(100%) E9x OEM Camera Installation (DIY)

[unrulyteach]

Originally Posted by SaNGRia

I wrote the details on the description!!!

Well then… Ik for the pdc i had to change the .txt to .Rar, do i do the same for the inpa or no

[chuzo]

Originally Posted by unrulyteach

Well then… Ik for the pdc i had to change the .txt to .Rar, do i do the same for the inpa or no

Yes for the Inpa.rar, there are files that you must place in the sgdat and remember to add the rfk_70 entry under e9x. You can also use ISTA/D and the trsvc should also appear.

[BFZ4M]

Originally Posted by unrulyteach

Well then… Ik for the pdc i had to change the .txt to .Rar, do i do the same for the inpa or no

Any updates? Did you get everything working?

[unrulyteach]

Originally Posted by BFZ4M

Any updates? Did you get everything working?

Yes sir i did

[Maxwell4321]

SaNGRia Did you manage to default code the TRSVC if so how did you do it ?

I can communicate to TRSVC with INPA and ISTA+ but not with NCS Expert, in NCS Expert the TRSVC module does not show up in the ECU list, only RFK is there and it will not communicate if I choose that.

Calibration was carried out successfully with ISTA and its all working but I want to edit some coding in the TRSVC with NCS.

[SaNGRia]

Yes I did. Only way to default code the TRSVC is to have ICOM. TRSVC is not as easy as other modules. It does complicated calibration and regular OBDII cable is not capable of doing it.

Best Regards from the DIYKing

Originally Posted by Maxwell4321

SaNGRia Did you manage to default code the TRSVC if so how did you do it ?

I can communicate to TRSVC with INPA and ISTA+ but not with NCS Expert, in NCS Expert the TRSVC module does not show up in the ECU list, only RFK is there and it will not communicate if I choose that.

Calibration was carried out successfully with ISTA and its all working but I want to edit some coding in the TRSVC with NCS.

[Prologic]

Originally Posted by SaNGRia

E90s don't have kline, not even early ones. The pin for Kline is x60002 #2 (on all MSV & MSD DMEs) and you will find on the E9x they all say "not used". (hassmaschine)

What year and model your car is and what is your DME?

But if you re 100% it is Kline then you will need DCAN cuz none of the modules like PDC or TRSVC will communicare over KLine! Too slow

I am currently thinking of this retrofit as well, but since I have 2005 car, mine is still Kline. In europe and probably some other regions, vehicles up to 2007/03 used Kline.

So even if I use newer JBE3 module marked KL (stands for Kline) it is not going to work?

[SaNGRia]

Originally Posted by Prologic

I am currently thinking of this retrofit as well, but since I have 2005 car, mine is still Kline. In europe and probably some other regions, vehicles up to 2007/03 used Kline.

So even if I use newer JBE3 module marked KL (stands for Kline) it is not going to work?

You gotta convert K-Line to DCAN . You can do it.

[Prologic]

Originally Posted by SaNGRia

You gotta convert K-Line to DCAN . You can do it.

Checked the wiring differences between Kline and DCAN, so if I understand correctly, I need only 1 additional wire to OBD port pin6, from DCAN JBE?

[SaNGRia]

Seems like it. You need Orange/Green and Green

[Emilime75]

This is such a fantastic mod. Thank you for posting it with such detail.

[SaNGRia]

Originally Posted by Emilime75

This is such a fantastic mod. Thank you for posting it with such detail.

Pleasure buddy, Enjoy

[Luchino]

Good!! Very good! the PDC control unit must necessarily be of the x1 or does that of the e90 also work?

[SaNGRia]

Originally Posted by Luchino

Good!! Very good! the PDC control unit must necessarily be of the x1 or does that of the e90 also work?

Thank you! MUST! Only E84 going to work!

[Luchino]

Originally Posted by SaNGRia

Thank you! MUST! Only E84 going to work!

thanks, so I replace my pdc with that of a x1 and I encode with the txt files that you share?

[SaNGRia]

Originally Posted by Luchino

thanks, so I replace my pdc with that of a x1 and I encode with the txt files that you share?

Correct!

[bmwm3s65]

I am attempting to add the backup camera but I have a 6mt no pdc. From what i have researched, it appears that i cannot install the backup camera without retrofitting pdc. If i retrofit the e84 pdc box, do i have to plug in the sensors too?

[SaNGRia]

Originally Posted by bmwm3s65

I am attempting to add the backup camera but I have a 6mt no pdc. From what i have researched, it appears that i cannot install the backup camera without retrofitting pdc. If i retrofit the e84 pdc box, do i have to plug in the sensors too?

Yes sir. You need to have an active PDC sensors running. so you should at least do the rear PDC retrofit. After that you can PM me and i can do the remote coding for you.

[josetev2]

después de buscar y buscar por miles de pagina llegue a esta super interesante.

os cuento mi problema para ver si podéis ayudarme. Yo tengo un x5 e70 del año 2007 que venia con ccc , hace unos días reequipe con CIC pero mi desagradable sorpresa es que he perdido la cámara y el pdc . el pdc solo suena cuando pones reversa pero sin gráficos .

Creéis que es un problema de coding?

Mil gracias y enhorabuena @SANGRIA por este post

[SaNGRia]

Originally Posted by josetev2

después de buscar y buscar por miles de pagina llegue a esta super interesante.

os cuento mi problema para ver si podéis ayudarme. Yo tengo un x5 e70 del año 2007 que venia con ccc , hace unos días reequipe con CIC pero mi desagradable sorpresa es que he perdido la cámara y el pdc . el pdc solo suena cuando pones reversa pero sin gráficos .

Creéis que es un problema de coding?

Mil gracias y enhorabuena @SANGRIA por este post

I can try to reactivate on CIC via remote coding. PM me. And please translate in English since i dont speak your launguage.

[josetev2]

Originally Posted by SaNGRia

I can try to reactivate on CIC via remote coding. PM me. And please translate in English since i dont speak your launguage.

Good to have people willing to help. thank you . You have a PM

[chance91]

Have you or anyone else done the side or top view yet? Considering doing so as I have a local JY with an X5 for cheap.

Also, thought this might interest you. Did an M5 steering wheel and F80 seat in my E84. Can also do it on an E93 without a doubt.

https://photos.app.goo.gl/Jt2rxhA2fhVYZ47c8

Full function, including heat, lumbar, and the //M light.
https://photos.app.goo.gl/UG4rGRmwmYpCzXxV9