FS MPE v1 for e92/93

weiq0214 · 05-14-2021, 11:42 AM

Hello, I have an MPE v1 for sale. It's been off the car for a while. Thought I had it posted for sale years ago, but actually not lol.

There is a small crack developing around where it was originally fixed. However, it sounds as it should.

It also has a small blemish on one of the tips.

Asking for $500

Pics are here: https://drive.google.com/drive/folde...Tg?usp=sharing

bd700 · 08-26-2021, 04:34 PM

Sent a PM. Thx

2bits · 08-29-2021, 01:44 AM

I believe this will fit e90 but the tips stick out about .5” too far. Correct?

bugg · 09-07-2021, 01:25 PM

Quote:

Originally Posted by 2bits

I believe this will fit e90 but the tips stick out about .5” too far. Correct?

Here's what they look like. I think it's probably a bit more than just 0.5". IMO comes out looking kinda like a pre-Y2K pony car, or maybe some bosozoku vibes.

TMANN · 09-07-2021, 07:43 PM

sent a PM. Curious also if your exhaust modified, X-pipe, test pipes or other CAT deleted? Just curious if those factored into the crack developing? I have an X pipe, front CATs deleted, so know that has more risk for MPE cracking.

05-14-2021, 11:42 AM	#1
weiq0214 Private 2 Rep 59 Posts Drives: e93 M3 Join Date: May 2018 Location: Seattle iTrader: (0)	Hello, I have an MPE v1 for sale. It's been off the car for a while. Thought I had it posted for sale years ago, but actually not lol. There is a small crack developing around where it was originally fixed. However, it sounds as it should. It also has a small blemish on one of the tips. Asking for $500 Pics are here: https://drive.google.com/drive/folde...Tg?usp=sharing Last edited by weiq0214; 05-16-2021 at 02:12 PM..
	Appreciate 0 Tweet Quote

08-26-2021, 04:34 PM	#2
bd700 New Member 3 Rep 18 Posts Drives: 1999 M3, 2011 M3 Join Date: May 2012 Location: WA iTrader: (0)	Sent a PM. Thx
	Appreciate 0 Quote

08-29-2021, 01:44 AM	#3
2bits Private 18 Rep 92 Posts Drives: 09 M3 e90 Join Date: Sep 2009 Location: Seattle iTrader: (1)	I believe this will fit e90 but the tips stick out about .5” too far. Correct?
	Appreciate 0 Quote

09-07-2021, 07:43 PM	#5
TMANN Private First Class 38 Rep 119 Posts Drives: '12 M3; '95 M3; '12 X535d Join Date: Oct 2010 Location: Seattle, WA iTrader: (0)	sent a PM. Curious also if your exhaust modified, X-pipe, test pipes or other CAT deleted? Just curious if those factored into the crack developing? I have an X pipe, front CATs deleted, so know that has more risk for MPE cracking.
	Appreciate 0 Quote