|
|
02-08-2019, 12:23 PM | #1 |
Private
14
Rep 78
Posts |
Widebody M3 Track/Daily driver?
*Had to repost in correct topic*
After an accident I decided to go widebody with some more upgrades! All work is done by Racewerkz Engineering, body work done by Fiberglass Labs , wrapped by Coastmediafx 2012 E92 M3 DCT Mineral White wrapped in satin pearl white Dtm fiberwerkz e92 gtr race/alms wide body kit Akrapovic Evolution Exhaust Motion Control 2-way Suspension Stoptech trophy sport BBK kit Macht Schnell Intake Stage 2 Macht Schnell differential and subframe bushing Spl control arms, rear upper guide links, rear toe links, front tension arm bushings Seibon Carbon fiber hood w/ hood pins H&R sway bars vorshlags stud conversion Vorshlag camber plate CSF cooling package - triple pass radiator - power steering cooler - DCT transmission cooler - engine oil cooler Alex@alpine DCT GTS tune Dinman carbon fiber Steering wheel, rear diffuser, interior trim RaceTech Seats with SchrothRacing 5-point harness and Hans Device RaceWerkz Engineering Half Cage/ Rear seat Delete (2x)Forgeline GA3R - street 19':Hankook ventus v12 evo2 305/30zr19 - track 18' :Achillies GS328 Last edited by Terryxe92; 02-08-2019 at 12:34 PM.. |
02-08-2019, 12:32 PM | #2 |
Private
14
Rep 78
Posts |
turn 6 @weathertech raceway m3 vs red curb....
After hitting the red curb and driving back home , RaceWerkz noticed that i literally bent one side of the coilovers.... This was in September 2018, since then they were taken off the car and all sent back to Motion Control Suspension for a full rebuild
|
Appreciate
0
|
02-08-2019, 01:46 PM | #3 |
B.E.
444
Rep 761
Posts |
Always nice seeing you out there buddy
__________________
Current: 2022 TRX & 2010 GT3RS
Past: 2016 M3 Individual Grigio Telesto Pearl, Sakhir Orange/Black Full Leather w/ CF trim, 6MT, ZCP, CCB, etc... Previous: 2011 E92 M3 Melbourne Red on Black 6MT ZCP. --> now 2010 dedicated track car |
Appreciate
1
Terryxe9213.50 |
02-10-2019, 01:52 PM | #6 |
Private
14
Rep 78
Posts |
Hey Mike! The hit took out some kind of sensor that had to do with hill assist or low speed assist I think. Also my front left wheel took some damage but still works fine on track and holds pressure. Stupid me drove home on the bent coilover all the way from laguna seca but made it back safely till casey asked why i had so much camber on one side LOL
Last edited by Terryxe92; 02-10-2019 at 07:41 PM.. |
Appreciate
1
roastbeef11583.00 |
Post Reply |
Bookmarks |
|
|