|
|
|
KEEP M3POST ALIVE BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER LINK! |
Post Reply |
|
Thread Tools | Search this Thread |
10-24-2018, 11:08 AM | #1 |
Private
19
Rep 62
Posts |
E90 255/35 and 275/35 ZCP Wheels & Spacers
Anyone have some info on what spacers to run for a flush setup with zero rubbing on PS4S’s 255/35 and 275/35 (e90 ZCP wheels)?
|
10-24-2018, 11:26 AM | #2 |
Lieutenant
229
Rep 415
Posts |
|
Appreciate
0
|
10-28-2018, 10:47 PM | #3 |
Lieutenant
193
Rep 508
Posts |
I'd recommend going with 12mm front and 10mm rear. You could run a 12mm in the rear as well, but will likely rub the rear of the liner, where the bumper meets the rear 1/4 panel.
|
Appreciate
0
|
02-26-2019, 06:45 AM | #6 | ||
Lieutenant
119
Rep 423
Posts |
Quote:
Quote:
I have BBS CH-R which are 9" ET20 up front, so identical to BMW zcp wheels with 11mm spacers. The previous owner had 255/35 and Swift springs and both front fender liners are damaged and need replacement. I now have stock zcp springs, so the front was raised by about 15mm so I am wondering if the 255/35 would still rub. I'm going to buy a set of Michelin ps4s with 275/35 for the rear 10,5" wheels so 255 in the front would definitely look the part
__________________
|
||
Appreciate
0
|
03-08-2019, 11:04 PM | #8 |
F15 daddymobile
2349
Rep 3,510
Posts |
12/10
__________________
|
Appreciate
2
osukf0964.00 Drifter2090909.50 |
Post Reply |
Bookmarks |
|
|