will i be able to lower my car

monterey · 12-29-2018, 09:05 PM

I have square 19x10 +20 on 275/30/19 I feel the fronts poke out and i think i will get fender damage if i drop the car. anyone with these specs?

1MOREMOD · 12-29-2018, 09:20 PM

Try it, reshaped fender naturally.

shimmy23 · 12-29-2018, 10:01 PM

You can add camber

roastbeef · 12-29-2018, 10:12 PM

you can probably get away with a little bit, but its going to be close enough that it is going to depend on how much camber you run and what brand/model of tire.

SAMM3Y · 12-29-2018, 11:48 PM

Yes, might need coil overs cuz that's my only reference but my car is lowered on same tire size it worked on stock camber too..

SonnyJack · 12-30-2018, 04:13 PM

Quote:

Originally Posted by monterey

I have square 19x10 +20 on 275/30/19 I feel the fronts poke out and i think i will get fender damage if i drop the car. anyone with these specs?

I ran 19x9.5F +20 on 275/30/19 with no problem (not your exact wheel size I know). First I did this with H&R sport springs and then with KWv3 coilovers. No rubbing in either case.

HeavyArmZ · 12-31-2018, 12:22 PM

I currently have 19x10 +25 with 12mm spacers, 275/30/19 Hankook in front. No rubbing with Dinan springs.

6ixSpd · 01-01-2019, 11:03 AM

Zero issues. You're forgetting that when you lower it, the geometry changes to camber in a little bit more as well, giving you the clearance needed.

monterey · 01-02-2019, 12:48 AM

Quote:

Originally Posted by HeavyArmZ

I currently have 19x10 +25 with 12mm spacers, 275/30/19 Hankook in front. No rubbing with Dinan springs.

are you running camber plates? any oics?

Gfunk720 · 01-14-2019, 05:57 PM

You're fine. I'm running the same size on a 19x10 +15/f +10/r and it doesn't even rub. Front or back.

I'm lowered, but not slammed.

Iyzmi · 01-15-2019, 08:44 AM

19x10 +20 F14 with 275/30/19 on Eibach springs is a very common setup that shouldn't rub. Check out the mod bargains F14 page and you'll find plenty of pics.

12-29-2018, 09:05 PM	#1
monterey Major 339 Rep 1,239 Posts Drives: 2008 M3 Join Date: Mar 2016 Location: United States iTrader: (1)	will i be able to lower my car I have square 19x10 +20 on 275/30/19 I feel the fronts poke out and i think i will get fender damage if i drop the car. anyone with these specs? __________________ A job is nothing but work.
	Appreciate 0 Tweet Quote

12-29-2018, 09:20 PM	#2
1MOREMOD - 11817 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Try it, reshaped fender naturally.
	Appreciate 0 Quote

12-29-2018, 10:01 PM	#3
shimmy23 F15 daddymobile 2349 Rep 3,510 Posts Drives: GS X5 Join Date: Aug 2011 Location: WA iTrader: (3)	You can add camber __________________ -brandon F15 Glacier Silver journal
	Appreciate 1 IanMan384.00 Quote

12-29-2018, 10:12 PM	#4
roastbeef Lieutenant General 11585 Rep 12,724 Posts Drives: E92 M3 Join Date: Nov 2010 Location: Orange County, CA iTrader: (4)	you can probably get away with a little bit, but its going to be close enough that it is going to depend on how much camber you run and what brand/model of tire. __________________ Instagram; @roastbeefmike
	Appreciate 0 Quote

12-29-2018, 11:48 PM	#5
SAMM3Y Colonel 3085 Rep 2,747 Posts Drives: 2008 m3 Join Date: Feb 2018 Location: NorCal iTrader: (2)	Yes, might need coil overs cuz that's my only reference but my car is lowered on same tire size it worked on stock camber too.. __________________ 9ers
	Appreciate 0 Quote

12-31-2018, 12:22 PM	#7
HeavyArmZ Enlisted Member 8 Rep 38 Posts Drives: E92 M3 Join Date: Jun 2018 Location: Bay Area iTrader: (0)	I currently have 19x10 +25 with 12mm spacers, 275/30/19 Hankook in front. No rubbing with Dinan springs.
	Appreciate 0 Quote

01-01-2019, 11:03 AM	#8
6ixSpd Save the manuals! 6015 Rep 6,745 Posts Drives: '16 M3, '23 718 Spyder Join Date: Feb 2016 Location: 416 iTrader: (4)	Zero issues. You're forgetting that when you lower it, the geometry changes to camber in a little bit more as well, giving you the clearance needed. __________________ '16 M3 \| '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc
	Appreciate 0 Quote

01-14-2019, 05:57 PM	#10
Gfunk720 Second Lieutenant 13 Rep 227 Posts Drives: E92 M3- AW Join Date: Jan 2012 Location: Redding, CT iTrader: (2) Garage List 2008 BMW E92 M3 [0.00]	You're fine. I'm running the same size on a 19x10 +15/f +10/r and it doesn't even rub. Front or back. I'm lowered, but not slammed.
	Appreciate 0 Quote

01-15-2019, 08:44 AM	#11
Iyzmi Lieutenant Colonel 802 Rep 1,566 Posts Drives: E92 M3 6MT ESS625 Join Date: Sep 2014 Location: Midwest iTrader: (1)	19x10 +20 F14 with 275/30/19 on Eibach springs is a very common setup that shouldn't rub. Check out the mod bargains F14 page and you'll find plenty of pics. __________________
	Appreciate 0 Quote