|
|
10-02-2015, 10:34 AM | #1 |
Colonel
542
Rep 2,969
Posts |
Brembo GT 380mm Kit F/R - Yellow
Hey guys, FS: Brembo GT front & rear 380/380mm kit Slotted discs with yellow calipers. Condition: Used, street driven only, a few minor blemishes on a calipers from normal wear. Discs and pads remain close to new, not daily driven! Price : $5500+Ship Location: Phoenix On car: Last edited by Exclusivs; 10-05-2017 at 01:10 AM.. |
10-06-2015, 06:21 PM | #5 |
Colonel
542
Rep 2,969
Posts |
Yes they will. M3 GTS uses 380mm Brembo kit from factory and I did run my ZCP wheels with kit installed prior to getting BBS.
These allow fitment for all 19/20" wheels. Only a select few of 18" wheels that you will run into spacial issues. |
Appreciate
0
|
10-17-2015, 05:49 PM | #12 |
Colonel
542
Rep 2,969
Posts |
If anyone has a Brembo 365/45mm kit and would like to swap brackets/rotors for 380 kit (straight swap) send me a PM.
I have 380/380 but would like to switch to 365/45 so I can run a square 18" setup. |
Appreciate
0
|
10-20-2015, 09:41 AM | #13 |
Colonel
542
Rep 2,969
Posts |
Bump!
With track days approaching in the next few weeks - would be ideal for buyer to pick up before otherwise pads will most likely need replacing vs now at 95% life left. |
Appreciate
0
|
10-20-2015, 08:09 PM | #14 |
Private First Class
15
Rep 150
Posts |
Are you running 18" or 19" BBS wheels in the photos?
Do you happen to know how much lighter the Brembo brakes are than the factory setup? Just curious how much of a reduction in unsprung weight might be achieved with this brake kit. Thanks - |
Appreciate
0
|
10-20-2015, 11:12 PM | #15 | |
Colonel
542
Rep 2,969
Posts |
Quote:
Info on Brembo 380mm vs OEM : Brembo 380 x 34 front rotor -------------------------------- 24.8 lbs. OEM front rotor-------------------------------------------- 26.6 lbs. Brembo 380 x 28 rear rotor --------------------------------- 17.0 lbs. OEM rear rotor -------------------------------------------- 22.8 lbs. Brembo 6 pot front caliper -------------------------------- 13.0 lbs. OEM front caliper ------------------------------------------ 15.2 lbs. Brembo 4 pot rear caliper ---------------------------------- 9.6 lbs. OEM rear caliper ------------------------------------------ 12.1 lbs. Taken directly from this thread: http://www.m3post.com/forums/showthr...=140719&page=3 |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|