2.25ID rear lower spring pad

wahwill · 11-28-2022, 02:51 PM

I’m swapping out my stock rear springs with 2.25ID springs and will be using the ground control articulating adjusters which sit on top of the spring. How about the bottom though? Do I reuse the stock bottom spring pad?

Bimmerworld customer service suggested I reuse the stock pad but I’m reading posts on forums where people use no pad at all.

//steve\\ · 11-29-2022, 06:35 AM

When I ran my MCS setup I had no spring pad at all. Never had an issue. Of all the spring sizes too 2.25" ID will need something the least.

11-28-2022, 02:51 PM	#1
wahwill Private First Class 27 Rep 146 Posts Drives: E92 M3 Join Date: May 2016 Location: California iTrader: (2)	2.25ID rear lower spring pad I’m swapping out my stock rear springs with 2.25ID springs and will be using the ground control articulating adjusters which sit on top of the spring. How about the bottom though? Do I reuse the stock bottom spring pad? Bimmerworld customer service suggested I reuse the stock pad but I’m reading posts on forums where people use no pad at all.
	Appreciate 0 Tweet Quote

11-29-2022, 06:35 AM	#2
//steve\\ Major $//steve\\'s Avatar$ 1074 Rep 1,027 Posts Drives: 2012 E92 M3 Join Date: May 2012 Location: Atlanta, GA iTrader: (2)	When I ran my MCS setup I had no spring pad at all. Never had an issue. Of all the spring sizes too 2.25" ID will need something the least. __________________ Steve::::2012 AW E92::::IG - @sjs0433
	Appreciate 0 Quote