|
|
11-27-2017, 02:17 AM | #1 |
Private
36
Rep 82
Posts |
Missing .IPO file, GTS flash
trying to diy the M3 GTS DCT Transmission flash
i have WinKFP setup via mikes easy bmw tools, i press F1>F3> select ECU family GS40 i get this error, i seem to be missing an IPO file https://drive.google.com/open?id=1Ga...aJyjOIdsT4hVmn i tried looking for it in the sp daten 60.1 folder, and cant seem to find it. thanks |
12-19-2017, 06:12 PM | #3 |
Save the manuals!
5997
Rep 6,728
Posts |
Import your Datens manually. It worked when I had similar instances of Error 106. BMW Standard Tools would sometimes incorrectly import the files into the database used by WinKFP.
Also make sure your OBD2 cable has to correct COM port and latency settings, and if the cable is switched to ensure it's on the proper toggle for 2007+ cars.
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
0
|
06-01-2018, 09:39 AM | #4 |
Private
36
Rep 82
Posts |
solved the problem, i was pressing F1>F3 and selecting the GS40 module and the zb number without the my PC connected to the car.
i was able to flash it with the 7845773 software |
Appreciate
1
Sam @ BPM Sport37.50 |
06-04-2020, 03:27 PM | #5 | |
Banned
432
Rep 235
Posts |
Quote:
but when I go to winkfp I get the exact same issue as you, error 106. I tried downloading latest so datens and looked through every nook and cranny of every file and not one of them is named 00gs40.prg or 00gs40.ipo this is frustrating, I even payed for extra download allowance from mega to download each daten folder and look through it. what am I doing wrong? |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|