▀▄ eas | AE Performance Section 3 Exhaust for e9x M3

anthony @ eas · 09-29-2010, 06:14 PM

eas is proud to now offer the AE Performance Section 3 Exhaust System for e9x M3.

AE Performance BMW M3 Section 3 Exhaust is hand crafted to be the finest available for your M3. With an all TIG welded system, T-304 Stainless Steel with brushed accents and mandrel bends throughout, this refined exhaust system is a result the highest standards of quality. This premium exhaust not only provides the M3 with a muscular exhaust tone, but also provides gains of 18 horsepower and 13 ft/lb torque.

Features
+18 Horsepower & +13 Torque
17lb Reduction in Weight Over OEM System
All new gaskets & stainless steel hardware included
Quad Hand Rolled 83mm Brushed Stainless Steel Tips
Full T-304 Stainless Steel Construction
100% TIG Welded Throughout
Laser Cut Flanges
Straight bolt on system
No Check Engine Light (CEL)

Models Supported
2008+ e9x M3 Coupe, Convertible & Sedan

AE Performance - Section 3 Exhaust System - e9x M3
http://www.europeanautosource.com/pr...oducts_id=3661

SchwarzerM3 · 09-29-2010, 08:36 PM

is this a new developed system or has it been around for some time?
How would you rate the volume compared to an Eisenmann sport or an Bastuck single can?

Thanks

Alex

tom @ eas · 09-30-2010, 11:54 AM

Quote:

Originally Posted by SchwarzerM3

is this a new developed system or has it been around for some time?
How would you rate the volume compared to an Eisenmann sport or an Bastuck single can?

Thanks

Alex

Alex,

The AE was released to the public about 3-4 months ago and has a bit louder tone than the Eisenmann Sport.

I have not heard the Baustuck in person to compare.

david @ eas · 10-13-2010, 11:23 AM

Thanks for the inquiries guys! If you have any other questions feel free to ask on this thread or just PM me!

david @ eas · 10-14-2010, 10:59 AM

Quote:

Originally Posted by rjd598

any vids u got for us???

There's a video in the first post you could take a look at

rjd598 · 10-14-2010, 03:46 PM

Quote:

Originally Posted by jurrian @ eas

There's a video in the first post you could take a look at

Can't stop watching it. Sounds like a great system

Dustin@AEp · 10-28-2010, 11:35 AM

Quote:

Originally Posted by rjd598

Can't stop watching it. Sounds like a great system

If you are ever in Orange County and would like to hear it in person, let me know!

09-29-2010, 06:14 PM	#1
anthony @ eas BimmerPost Supporting Vendor 309 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	▀▄ eas \| AE Performance Section 3 Exhaust for e9x M3 eas is proud to now offer the AE Performance Section 3 Exhaust System for e9x M3. AE Performance BMW M3 Section 3 Exhaust is hand crafted to be the finest available for your M3. With an all TIG welded system, T-304 Stainless Steel with brushed accents and mandrel bends throughout, this refined exhaust system is a result the highest standards of quality. This premium exhaust not only provides the M3 with a muscular exhaust tone, but also provides gains of 18 horsepower and 13 ft/lb torque. Features +18 Horsepower & +13 Torque 17lb Reduction in Weight Over OEM System All new gaskets & stainless steel hardware included Quad Hand Rolled 83mm Brushed Stainless Steel Tips Full T-304 Stainless Steel Construction 100% TIG Welded Throughout Laser Cut Flanges Straight bolt on system No Check Engine Light (CEL) Models Supported 2008+ e9x M3 Coupe, Convertible & Sedan AE Performance - Section 3 Exhaust System - e9x M3 http://www.europeanautosource.com/pr...oducts_id=3661
	Appreciate 0 Tweet Quote

09-29-2010, 08:36 PM	#2
SchwarzerM3 Second Lieutenant 17 Rep 225 Posts Drives: 2008 M3 E90 Join Date: Sep 2010 Location: Michigan iTrader: (4)	is this a new developed system or has it been around for some time? How would you rate the volume compared to an Eisenmann sport or an Bastuck single can? Thanks Alex
	Appreciate 0 Quote

10-13-2010, 11:23 AM	#4
david @ eas BimmerPost Supporting Vendor 257 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	Thanks for the inquiries guys! If you have any other questions feel free to ask on this thread or just PM me!
	Appreciate 0 Quote