|
|
06-06-2020, 10:15 AM | #1 |
Colonel
969
Rep 2,430
Posts |
I'm posting her for sale again, I had fun but it's time I finished my E36 build to compete in NASA/SCCA. I just Can't have 2 track cars so one has to go! The E92 is equipped and is a performer. I have full videos on my YouTube of on track performance. Not bogus street videos. For Reference you can Contact Autocoutoure Motoring in Fairlawn NJ and Rogue Engineering in Saddle River NJ. 2011 BMW E92 M3 DCT Competition Package (Street Legal Track car) Alpine White 38k miles Clean Title Price: $60,000 takes her with everything. I'll entertain offers. I'm not parting anything at this time. This is for someone who wants to get into track driving with safety and reliability in a full complete package. What's Done: E92 M3 Modifications/Chasis: -Alekshop Solid rear Subframe Mounts -Alekshop Solid Diff mounts -Front Monoball Bearings Modifications/Suspension: -MCS 2 way Remote Reservoir Double Adjustable Kit from Bimmerworld. -Ground Control Race Camber Plates -Helper Springs with Dividers Both Front and Rear (keeps springs seated when you jack up the) -Hyperco 900/6" Front Springs -Hyperco 1200/7" Rear Springs * Extra Springs available are no cost. -Ground Control Rear Height Adjusters -Rear Shock Mounts -Torrington Bearings on the Front Springs (No spring bind when turning the wheel) -Proper Swaybar Endlinks for these shocks -H&R sway bars front and rear -TRANSMISSION MODIFICATION: -Slon DCT Baffled Racing oil pan -CSF Transmission Cooler Modification/Brakes: -PFC BBK FRONT and Rear -SRF brake fluid -Braided stainless steel Lines -Turner 90mm stud kit - BimmerWorld carbon fiber brake cooling back plates with 3inch hoses to front Lip. Modifications/Exterior: -Seibon Carbon Fiber vented hood (vinyl wrapped white to match car) -GT4 front carbon lip -Bimmerworld Carbon fiber Canards -APR GT250 67" Wing -DOWNFORCE USA Rear carbon Diffuser -Pulled rear quarter panels 1/2" to accommodate wider wheels and tires up to 325 rear tire for street. 305 for track use -CARTEK FIA LED rain/brake light in rear bumper Modifications/Interior: * Interior is Gutted from driver back to trunk. I have all the OEM interior pieces that will come with the Sale of car.. leather seats, panels, speakers etc -oem flat bottom steering wheel -Profi XL seat X2 -Planted Seat Bracket -OEM BMW GTS Harness Bar -SCHROTH 6pt harnesses x2 -Gutted back seat/rear -RS red door Pulls Modifications/Engine -K&N cold air intake "gold foil heat wrapped" -CSF OIL, tranny, power steering and radiator coolers -macht schnell x pipe -BIMMERWORLD Magnaflow race exhaust -ESS GTS ECU TUNE -Rod bearings done at 33kmiles *OEM Spare original Trunk is included with GTS adjustable wing Modification/Wheels: 3 sets of wheels, pick one set or 2 for extra Cost. 1)Built by BBS - THE FIRST IN THE USA TO HAVE THE OPEN LUG FACE CUSTOM BUILT FOR THE E92 m3. 18x10/18x11 E88 "open lug face"........Tires 50% life left: Pirelli Trofeo R 265's upfront and 295's rear 2)BBS RIA Motorsport wheels. Rare Gold Japanese spec. 18x10.5 square with 295 Michelin Cup 2 tires. 68miles on tires....1/2 track day 3)BBS Brand new Motorsport wheels made for Trans Am racing spec Camaro's. 18x10.5 square on brand new Hoosier 285 Racing Slicks, 1 ...20 minute session on them, basically heat Cycled |
06-07-2020, 07:54 PM | #2 |
Major
1132
Rep 1,366
Posts |
Very cool car. I hope it sells for your asking price!
__________________
#ladydriven Heavy-spec M3 // KW Clubsports // AA x-pipe // Gintani muffler // Macht-Schnell intake // Gintani tune // OMP Seats // Too Many Apex Wheels // Stoptech ST-60 // Cobalt Friction brake pads |
Appreciate
1
nicksm3968.50 |
06-08-2020, 07:08 AM | #4 |
Colonel
969
Rep 2,430
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|