part number for plenum hose connector

[krudmunk]

anyone know what the OEM PN for this hose clamp is? It’s a squeeze kind. It’s in the back of the plenum. Mine the squeeze clip broke off. I think i need to replace the entire hose? Thanks

I can’t find this on realoem. I’m not sure if it is BMW 11727838504.

[spammysammich]

You have to buy the whole hose, I couldn’t figure out a way to just replace pos brittle plastic squeeze clip. That part number should be it. Look in fcpeuro

[spammysammich]

Actually check this idle control hose

[kolosy]

Originally Posted by spammysammich

You have to buy the whole hose, I couldn’t figure out a way to just replace pos brittle plastic squeeze clip. That part number should be it. Look in fcpeuro

yeah, i just went through this. ended up buying a used hose on ebay. i do think you can swap the connector off the new hose if you want, since the other end is pretty buried.

[krudmunk]

Originally Posted by spammysammich

Actually check this idle control hose

THANKS! That's it!

Originally Posted by kolosy

yeah, i just went through this. ended up buying a used hose on ebay. i do think you can swap the connector off the new hose if you want, since the other end is pretty buried.

Yeah, I'm just going to swap the connector end since it has a hose clamp on it. I don't want to make a 5 min job into a 5 job. Who knows what else could break? All the plastics are so old and brittle given the age of the car.