FS: Turner Camber Plates (Never Used)

[Icecreamfoo]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

A set of Turner race camber plates for E9x M3s, has caster adjustability. Was going to be part of my front suspension overhaul, but turned out I didn't need new camber plates; these were never installed.

This set was ordered with spacers that fit 14mm shock pins, with spring hats for 2.5 inch ID springs. Turner sells a variety of other spring hat versions at modest prices that'll fit different spring and shock pin sizes.

Around Anaheim Hills 92807, $300 local pick up, can ship at buyer's expense. Please drop pm if interested

Here is link to what I believe is the configuration of my kit; Turner's description states compatibility with springs having 60mm/2.25"/2.5" internal diameter
https://www.turnermotorsport.com/p-3...-race/?pdk=ASE

[ashutoshkotha]

Sent a PM

[Icecreamfoo]

bbbump

[Icecreamfoo]

https://www.turnermotorsport.com/p-3...-race/?pdk=ASE

This is link to Turner's product page that I believe represents the configuration of my camber kits.

A variety of spring hats/pin sleeve combos are also shown in the page. However Turner's description states spring compatibility is to 60mm, 2.25" or 2.5" internal diameter, so unfortunately won't work for folks with stock or stock-like front springs IDs.

[TboneS54]

*2.25" or 2.5" Nice plates, glws!

[Icecreamfoo]

Originally Posted by TboneS54

*2.25" or 2.5" Nice plates, glws!

much appreciated

[Icecreamfoo]

bump

[bgexpress]

Any idea if these would work with swift spec r springs?

[M3MATT]

What size if stock size ID?

[Icecreamfoo]

Originally Posted by bgexpress

Any idea if these would work with swift spec r springs?

Hii, i've no idea. Did you check with swift usa on the measurement?

[mcsahib]

still available?