|
|
09-22-2012, 07:51 PM | #1 |
Dis Member
1
Rep 44
Posts |
No mount front plate mounting mod
We're required to have front plates here in Vancouver but I didn't like how the stock front mount looks. It's just too bulky. I also prefer the centered look compared to the off center tow hook mounted plates.
So I decided to take off the stock mount to see what I could do. Luckily the dealer used short screws to mount the actual plate leaving only 2 holes in the bumper. Lots of dirt and grime gets trapped behind that stock mount. I bought this plastic license plate holder from my local Canadian Tire. Drilled 2 holes to line up with the holes in the bumper. I reused the same mounting screws from the stock mount. Picked up a few rubber faucet washers from Home Depot to use as standoffs. Ended up with 2 washers on each side to leave a big enough gap to clear the bumper. Plate mounted with frame (old frame from previous car, need a new one). Looks a lot cleaner. From the side. You can see the gap. Let's me clean behind the plate. Anyone need a stock front plate mount in Jerez Black? |
09-23-2012, 09:00 PM | #2 |
Major General
2736
Rep 6,734
Posts
Drives: 'E46 M3 Race Car, '23 X7
Join Date: Jan 2009
Location: Wisconsin - Instagram - @slicer_m
|
Great effort and thanks for sharing! However... I don't see how that's an upgrade from the stock plate mount which contours nicely with the bumper, is color matched and fits.... I hate running a front plate too but I don't know that you got ahead with this move.
__________________
'23 X7
'04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M |
Appreciate
0
|
09-23-2012, 10:40 PM | #5 | |
Dis Member
1
Rep 44
Posts |
Quote:
2. allows me to clean the area of the bumper otherwise covered by the stock mount |
|
Appreciate
0
|
09-23-2012, 10:41 PM | #6 |
Dis Member
1
Rep 44
Posts |
|
Appreciate
0
|
09-23-2012, 11:44 PM | #7 |
Captain
58
Rep 717
Posts |
I know im just saying in case your next car has no holes on the bumper lol...Or your current car ever needs a bumper replacement.
__________________
|
Appreciate
0
|
09-24-2012, 10:08 AM | #8 |
Captain
46
Rep 637
Posts
Drives: '06S2K,'11EVO,'11Jeep,'13GL450
Join Date: Mar 2011
Location: Charlottesville, VA
|
I have the tow hook plate mount on mine and really love it. It allows you to see more of the lines of the front bumper and no drilling any holes.
__________________
'06 Honda S2000 #555 TT5
'16 Porsche GT4 |
Appreciate
0
|
09-24-2012, 10:27 AM | #9 |
BimmerPost Supporting Vendor
307
Rep 13,093
Posts
Drives: BPMsport 2012 E92 M3
Join Date: Jun 2011
Location: Kansas
iTrader: (45)
Garage List 2013 Nissan GTR [0.00]
2019 Sierra Denali ... [0.00] 1999 Nissan Silvia [0.00] 1999 Nissan Skyline ... [0.00] 1998 Toyota Supra [0.00] |
No front plate FTW!
|
Appreciate
0
|
10-06-2012, 09:57 AM | #10 |
Lieutenant
51
Rep 571
Posts
Drives: 640i Gran Coupe
Join Date: Aug 2011
Location: USA
|
My buddy in LA had a motorized front plate holder made for his 335is
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|