|
|
08-25-2020, 10:03 PM | #1 |
Lieutenant
397
Rep 417
Posts |
CSB Diy - What all do I need?
I’m going to tackle CSB and Guibo next week. Aside from those 2 parts what else should I grab? What bolts, nuts, gaskets, any other “while you in there” items?
I intend to document and put out a DIY, I couldn’t really find one on here although there’s lots of information about driveline related issues on here. A few good YouTubes out there. Any help or advice is appreciated. |
08-26-2020, 11:04 AM | #2 |
mTekMods
2142
Rep 2,902
Posts |
exhaust donut rings, center exhaust mounts are generally ruined by 80k, the bolts which hold the ds to the guibo are to be replaced and the guibo to the trans if you remove it that way, the ds to diff bolts are to be renewed.
would be a good time to look at the trans mounts at the same time.
__________________
2011 Frozen Black/Fox Red E90 M3 650+WHP
G-Power Supercharged First DCT to Manual Conversion Worldwide KW CS, BBS RI-A, BW Headers, Snow 2.5 |
Appreciate
0
|
08-26-2020, 11:04 AM | #3 |
Private First Class
163
Rep 183
Posts
Drives: 91 M5, 98 M3, 08 M3
Join Date: May 2019
Location: Earth
|
Get new exhaust gaskets, use Genuine BMW unless you want leaks.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|