Sponsored by The Tire Rack

[abren]

Howdy.

[ck-e92]

Originally Posted by abren

Howdy.

beautiful. what are the specs on these? I've been wanting the same pair.

.ck

[abren]

Originally Posted by ck-e92

beautiful. what are the specs on these? I've been wanting the same pair.

.ck

18x9.5 +5 (15mm spacer) and 18x10.5 +10 (12mm spacer). Might end up trying a 5mm spacer on the rear instead as it's super tight back there.

[dakarwu]

Originally Posted by abren

18x9.5 +5 (15mm spacer) and 18x10.5 +10 (12mm spacer). Might end up trying a 5mm spacer on the rear instead as it's super tight back there.

what tire size?

[flipmeraz]

TE37 + Stoptech

[abren]

Originally Posted by dakarwu

what tire size?

285/35 rear and 265/35 front NT05.

[puReturbo5]

The perfect setup. Why aren't I getting sick of these wheels yet grrrr.

Originally Posted by flipmeraz

TE37 + Stoptech

[Vursce]

[IMG][/IMG]

13 e92 m3
Te37rt
265/285 pss
Suspesnion
Tune
X pipe
Intake
Bearings and engine mounts already done by MRF only the best!
Half cage
I still neede lip a diffuser peice and profi xl seats

[dakarwu]

Does anyone know if 75mm studs are long enough for 18x10.5 +20 rears with a 10mm spacer? Will it look better with 90mm?

[Makaveli7]

Originally Posted by boostboost

Had these wheels just sitting in my garage for about a year before i finally put them on, pics at famoso raceway this past weekend with my buddies taco on te37's as well.
]

Originally Posted by nintondo_san

Finally got around to taking some photos of my E90 M3. The color is Porsche's Ultraviolet from the 991.1 GT3 RS.

Originally Posted by jeremyuhh

OG Mercury Silver
18x10.5 +22 all around
7mm spacer in the front
3mm in the rear
275/35 Front & 285/35 Rear

Guys what center caps are these? any links?

[T!m3]

.

[Dubuang]

Hey guys can you help me out with these stickers? I bought them from System Motorsports, but it seems like the volk and rays aren't cut out? I tried peeling off the clear sticker but it was lifting the volk part of it like it was just one sticker? Do you think I can peel the clear part off these stickers? I've seen true OG stickers and they don't have the clear around the rays and volk.

[turbo_joe]

Originally Posted by dakarwu

Does anyone know if 75mm studs are long enough for 18x10.5 +20 rears with a 10mm spacer? Will it look better with 90mm?

I run 75mm studs and use 15mm spacers all the time with no issues, so you will be fine with 10mm spacers.

[Senpai]

Originally Posted by Dubuang

Hey guys can you help me out with these stickers? I bought them from System Motorsports, but it seems like the volk and rays aren't cut out? I tried peeling off the clear sticker but it was lifting the volk part of it like it was just one sticker? Do you think I can peel the clear part off these stickers? I've seen true OG stickers and they don't have the clear around the rays and volk.

I'd try with an xacto knife to lift one corner and see if you can press down on the under layer of the rays sticker to see if the transfer paper will come off. By the way I was looking at te's from system motorsports as well but they only seem to be carrying FK8 type r spec 5x120 wheels so I was just curious as to what spec OG te37s you got from them!

[Dubuang]

Originally Posted by Senpai

I'd try with an xacto knife to lift one corner and see if you can press down on the under layer of the rays sticker to see if the transfer paper will come off. By the way I was looking at te's from system motorsports as well but they only seem to be carrying FK8 type r spec 5x120 wheels so I was just curious as to what spec OG te37s you got from them!

I didn't buy TE37s from them, just replacement stickers. I notified them about it on Instagram, and they said the stickers have a laminate over them and are supposed to be like this??? I have never seen OG TE37 stickers like this before. For example, the laminate goes over all the cuts of the stickers, like the one in between the R and N, the A's, the A and Y and in between the Y and S. Their explanation doesn't sound right, I have other OG TE37s from the 2000s, which is why I knew the stickers looked off right when I put them on. I wanted to ask you guys if any of you bought new stickers recently and is this a new design?

[Senpai]

Originally Posted by Dubuang

I didn't buy TE37s from them, just replacement stickers. I notified them about it on Instagram, and they said the stickers have a laminate over them and are supposed to be like this??? I have never seen OG TE37 stickers like this before. For example, the laminate goes over all the cuts of the stickers, like the one in between the R and N, the A's, the A and Y and in between the Y and S. Their explanation doesn't sound right, I have other OG TE37s from the 2000s, which is why I knew the stickers looked off right when I put them on. I wanted to ask you guys if any of you bought new stickers recently and is this a new design?

Ahh I see, I had just recently received a new set of OG te37s through evasive so I'll grab a few pictures of the stickers for comparison.

[Dubuang]

Originally Posted by Senpai

Ahh I see, I had just recently received a new set of OG te37s through evasive so I'll grab a few pictures of the stickers for comparison.

I guess from what they are saying all current production OG TE37s have these type of stickers on them now. I would not do business with them again though. They took offense to my questions and got really defensive saying I need to watch what I say... They only sell authentic volk products... And honestly, all I questioned was why they look different from my OG stickers from way back when and asked if there was a design change... Yes, very unprofessional, I got my answers though, but I'm kind of irritated by whoever's behind their computer...

[VDMTom]

Originally Posted by Dubuang

Hey guys can you help me out with these stickers? I bought them from System Motorsports, but it seems like the volk and rays aren't cut out? I tried peeling off the clear sticker but it was lifting the volk part of it like it was just one sticker? Do you think I can peel the clear part off these stickers? I've seen true OG stickers and they don't have the clear around the rays and volk.

They look right, I just looked at an TE37 OG I have and they look identical.

They are single piece sticker.

[Dubuang]

Originally Posted by VDMTom

They look right, I just looked at an TE37 OG I have and they look identical.

They are single piece sticker.

Yea, here's why I was question if there was a change in the stickers. As You can see the stickers are cut intricately. These are on my old OG TE37s from like around early 2000s

[VDMTom]

Originally Posted by Dubuang

Yea, here's why I was question if there was a change in the stickers. As You can see the stickers are cut intricately. These are on my old OG TE37s from like around early 2000s

If there were changes, they were done to make them more durable for longevity. And that is what it seems like in this case IMO.

As long as the packaging/quality looks authentic you should have no worries, you are good.

[Dubuang]

Originally Posted by VDMTom

If there were changes, they were done to make them more durable for longevity. And that is what it seems like in this case IMO.

As long as the packaging/quality looks authentic you should have no worries, you are good.

Here is the actual reason, it is not for longevity it is for cost savings. The old stickers are the reason I wanted to buy new ones. Come to find out The sticker design has changed. The new stickers look fake to me because I grew up seeing the nicely cut stickers on my brothers Original TE37s back when they weren't even stamped on the front lips and the only way to find out if you had legit TE37s was to look at the stamping on the back of the hubs. For anyone that wants new stickers or OG TE37s your time is now. This is directly from Mackin, they will be discontinuing them soon.

[phodatbiet]

Hi..