Name off some aftermarket wheels!

M3Dimi · 08-24-2016, 09:01 PM

Ok so I know I've been starting a bunch of threads but anyway... Aight this is the last one hopefully regarding wheels I want something that doesn't cost an arm and a leg 500 per wheel tops but I'll look at stuff that is cheaper so... Could you guys post any brands that you think are reliable that I should check out I don't know of many I'm relatively new to the car scene and want to research but I don't know what's good and what isn't or what to look for by name so that's why I ask here. So let me know thanks!

PS: I know about AG, Apex, and SSR. What else is there that you guys have run or are currently on?

Amirsm3 · 08-24-2016, 09:54 PM

Quote:

Originally Posted by M3Dimi

Ok so I know I've been starting a bunch of threads but anyway... Aight this is the last one hopefully regarding wheels I want something that doesn't cost an arm and a leg 500 per wheel tops but I'll look at stuff that is cheaper so... Could you guys post any brands that you think are reliable that I should check out I don't know of many I'm relatively new to the car scene and want to research but I don't know what's good and what isn't or what to look for by name so that's why I ask here. So let me know thanks!

PS: I know about AG, Apex, and SSR. What else is there that you guys have run or are currently on?

Check out Rota, XXR and Savini 10/10 bro

1MOREMOD · 08-24-2016, 10:46 PM

Volk, bbs

///MPower15 · 08-25-2016, 12:17 AM

You don't want to spend more than $500 per wheel, but are willing to finance a $6k IPE exhaust?

Amirsm3 · 08-25-2016, 01:15 AM

Quote:

Originally Posted by 1MOREMOD

Volk, bbs

bruh, too steep, bruh.

pooyab · 08-25-2016, 03:13 AM

I don't think even the Forgestar F14 are $500/wheel and those are lower end lol. And if your go into BBS and HRE territory it's more like $2k/wheel.

Best bet might be picking up a used set of ZCP wheels, they are one of the best looking sets for this car anyways.

M3Dimi · 08-25-2016, 03:19 AM

Quote:

Originally Posted by ///MPower15

You don't want to spend more than $500 per wheel, but are willing to finance a $6k IPE exhaust?

Why would I spend like 3k-4K on wheels that will eventually get fucked up scraped or curb rash in the future and then I'll be pissed off and want to replace them and have to drop way more the exhaust on the other hand a lot harder to damage. Plus it's way more worth it lmao...

PS: I don't know why your wasting your time responding with some shit like that I'm simply asking a question and you are coming in here and posting useless responses...

M3Dimi · 08-25-2016, 03:20 AM

Quote:

Originally Posted by pooyab

I don't think even the Forgestar F14 are $500/wheel and those are lower end lol. And if your go into BBS and HRE territory it's more like $2k/wheel.

Best bet might be picking up a used set of ZCP wheels, they are one of the best looking sets for this car anyways.

Yea I want that style but I want to go wider that's the only reason I'm not getting them.

1MOREMOD · 08-25-2016, 08:07 AM

Spend money on the wheels unless it's a Starbucks hard parker then doesn't matter save money on wheels so have enough for wing with 3 foot tall stands and set to 45 degree angle of attack so you look super fast!

Move Over · 08-25-2016, 08:36 AM

What do you plan on using the car for? Track? DD? Both?

I'm an Apex fan boy. Incredible value for what you get.

MikeeM3 · 08-25-2016, 09:09 AM

If you like the ZCP look you might want to check VMR VB3 wheels they comes in 11" rear i think and are like 250-300/wheel !!

BimmerRookie · 08-25-2016, 09:33 AM

Quote:

Originally Posted by Move Over

What do you plan on using the car for? Track? DD? Both?

I'm an Apex fan boy. Incredible value for what you get.

I agree. I love Apex wheels. I don't track or even autox (I can't because I own a cavalier z24 E93 M2.99999). They're light(er) and very good bang for your buck.

I'm also even considering refinishing OEM 220Ms, mine have a considerable amount of curb rash from the PO. Clean 220Ms look so good!

BimmerRookie · 08-25-2016, 09:35 AM

OP: check out 360 forged lol

Amirsm3 · 08-25-2016, 10:59 AM

Wheels only get curb rash if you're a shitty driver. Mistakes happen (I nicked one of my older Volk sets), but make the investment and just be more mindful.

M3Dimi · 08-25-2016, 11:01 AM

Quote:

Originally Posted by Amirsm3

Wheels only get curb rash if you're a shitty driver. Mistakes happen (I nicked one of my older Volk sets), but make the investment and just be more mindful.

I will eventually but for right now I want something different I'm really tired of the oem 220Ms and I've never curb rashes wheels in my life that was just an example.

M3Dimi · 08-25-2016, 11:03 AM

Quote:

Originally Posted by MikeeM3

If you like the ZCP look you might want to check VMR VB3 wheels they comes in 11" rear i think and are like 250-300/wheel !!

I've heard of them but don't know what the opinion is on them how are they? Durable?

M3Dimi · 08-25-2016, 11:04 AM

Quote:

Originally Posted by Move Over

What do you plan on using the car for? Track? DD? Both?

I'm an Apex fan boy. Incredible value for what you get.

Yea I would've gone apex but they don't offer them in black and if I paint the wheels the warranty is taken off... So I can't get them... Sadly

Amirsm3 · 08-25-2016, 11:05 AM

Quote:

Originally Posted by M3Dimi

I will eventually but for right now I want something different I'm really tired of the oem 220Ms and I've never curb rashes wheels in my life that was just an example.

The possibilities are literally endless if you include wheels from the used section.

M3Dimi · 08-25-2016, 11:07 AM

Quote:

Originally Posted by Amirsm3

Quote:

Originally Posted by M3Dimi

I will eventually but for right now I want something different I'm really tired of the oem 220Ms and I've never curb rashes wheels in my life that was just an example.

The possibilities are literally endless if you include wheels from the used section.

Yea I've seen some horid looking wheels that imo don't match the car at all lmao idk why ppl put those giant chrome ugly ass ghetto rims on...

Richbot · 08-25-2016, 12:27 PM

My favorite current boutique wheel manufacturers, in order of preference:

1) H3LLAD3RP
2) ADVQUS-100
3) Murcaforged

All three very exclusive, but #1 really sets itself apart with its customer service, they really go the extra derp

Richbot · 08-25-2016, 12:28 PM

Quote:

Originally Posted by Amirsm3

Wheels only get curb rash if you're a shitty driver. Mistakes happen (I nicked one of my older Volk sets), but make the investment and just be more mindful.

Hey shut up, 275 RS3's don't have much curb protection on 10" wheels ok, jeez, JUDGEMENTAL, whatevs

At least all three times I've whacked a curb with my "nice" wheels it was the same damn wheel, wheels which aren't made anymore I might add

///M Kidding · 08-25-2016, 12:36 PM

Check out vorsteiner VFF101 or 103, they are around 2k a set.

Also, Forgestar F14 is like 1600-1800 per set and Forgestar CF5V should be around 1500.

08-24-2016, 09:01 PM	#1
M3Dimi Lieutenant 179 Rep 446 Posts Drives: 2008 e92 4.6L M3 6MT Join Date: Feb 2016 Location: California iTrader: (0)	Name off some aftermarket wheels! Ok so I know I've been starting a bunch of threads but anyway... Aight this is the last one hopefully regarding wheels I want something that doesn't cost an arm and a leg 500 per wheel tops but I'll look at stuff that is cheaper so... Could you guys post any brands that you think are reliable that I should check out I don't know of many I'm relatively new to the car scene and want to research but I don't know what's good and what isn't or what to look for by name so that's why I ask here. So let me know thanks! PS: I know about AG, Apex, and SSR. What else is there that you guys have run or are currently on? __________________ 2008 E92 M3 6MT
	Appreciate 0 Tweet

08-24-2016, 10:46 PM	#3
1MOREMOD - 11818 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Volk, bbs
	Appreciate 0

08-25-2016, 12:17 AM	#4
///MPower15 Major 504 Rep 1,236 Posts Drives: 2011 E92 M3 Join Date: Dec 2014 Location: Bay Area, CA iTrader: (16)	You don't want to spend more than $500 per wheel, but are willing to finance a $6k IPE exhaust?
	Appreciate 1 BimmerRookie469.00

08-25-2016, 03:13 AM	#6
pooyab Major 330 Rep 1,158 Posts Drives: 2011 BMW M3 2020 BMW M5C Join Date: Jan 2014 Location: Bay Area, CA iTrader: (2) Garage List 2011 BMW M3 [0.00]	I don't think even the Forgestar F14 are $500/wheel and those are lower end lol. And if your go into BBS and HRE territory it's more like $2k/wheel. Best bet might be picking up a used set of ZCP wheels, they are one of the best looking sets for this car anyways. __________________ Interlagos Blue/Speed Cloth \| BayOptiks DTM Headlights \| Alpine Stage 2 \| KW Clubsport \| Resonated X-Pipe \| Eisenmann Race \| StopTech BBK \| TE37SL \| YFCM CF Driveshaft \| Hotchkis F/R Sways \| F/R Endlinks \| Turner Control Arms and Front Tension Bushings \| Powerflex Diff Bushings \| Turner Solid Subframe Bushings \| MS Underdrive Pulley and Intake \| Alpine DCT Tune \| Karbonius Intake \| Carbon Roof (TBD)
	Appreciate 0

08-25-2016, 08:07 AM	#9
1MOREMOD - 11818 Rep 23,187 Posts Drives: Race car-> Join Date: Mar 2009 Location: check your mirrors iTrader: (5)	Spend money on the wheels unless it's a Starbucks hard parker then doesn't matter save money on wheels so have enough for wing with 3 foot tall stands and set to 45 degree angle of attack so you look super fast!
	Appreciate 1 Move Over1261.00

08-25-2016, 08:36 AM	#10
Move Over Colonel 1261 Rep 2,492 Posts Drives: M3 6MT Join Date: May 2015 Location: Peninsula iTrader: (9)	What do you plan on using the car for? Track? DD? Both? I'm an Apex fan boy. Incredible value for what you get. __________________ 2010 E92 M3 DCT
	Appreciate 0

08-25-2016, 09:09 AM	#11
MikeeM3 Lieutenant Colonel 223 Rep 1,632 Posts Drives: 600whp M4 Join Date: Feb 2015 Location: Ottawa iTrader: (0)	If you like the ZCP look you might want to check VMR VB3 wheels they comes in 11" rear i think and are like 250-300/wheel !!
	Appreciate 0

08-25-2016, 09:35 AM	#13
BimmerRookie Major 469 Rep 1,320 Posts Drives: E93 Cavalier Z24 M3 Join Date: Jan 2014 Location: Austin, TX iTrader: (0)	OP: check out 360 forged lol
	Appreciate 0

08-25-2016, 10:59 AM	#14
Amirsm3 Brigadier General 514 Rep 3,482 Posts Drives: 2011 Space Grey e90 M3 Join Date: Feb 2014 Location: Williams/Flagstaff, AZ iTrader: (3)	Wheels only get curb rash if you're a shitty driver. Mistakes happen (I nicked one of my older Volk sets), but make the investment and just be more mindful. __________________ 2011 e90 M3 Space Grey DCT ZCP- eAs, BMW Performance, Agency Power, Macht Schnell, iND, Milltek, Volk, Challenge, Stoptech, Ohlins BMWCCA:518970
	Appreciate 0

08-25-2016, 12:27 PM	#20
Richbot Major General 2761 Rep 5,482 Posts Drives: Jerez Black E90 Join Date: Sep 2007 Location: STL iTrader: (5)	My favorite current boutique wheel manufacturers, in order of preference: 1) H3LLAD3RP 2) ADVQUS-100 3) Murcaforged All three very exclusive, but #1 really sets itself apart with its customer service, they really go the extra derp __________________
	Appreciate 0

08-25-2016, 12:36 PM	#22
///M Kidding Captain 94 Rep 661 Posts Drives: E92 M3 DCT Join Date: Feb 2015 Location: PA iTrader: (5)	Check out vorsteiner VFF101 or 103, they are around 2k a set. Also, Forgestar F14 is like 1600-1800 per set and Forgestar CF5V should be around 1500. __________________ 11 E92 M3 DCT \| Evlove Stage 2 Tune \| Evolve Test Pipe \| Akrapovic slip-on \| MS Stage 2 Intake \| Ohlins R/T \| Vorsteiner VFF-101 \| OSSdeisgns \| Exotics Tuning
	Appreciate 1 M3Dimi178.50