wheel stud conversion

[nekbreaker]

hello boys have anyone here done stud conversion on your car with 359 wheel and spacers 15 front and 12 rear I need to do 90mm but I just want to see how far they stick out someone have any pictures thanks

[RE36TRO]

Sorry no pics but with the 75mm and 12/10 spacers they barely stick out if anything. I wouldn't expect it to look awkward if that's the concern.

[XKxRome0ox]

Originally Posted by nekbreaker

hello boys have anyone here done stud conversion on your car with 359 wheel and spacers 15 front and 12 rear I need to do 90mm but I just want to see how far they stick out someone have any pictures thanks

not exactly what you're looking for
but just wanted to give some visual aid


513m wheels
in this photo, i had 5mm spacer in front with the 18x9 wheels, ET29
the studs are 82mm


i don't have a good photo of the rear to show the studs
you can see it sticks out a little
18x10 wheel, ET40
with 12mm spacers, 82mm studs

now i have 18mm spacers in rear, no spacers in front

[Bimmer Barney]

Originally Posted by nekbreaker

hello boys have anyone here done stud conversion on your car with 359 wheel and spacers 15 front and 12 rear I need to do 90mm but I just want to see how far they stick out someone have any pictures thanks

Give me about a week and a half and I'll send you a pic. I'll have this exact setup.

[msan]

Here’s 82mm bullet nose on rears with 12 mm spacer

[nekbreaker]

Originally Posted by msan

Here’s 82mm bullet nose on rears with 12 mm spacer

ok they look good so 82 mm should be fine with my setup and thanks

[nekbreaker]

Originally Posted by Bimmer Barney

Give me about a week and a half and I'll send you a pic. I'll have this exact setup.

you getting 90mm studs I be waiting for those pictures and thanks

[nekbreaker]

Originally Posted by XKxRome0ox

not exactly what you're looking for
but just wanted to give some visual aid


513m wheels
in this photo, i had 5mm spacer in front with the 18x9 wheels, ET29
the studs are 82mm


i don't have a good photo of the rear to show the studs
you can see it sticks out a little
18x10 wheel, ET40
with 12mm spacers, 82mm studs

now i have 18mm spacers in rear, no spacers in front

they dont look bad and thanks

[nekbreaker]

update I when with 78mm and they fit just perfectly with the set up I got 15mm spacer front and 12mm on the rear

[thompsac25]

I did 78mm studs with 18mm front spacers, and 12mm rear spacers.

[nekbreaker]

Originally Posted by thompsac25

I did 78mm studs with 18mm front spacers, and 12mm rear spacers.

I got the same brand

[RabMcLab]

Quite new to this but have been looking at doing the same, I know you got 78mm studs but which thread type did you pick? is it 1.25 or 1.5 and m12 or m14 if im right in what im saying. please correct me if im wrong

Thanks!

[Robocop305]

I think for our cars is M12 1.5.

[domtam8]

i did 78mm conversion for my 15mm front and 12.5mm rear spacers