|
|
11-19-2018, 09:01 AM | #1 |
New Member
1
Rep 12
Posts |
Re-pin of EPS plug for amplifier replacement
Found solution :
Individual audio MOST connector on 2008 amplifier do not have the jumper between pin 1 & 2 the jumpers need to be jumped for a remote turn on signal (i think) to make the newer amps come on. Amp is now working for all speakers. ----------------------------------------------------------------------- I have recently purchased a replacement amp for my TOP HIFI requipped E92 M3 (2008). The original amplifier part number is 65127842019 My replacement part number is 65127843191 Theres an additional 3rd connector on the new amp which I understand is for power. I plugged it in, there was no gong sound nothing, seems like the optical link is broken as CD is not showing up. I suspect its something to do with the new amp having a separate power connector hence not getting the juice it needs. anyone have any advice on the additional pins needed and if there is any change with the existing 20pinout into the old amp? Thanks Last edited by TheGreenHell; 11-21-2018 at 01:13 PM.. Reason: Found solution |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|