|
|
07-30-2019, 11:04 AM | #1 |
First Lieutenant
556
Rep 358
Posts |
Passenger seat does not Recline
I have a strange issue; my passenger seat will not recline (forward or back). When you push the button you can hear a faint "click" but no action. All other functions work just fine.
I took the seat out and manually powered the motor for the recline function, and low and behold it worked. So it's not the mechanisms. I am thinking it is either the button itself (unlikely) or the ecu underneath the seat. Anyone else had similar issues? |
07-30-2019, 10:52 PM | #3 |
First Lieutenant
556
Rep 358
Posts |
Thanks, I tested the motor by powering it directly and it worked. So I know it is not the motor. At this point I now suspect the switch control and have since ordered one. I'll post an update once I swap it out.
|
Appreciate
0
|
08-26-2019, 05:10 PM | #4 |
First Lieutenant
556
Rep 358
Posts |
For any future readers of this post let me save you $$ and so you don't blindly buy parts like I did. The issue turned out to be a bad control module underneath the seat. If you hear clicking and something doesn't move, that is likely your culprit. After replacing mine, giving it a sec to sync to the car (no coding needed) my seat reclined. I took the old module apart hoping to find a broken solder but it all looked good, so I am guessing one of the relays went bad or is stuck.
Sigh*. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|