Rod Bearing Kit

[Prince_of_Persia]

I was speaking with a shop in Vancouver to do my Rod Bearing. They told me they will match any online price for the parts and will order them for me and will give me warranty for their work, which is appealing. I was looking for a complete kit and found this:

https://www.turnermotorsport.com/p-1...xoCKVoQAvD_BwE

Is this all I need? Do you guys recommend anything else?

[Al Bundy's Dodge]

Replace your motor mounts while you are in there.

That kit comes with OEM bearings, is that want you wanted?

[Prince_of_Persia]

Originally Posted by Al Bundy's Dodge

Replace your motor mounts while you are in there.

That kit comes with OEM bearings, is that want you wanted?

Sounds good about motor mounts.
What bearings are recommended? Also anywhere I can get better price for a better kit / parts?

[shimmy23]

good gawd man.

[panda-R]

Originally Posted by shimmy23

good gawd man.

I know right? Someone wants to do rod bearings but doesn't know why they want to do them.

[VR1]

You should do the job with extra clearance bearings to fix the issue. (BE bearings is one popular brand). Replacing factory bearings with factory bearings does not fix the tolerance issue.

https://www.bimmerworld.com/Engine/E...rings-S65.html

And the required bolting:

https://www.bimmerworld.com/Engine/E...-Bolt-Set.html

[Prince_of_Persia]

Oh sorry guys, I put the wrong link in the first post. I was like i chose the BE ones, but paste the wrong link. This was the kit i was talking about.

https://www.turnermotorsport.com/p-1...xoCKVoQAvD_BwE

[Prince_of_Persia]

Originally Posted by panda-R

I know right? Someone wants to do rod bearings but doesn't know why they want to do them.

Wrong link, my bad lol

[Prince_of_Persia]

Originally Posted by VR1

You should do the job with extra clearance bearings to fix the issue. (BE bearings is one popular brand). Replacing factory bearings with factory bearings does not fix the tolerance issue.

https://www.bimmerworld.com/Engine/E...rings-S65.html

And the required bolting:

https://www.bimmerworld.com/Engine/E...-Bolt-Set.html

Thanks!

[Al Bundy's Dodge]

Originally Posted by Prince_of_Persia

Sounds good about motor mounts.
What bearings are recommended? Also anywhere I can get better price for a better kit / parts?

Agreed with VR1…BE bearings are the gold standard. $589 is worth the few extra $$ and additional peace of mind. They are the same price everywhere.

Good luck to you!