|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
07-08-2018, 08:53 AM | #1 |
Colonel
2431
Rep 2,396
Posts
Drives: G87 M2; E92M3 MT&DCT; M3 euro
Join Date: Sep 2014
Location: nyc
|
Valve cover gasket DIY: what else to replace while there?
These are the parts I'm planning to order:
11127838271 cylinder 1-4 gasket x1 11127838272 cylinder 5-8 gasket x1 11127835170 spark plug pipe x8 11157838369 oil separator gasket x2 11157838370 oil separator o-ring x2 Anything else I should be aware of while I am there?
__________________
Pass me if you can.
|
07-08-2018, 09:04 AM | #2 |
Lieutenant
127
Rep 424
Posts |
I also had all the screws replaced as they have washers integrated. They cost way too much for stupid screws tho :
__________________
|
Appreciate
0
|
07-08-2018, 02:12 PM | #3 |
Brigadier General
4451
Rep 4,010
Posts |
Maybe think of changing out spark plugs while you are there. Much easier access. Even if you don't have many miles on, new spark plugs are cheap and never a bad thing to do.
|
Appreciate
0
|
07-09-2018, 01:03 PM | #4 |
Major General
2769
Rep 5,483
Posts |
You'll need Drei Bond for the timing cover/head seam
You'll want to have a good means of cleaning up the crud left behind in the relief for the gasket on the valve cover. It will come off the head clean, but the valvecover coating will probably stick to the gaskets in places when you take it out of the cover IIRc new separators come with some new parts and might be worth just changing them. Agree on plugs
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
cover, gasket, s65, valve |
Thread Tools | Search this Thread |
|
|