design but don't want to wait. Typical car is low/bad roads combo so CF is of no interest for the front. Pics are great

TIA

[be4life182]

Up, one last shot. I know someone must make one or at least someone found an ebay one to work.

[Dpc2u]

Originally Posted by be4life182

Up, one last shot. I know someone must make one or at least someone found an ebay one to work.

Well, I got this one on Fleabay prepainted, but I had to strip it (paint was crap), do a lot of prep, use a heat gun to get the fitment just right, and then base-clear it. Fortunately I am able to all that myself. If I had to pay to have it done, It would not have been cost effective at all. Happy with the final results, but a lot of work to get there.

[be4life182]

Looks good, thanks for the insight. Maybe they sell it unpainted.

[HunterLee]

Originally Posted by be4life182

Looks good, thanks for the insight. Maybe they sell it unpainted.

Originally Posted by be4life182

Looks good, thanks for the insight. Maybe they sell it unpainted.

They do sell them unpainted. I can vouch for the fitment of Dpc2u car. Looks completely stock. Or at least the way the car should have looked stock. You can't tell it's an add on. I bought an unpainted fiberglass gt4 style front lip from eBay. Very slight trimming to get fitment perfect. Now I just need to paint and mount it.

[be4life182]

Thank you very much!

[Seas2699]

Originally Posted by HunterLee

They do sell them unpainted. I can vouch for the fitment of Dpc2u car. Looks completely stock. Or at least the way the car should have looked stock. You can't tell it's an add on. I bought an unpainted fiberglass gt4 style front lip from eBay. Very slight trimming to get fitment perfect. Now I just need to paint and mount it.

I like that compared to the CF lips cause I know I would destroy one where I live. Are you not worried about the fiberglass cracking or breaking like a CF lip would? Curious if this would be better than the plastic route.

[HunterLee]

Originally Posted by Seas2699

I like that compared to the CF lips cause I know I would destroy one where I live. Are you not worried about the fiberglass cracking or breaking like a CF lip would? Curious if this would be better than the plastic route.

It was inexpensive enough that I wasn't too concerned with breaking it if I happen to do so. I'd be a lot less upset breaking a cheap fiberglass lip vs an expensive CF one. However I know the urethane lip would be more durable, just didn't find the style I liked especially when it came to price point.

[Seas2699]

Does anyone have any experience with the KBD poly lip? I know octane motorsports sells them. The idea was to wrap a poly lip in carbon vinyl so you get the look of carbon (kinda) but with the added strength of poly.