Fitting a Remus Sport on a E90 M3?

Damage Inc · 07-26-2011, 03:07 PM

Hi all, is there anything unique needed to fit a Remus Sport on a E90 M sedan? I've been searching, and reading that the tips need to be cut, etc.

I dont want to get into anything expensive for installation and removal. I want a straightforward install that isnt expensive. And the ability to remove and re-sell when I'm done with my M3.

Anybody have any experience with this?

Thanks!

Poppin Fresh · 07-26-2011, 03:18 PM

Far as I know, you definitely need to cut a certain part of the exhaust in order to get that perfect fit and not have it stick out too much making it look silly.

Perhaps buying connecting pipes and cutting them to accommodate the exhaust?

SV Concepts II · 07-27-2011, 03:36 PM

Quote:

Originally Posted by MojorisinM3

Hi all, is there anything unique needed to fit a Remus Sport on a E90 M sedan? I've been searching, and reading that the tips need to be cut, etc.

I dont want to get into anything expensive for installation and removal. I want a straightforward install that isnt expensive. And the ability to remove and re-sell when I'm done with my M3.

Anybody have any experience with this?

Thanks!

For the E90 M3, you would need the connecting tubes along with the REMUS sport exhaust for a full bolt-on setup. However, you will have to cut off 1.5 inches from the tips so they do not stick out, which are single wall at the base so it's easy to cut. That is the only cutting that would need to be done if you get the connecting tubes with the exhaust. I hope this helps.

mcornale · 07-27-2011, 03:45 PM

I have a remus race on my e92 had to cut the stock muffler and weld new tips on.

LateBraking · 07-27-2011, 04:13 PM

As far as a "need" basis, no, nothing special. I assume you have connecting pipes already, if not, you can get Remus ones, they make connecting pipes. It will fit with zero modification, guaranteed. I know, we put my E92 M3's Remus Race mufflers on my friend's E90 M3. However, the tips will stick out about an inch and a half, maybe about 3/4 of an inch to an inch if you have Vorsteiner diffuser. it's definitely noticeable. That's where all the "you need to re-weld the tips" comments came from: it's to correct the tip length.

Poppin Fresh · 08-08-2011, 08:57 PM

If you're still interested: http://www.m3post.com/forums/showthread.php?t=555533

Damage Inc · 08-08-2011, 09:07 PM

Thanks guys, I ended up picking up an Eisenmann Sport - straight fit with no cutting

07-26-2011, 03:07 PM	#1
Damage Inc Lieutenant Colonel 805 Rep 1,937 Posts Drives: 2017 M2 Join Date: Apr 2005 Location: Nashville iTrader: (1)	Fitting a Remus Sport on a E90 M3? Hi all, is there anything unique needed to fit a Remus Sport on a E90 M sedan? I've been searching, and reading that the tips need to be cut, etc. I dont want to get into anything expensive for installation and removal. I want a straightforward install that isnt expensive. And the ability to remove and re-sell when I'm done with my M3. Anybody have any experience with this? Thanks! __________________ Current: 17 OG M2 / R8 Performance Past Performance Cars: 01 M3, 05 M3, 06 M5, 08 M6, 08 M3, 11 M3, 13 M3, 15 M3, 911 C4S, 911 GTS, 17 M2,R8 V8, R8 RWS
	Appreciate 0 Tweet Quote

07-26-2011, 03:18 PM	#2
Poppin Fresh Colonel 86 Rep 2,148 Posts Drives: With a sunroof and front plate Join Date: May 2009 Location: Bergen County NJ iTrader: (0)	Far as I know, you definitely need to cut a certain part of the exhaust in order to get that perfect fit and not have it stick out too much making it look silly. Perhaps buying connecting pipes and cutting them to accommodate the exhaust? __________________
	Appreciate 0 Quote

07-27-2011, 03:45 PM	#4
mcornale Enlisted Member 6 Rep 40 Posts Drives: E92 ///M3 Join Date: Jun 2010 Location: Westchester Ny iTrader: (0)	I have a remus race on my e92 had to cut the stock muffler and weld new tips on.
	Appreciate 0 Quote

07-27-2011, 04:13 PM	#5
LateBraking Brigadier General 327 Rep 3,882 Posts Drives: Relatively Quick. Join Date: Sep 2008 Location: U.S.A. iTrader: (27)	As far as a "need" basis, no, nothing special. I assume you have connecting pipes already, if not, you can get Remus ones, they make connecting pipes. It will fit with zero modification, guaranteed. I know, we put my E92 M3's Remus Race mufflers on my friend's E90 M3. However, the tips will stick out about an inch and a half, maybe about 3/4 of an inch to an inch if you have Vorsteiner diffuser. it's definitely noticeable. That's where all the "you need to re-weld the tips" comments came from: it's to correct the tip length.
	Appreciate 0 Quote

08-08-2011, 08:57 PM	#6
Poppin Fresh Colonel 86 Rep 2,148 Posts Drives: With a sunroof and front plate Join Date: May 2009 Location: Bergen County NJ iTrader: (0)	If you're still interested: http://www.m3post.com/forums/showthread.php?t=555533 __________________
	Appreciate 0 Quote

08-08-2011, 09:07 PM	#7
Damage Inc Lieutenant Colonel 805 Rep 1,937 Posts Drives: 2017 M2 Join Date: Apr 2005 Location: Nashville iTrader: (1)	Thanks guys, I ended up picking up an Eisenmann Sport - straight fit with no cutting __________________ Current: 17 OG M2 / R8 Performance Past Performance Cars: 01 M3, 05 M3, 06 M5, 08 M6, 08 M3, 11 M3, 13 M3, 15 M3, 911 C4S, 911 GTS, 17 M2,R8 V8, R8 RWS
	Appreciate 0 Quote