|
|
04-30-2020, 12:20 AM | #1 |
Private First Class
12
Rep 145
Posts |
Amp question
Anyone know how to troubleshoot a bad amp ? My car have no sound but I want to make sure before I buy a replacement amp.
Will the fan on the amp suppose to be on when Ignition ON ? My fan is always off even with engine starting ? Normal or bad ? |
05-03-2020, 09:23 AM | #2 |
Save the manuals!
6015
Rep 6,745
Posts |
Do you have any sound at all? Door chimes? Seat belt chime?
If there is no audio whatsoever you have a bad amp or a break in the MOST system. The best way is to scan the car for current errors and go from there. Also check the fuse panel in the glovebox for the amp circuit. Edit: that doesn't look like the right amp our cars come with. Looks like someone replaced it with a F series amp. It doesn't even fit the bracket.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
0
|
05-04-2020, 12:07 AM | #3 | |
Private First Class
12
Rep 145
Posts |
Check all fuse and they are fine. No sound from door chimes or sear belt.
The amp does fit the bracket. All wiring harness fit perfectly. I just removed it for pictures. The car have no error just no sound anywhere. Either amp failure or speakers failure ? Anyway to test it ? Thanks Quote:
|
|
Appreciate
0
|
05-26-2020, 10:06 AM | #4 |
Lieutenant
69
Rep 460
Posts |
The fan only turns on when the amp reaches a threshold temp.
Do you have power on the large 2 pin connector? Do you see a red light from the optical connector (disconnect it to see) when you unlock your car and/or have the ignition on? |
Appreciate
0
|
05-26-2020, 03:21 PM | #6 |
Captain
362
Rep 924
Posts |
|
Appreciate
0
|
05-27-2020, 01:16 AM | #7 |
Brigadier General
3897
Rep 4,160
Posts |
If there is completely no sound, including door chimes, etc, it's almost certainly an amp fault. Speakers won't all blow at the same time.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|