|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
04-21-2021, 08:36 AM | #221 | ||
Private
15
Rep 65
Posts |
Quote:
Looks like you have one brown wire connecting both end of the motor? And a split brown from the yellow case connects to pin 2 and 3? |
||
Appreciate
0
|
04-21-2021, 08:47 AM | #222 | ||
Private
15
Rep 65
Posts |
Quote:
It looks like you are connecting the yellow wire from the motor plug to one of the ground #13 on the power connector, and the other ground #8 splits into two wires and connect pin 2 and 3 on the switch? Then purple goes to pin 1 blue goes to pin 4 and lastly red from power #8 goes to switch pin 5 |
||
Appreciate
1
Kelse921131.50 |
04-21-2021, 08:54 AM | #223 | |
Major
1132
Rep 1,366
Posts |
Quote:
__________________
#ladydriven Heavy-spec M3 // KW Clubsports // AA x-pipe // Gintani muffler // Macht-Schnell intake // Gintani tune // OMP Seats // Too Many Apex Wheels // Stoptech ST-60 // Cobalt Friction brake pads |
|
Appreciate
1
DKJUN7514.50 |
04-21-2021, 09:14 AM | #224 | ||
Private
15
Rep 65
Posts |
Quote:
I will share here if it's a success |
||
04-21-2021, 02:57 PM | #225 | |||
Private
15
Rep 65
Posts |
Quote:
|
|||
04-21-2021, 02:59 PM | #226 | ||
Private
15
Rep 65
Posts |
Quote:
|
||
Appreciate
1
Kelse921131.50 |
09-01-2021, 09:27 PM | #227 |
Major
884
Rep 1,262
Posts
Drives: 2016 M4 GTS
Join Date: Oct 2008
Location: Cumming, GA
|
This thread was a huge help in installing Recaro Proxi XL w/ BK side mounts and oem manual sliders.
__________________
2016 M4 GTS Alpine White
2021 X5M Competition Marina Bay Blue Instagram: @JustAnothaM4 |
Appreciate
3
|
09-20-2021, 09:09 PM | #229 |
Lieutenant General
11586
Rep 12,728
Posts |
looks like its a different part number.
__________________
Instagram; @roastbeefmike
|
Appreciate
0
|
09-20-2021, 10:17 PM | #230 |
Derbo Tuning
3610
Rep 3,022
Posts |
Fundamentally they bolt to the floor the same. The main difference is the seatbelt is bolted to the seat in the E90, where the E92 is bolted to the bottom of the B pillar.
__________________
IG:ruhrohz_m3
Journal: Link E9x ZCP Suspension Info: Link Track Chat Discord: https://discord.gg/VsKbTyqBVj SF Bay Area: DM For coding services |
Appreciate
3
|
09-21-2021, 12:16 AM | #231 | |
Private First Class
28
Rep 137
Posts |
Quote:
I ask because someone local has an e90 seat that is like to pick up and dissect, keep the rail and junk the rest. |
|
Appreciate
0
|
09-21-2021, 09:51 AM | #232 | ||
Derbo Tuning
3610
Rep 3,022
Posts |
Quote:
__________________
IG:ruhrohz_m3
Journal: Link E9x ZCP Suspension Info: Link Track Chat Discord: https://discord.gg/VsKbTyqBVj SF Bay Area: DM For coding services |
||
Appreciate
0
|
06-15-2022, 02:28 PM | #233 |
Private First Class
45
Rep 148
Posts |
Excellent and helpful post. Does anyone have experience comparing the BK setup vs the Macht Schnell Clubsport seat mount? I really want manual sliders but my OEM are power and no luck finding manual sliders online or local junkyards. The MS Clubsport seems like a decent all in one solution.
|
Appreciate
0
|
06-15-2022, 04:00 PM | #234 | |
@sugu.m3
48
Rep 97
Posts |
Quote:
If you're fairly tall and need the seat to be a lot lower than stock, the Macht Schnell (or other fixed bracket setups) will be able to accommodate that. With the BK brackets, I was unable to get the seats as low as I did when I had the MS mounts. Since I'm only 5' 6", the BK was a better choice for me -- not sitting off-centered, and being able to incorporate OEM rails that are so much smoother sliding forward and backward. Last edited by stevejin; 06-15-2022 at 04:20 PM.. |
|
Appreciate
2
SupraSaiyan44.50 E46PP22.00 |
06-17-2022, 12:35 AM | #235 |
@sugu.m3
48
Rep 97
Posts |
Thought I'd add to the post above and share some photos of the setup that I was able to achieve with the help of this thread. I decided to go this route because my OCD couldn't take the driver seat being off-centered from the steering wheel anymore.
SEATS: Recaro Pole Position ABE (Driver and Passenger) - I was originally looking for a pair of leather Pole Positions to match the black interior but ended up with the ABEs because I didn't want to run seatbelt receptacle extenders to mount the receptacles properly. RAILS: OEM Manual Seat Rails (E90 328xi) - For over a month, I searched high and low for the BMW i3 seat tracks mentioned in Post #150 on eBay, craigslist, Car-Part, and Facebook Marketplace. - I then realized I could expand the search to include all of the manual seats from the E90 3-series. I actually found a decent number of manual seats being sold via Car-Part, so I snatched the cheapest pair at the closest junkyard. The scrappers wouldn't sell just the seat tracks alone, so I ended up taking both seats for $75. I'd say it was still a bargain. SEAT BRACKETS: Brey-Krause (R-9280 and R-9281) - My main goal was to get the driver seat lined up as close to the center of the steering wheel as possible. After an email exchange with BK, the best option was to order one of R-9280 and one of R-9281. By using one of each, I was able to align the seats closer to the center console. - I initially had a different seat bracket assembly, but no matter how many times I adjusted the mounting position I just couldn't get the driver seat to sit centered. OEM SEAT BELTS: Brey-Krause (R-9288 and R-9289) - To accommodate the OEM 3-point seat belts, I used these 2 parts from BK. WIRING/CODING: - This was pretty straightforward. Most of the plugs stayed on the original leather seats, so I left them there all intact. The only thing that plugged back into the wiring harness of the car was the seatbelt receptacle harness for each seat. - I then added +RECA, and coded out the parameters within the ABG module that were no longer in use. PHOTOS: PHOTOS: |
06-17-2022, 05:08 AM | #236 |
Second Lieutenant
350
Rep 259
Posts |
I found myself in a situation similar to stevejin . In the end what I did was find a couple of manual bmw e8x rails (since they are compatible) and together with the adapters from 55parts.de, the recaro pole position seats are centered on the steering wheel and allow them to be left quite low.
Picture of the adapters Here mounted on the rails oem of bmw e8x Mounting the oem rails with the adapters from 55parts.de on the car This image is not mine, but you can see how the seats are centered with the steering wheel Finally some images of the final result I don't know if you can see it in this last photo, but really the seat is centered on the steering wheel Regards!
__________________
Instagram: @m_rochen
Alpinemss Tuned | Tecnocraft E9X ///M3 Envy™ Intake System | MS Pulleys | Akrapovic Evolution Exhaust | Ohlins Road&track| BBK Brembo 6p Front & Brembo 4p Rear| H&R Stabilisator| Solid subframe bushings| full spherical bushings| Recaro pole position |
Appreciate
5
|
Post Reply |
Bookmarks |
|
|