Performance Wheel V2 Wiring to CAS

kel_m3 · 09-28-2016, 12:04 AM

Hey everyone,

I just tackled the install of the Performance Wheel V2 and just finished putting everything back together but the steering wheel doesn't come on! (Yes I've tried to power on with the two side buttons).

I'm a bit confused because the manual said to connect to CAS wiring at Pin 1 (Brown) and Pin 12 (Brown/Black) (30G) but on my CAS harness Pin 1 is actually red. Should I be tapping the thick brown wire instead?

Or alternatively, should I reroute the wiring to the JBE harness on the other side?

I also used Pico taps instead of the OEM taps because this is a used steering wheel so hopefully that didn't affect it either.

Would love to get this thing working

Thanks everyone.

Raek · 10-10-2016, 05:18 PM

Having the same issue, except mine wasn't used.

Also, I have DSC and ABS lights on

azndrunk74 · 10-10-2016, 07:36 PM

I installed a brand new V2 steering wheel on my buddies M3 using this DIY and I had 0 issues: http://www.m3post.com/forums/showthread.php?t=242963

nleeumd · 01-15-2017, 05:55 PM

Any solution to this issue, I have the same issue as the OP

nleeumd · 01-16-2017, 12:00 AM

Nevermind, I resolved this issue, I ended up wiring the wheel to the CAS, connecting the wires to pin 1 (red) and pin 12 (brown/black stripe) and it works fine.

speedster77 · 03-09-2022, 09:02 PM

Did the M Performance Electronic V2 Steering wheel install today and my CAS module PIN 1 wire was also red, just like mentioned in this thread. Pin 12 was brown/black.

Vedubin01 · 03-10-2022, 03:55 PM

Quote:

Originally Posted by speedster77

Did the M Performance Electronic V2 Steering wheel install today and my CAS module PIN 1 wire was also red, just like mentioned in this thread. Pin 12 was brown/black.

Did you have issues or everything came out ok? I'm about to install this myself

speedster77 · 03-22-2022, 07:08 PM

Quote:

Originally Posted by Vedubin01

Quote:

Originally Posted by speedster77

Did the M Performance Electronic V2 Steering wheel install today and my CAS module PIN 1 wire was also red, just like mentioned in this thread. Pin 12 was brown/black.

Did you have issues or everything came out ok? I'm about to install this myself

No issues once I labeled everything and followed the diy

Vedubin01 · 03-22-2022, 09:28 PM

Quote:

Originally Posted by speedster77

Quote:

Originally Posted by Vedubin01

Quote:

Originally Posted by speedster77

Did the M Performance Electronic V2 Steering wheel install today and my CAS module PIN 1 wire was also red, just like mentioned in this thread. Pin 12 was brown/black.

Did you have issues or everything came out ok? I'm about to install this myself

No issues once I labeled everything and followed the diy

Same, all is well here too! Loving the wheel!

09-28-2016, 12:04 AM	#1
kel_m3 Lieutenant 52 Rep 415 Posts Drives: M3 Join Date: Aug 2010 Location: Kelowna, BC iTrader: (8)	Performance Wheel V2 Wiring to CAS Hey everyone, I just tackled the install of the Performance Wheel V2 and just finished putting everything back together but the steering wheel doesn't come on! (Yes I've tried to power on with the two side buttons). I'm a bit confused because the manual said to connect to CAS wiring at Pin 1 (Brown) and Pin 12 (Brown/Black) (30G) but on my CAS harness Pin 1 is actually red. Should I be tapping the thick brown wire instead? Or alternatively, should I reroute the wiring to the JBE harness on the other side? I also used Pico taps instead of the OEM taps because this is a used steering wheel so hopefully that didn't affect it either. Would love to get this thing working Thanks everyone. __________________ 2008 BMW M3 6MT /// 2019 Ford Raptor 10AT /// 2017 Tesla Model X 90D ??? ///
	Appreciate 0 Tweet Quote

10-10-2016, 05:18 PM	#2
Raek Major 901 Rep 1,044 Posts Drives: 08 M3, '17 Macan GTS Join Date: Nov 2014 Location: New York iTrader: (1)	Having the same issue, except mine wasn't used. Also, I have DSC and ABS lights on __________________ I did a lot of things to it.
	Appreciate 0 Quote

10-10-2016, 07:36 PM	#3
azndrunk74 Major 612 Rep 1,326 Posts Drives: Frozen Black F10 M5 Join Date: Nov 2012 Location: Bay Area, CA iTrader: (13)	I installed a brand new V2 steering wheel on my buddies M3 using this DIY and I had 0 issues: http://www.m3post.com/forums/showthread.php?t=242963 __________________ 2014 Frozen Black F10 M5 \| Agency Power HFC Downpipes \| Custom Open Flash Stage 2 Tune \| KW HAS kit \| 3D Design Lip \| 3D Design Skirts \| 3D Design Spoiler \| IND Front & Rear Reflectors \| IND M5 Badge \| M Performance Steering Wheel \| M Performance CF Shift Knob \| Pedal Haus Pedals & Paddles \| Turner Exhaust \|
	Appreciate 0 Quote

01-15-2017, 05:55 PM	#4
nleeumd Private 24 Rep 94 Posts Drives: e92 m3, e46m3 Join Date: Oct 2009 Location: Arlington, VA iTrader: (1)	Any solution to this issue, I have the same issue as the OP
	Appreciate 0 Quote

01-16-2017, 12:00 AM	#5
nleeumd Private 24 Rep 94 Posts Drives: e92 m3, e46m3 Join Date: Oct 2009 Location: Arlington, VA iTrader: (1)	Nevermind, I resolved this issue, I ended up wiring the wheel to the CAS, connecting the wires to pin 1 (red) and pin 12 (brown/black stripe) and it works fine.
	Appreciate 0 Quote

03-09-2022, 09:02 PM	#6
speedster77 Private First Class 32 Rep 118 Posts Drives: E92 M3,E46 M3 6MT, 335d MSport Join Date: May 2012 Location: MD iTrader: (0)	Did the M Performance Electronic V2 Steering wheel install today and my CAS module PIN 1 wire was also red, just like mentioned in this thread. Pin 12 was brown/black.
	Appreciate 0 Quote