08-13-2013, 12:37 AM | #331 |
Havin' a blast!
123
Rep 4,847
Posts |
So you're a better driver than a videographer. Looking forward to videos from future track days! Sounds like an epic weekend (Portland trip & all).
__________________
BRP 1:56 | CVR 2:01 | ACS 1:53 | WSIR 1:34
|
Appreciate
0
|
08-13-2013, 12:45 AM | #332 |
-
11815
Rep 23,187
Posts |
possibly about the same at both! i wasnt too happy mid day saturday with the oil leak issue and really shook up after my huge spin but recovered nicely and went on to have a overall fun experience.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-17-2013, 12:52 AM | #333 |
-
11815
Rep 23,187
Posts |
couple shots of some new arrivals. wanna thank joe at trinity for the st-40s and anthony at bimmerbrakes for the sr34s.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| Last edited by 1MOREMOD; 08-17-2013 at 09:48 AM.. |
Appreciate
0
|
08-17-2013, 01:01 AM | #334 |
-
11815
Rep 23,187
Posts |
few more. install this weekend most likely. rotors seem huge and also heavy. will weigh parts as they come off and go on.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-17-2013, 02:26 AM | #335 |
Captain
48
Rep 611
Posts |
|
Appreciate
0
|
08-17-2013, 08:28 AM | #336 |
-
11815
Rep 23,187
Posts |
just put the items on my pelouze scale.
weight per axle st-40 caliper - 7.5 lbs 355x32 rotor - 20 lbs sr34 pad - 2.25 total 29.75 lbs but didnt weigh mounting bracket. if memory serves ec-7 plus nt01 are at 47-48 lbs. i thought the oem rotors were a little heavier than that maybe 23ish but could be thinking of my e90. will see as taken apart.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-17-2013, 03:39 PM | #337 |
-
11815
Rep 23,187
Posts |
got one buttoned up and bled and heading to next. only real issue was cutting off the dust shield. just a pain. everything else went fine. finish the rear today then do fronts tomorrow probably. color matches the car pretty dang close. used rejex on the caliper to hopefully keep them a little cleaner.
this is with my street vmrs on so no grief over that. have ec-7s for the track.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-17-2013, 04:10 PM | #338 |
Croatian
880
Rep 3,613
Posts
Drives: PORSCHE
Join Date: Dec 2012
Location: NYC
|
Coming along very nicely! Looking forward to some laptime comparisons and impressions as you build.
__________________
NARDO GREY '18 PANAMERA TURBO
Ducati V4 S Corse (track only) Husqvarna FS450 (track only) Looking for an SUV |
Appreciate
0
|
08-17-2013, 05:41 PM | #339 |
-
11815
Rep 23,187
Posts |
stock rear rotor at minimum thickness that came off was 13 lbs so 7lbs lighter in the rear. the bracket caliper assembly came out almost identical so wash there.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-17-2013, 05:44 PM | #340 |
-
11815
Rep 23,187
Posts |
well i already have some comparison. my first day at my regular track pacific raceways i equalled my best lap ever there. at my other home track which i have less experience at so im learning the car and have now got the track dialed i ran 4 seconds faster than i have before in the e90. this car gives away a slight amount top end on the front straights, 4mph at pacific and about 6mph at the ridge i think and kills it everywhere else pretty much. no comparison really much better set up. the e90 was however on stock suspension and brakes.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-18-2013, 11:45 AM | #342 |
-
11815
Rep 23,187
Posts |
just pulled front caliper and rotor and did weights.
stock front caliper at min thickness 17 lbs front caliper and bracket 13.5 lbs so due to the weight of the bigger rear caliper i gained about 7 lbs of unsprung weight back there. no small amount but at the front i dropped 3 lbs due to lighter caliper and bracket and similar weight of rotor. im guess those numbers for rotor weight might be higher if they were new maybe a pound so overall 6 lbs up in the rear and 4 lbs down in the front. wash overall as far as total weight and the weight came off the right axle at least so better steering response.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-18-2013, 12:03 PM | #343 |
Major General
1567
Rep 8,074
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
The weight loss is neglible. The increase in handling is fantastic!
These brakes are good at stopping the car quicker but I'd try and avoid that in every corner. These brakes are awesome because you can stay on the outer limits of the traction circle between turn in and apex.
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
Appreciate
0
|
08-18-2013, 02:40 PM | #344 |
-
11815
Rep 23,187
Posts |
last one is buttoned up and all bled. just need to go out and bed them and try not to pull a derple. as with the rears the only real pain was the cutting of the dust shields. james my plan is to get to the brakes a little later and harder but not abuse. seems i have gotten into a bad habit of using the brakes improperly braking harder as i get closer to the corner rather than on them hard to start.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| Last edited by 1MOREMOD; 08-18-2013 at 08:42 PM.. |
Appreciate
0
|
08-18-2013, 08:43 PM | #345 |
-
11815
Rep 23,187
Posts |
first round of bedding was uneventful. not derple action to speak of. hard to tell how hard they stop yet because on street tires and they give up rather easily.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-18-2013, 09:26 PM | #346 |
Banned
312
Rep 8,496
Posts |
so, when you're ready to drop Magic the Gathering and join the varsity football team, you can PM him...
http://www.m3post.com/forums/showthread.php?t=878367 You: what you can have instead: Last edited by mdosu; 08-18-2013 at 09:32 PM.. |
Appreciate
0
|
08-18-2013, 09:36 PM | #347 |
-
11815
Rep 23,187
Posts |
so if i quit your gonna give me a csl airbox. im in.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-21-2013, 10:38 AM | #348 | |
***Major MammelToe
157
Rep 1,139
Posts |
Quote:
__________________
E92 M3 SG DCT - AA Filter, Verstraβe Paddles, ECS SS, MH race stud, Stoptech BBK, MR Exhaust,RE Pulley, BPM Tune,Euro bumper and GTS lip, Euro MDM & DCT, KW CS, Recaro PP, TMS Soild Diff Mounts, MRF solid subframe mounts, GTS aero, RPM track built motor.
|
|
Appreciate
0
|
08-21-2013, 10:44 AM | #349 |
-
11815
Rep 23,187
Posts |
the rear i removed the entire dust shield just outside the parking brake area and in the front it was needed to remove about a third of it where interference with the rotor clearance was an issue. on my e90 i removed them completely and it was not an issue.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-22-2013, 02:27 AM | #350 |
Havin' a blast!
123
Rep 4,847
Posts |
Nice. Joe is good peoples.
__________________
BRP 1:56 | CVR 2:01 | ACS 1:53 | WSIR 1:34
|
Appreciate
0
|
08-22-2013, 10:09 AM | #351 |
-
11815
Rep 23,187
Posts |
yep cant complain best deal i could find anyways.
__________________
02 Tiag e46 M3|6MT|GC plates|MCS c.o.|GC bars|GC race control arms|GC bushings|BW eng. & tran. mounts|subframe kit|BW race shifter|BW Jaffster|Euro header|BW exhaust|K&N c.a.i.|Epic race tune|Rouge pulleys|Seibon CF hood|CSL bumper|apr gt 250 & splitter|ST-40|XR-2|SS lines|half cage|Recaro profi|Profi 2 harness|BMWpedals|BW studs| |
Appreciate
0
|
08-22-2013, 09:37 PM | #352 |
Major General
1567
Rep 8,074
Posts
Drives: 11 E90 M3 Individual
Join Date: Mar 2006
Location: Houston, TX
|
Yup...those Stop Tech race pads are pretty damned good for the price!
__________________
2018 F30 320iX Melbourne Red
2011 E90 M3 Monte Carlo Blue 2004 E46 M3 Imola Red 2000 E36/7 Z3 Steel Blue |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|