|
|
11-13-2019, 02:52 PM | #1 |
Private First Class
239
Rep 170
Posts |
FS: 2012 E92 M3 Ultimate Daily/Track Build
Looking to spend more time with the kids doing fun stuff together, selling my car. This was a huge build, and the results was the creation of an amazing combo of drive to work every day comfort and track slaying ability. The entire build is documented in the track section. Car is dialed. Looking for $45k, but have a bit of wiggle room depending on things I could include or not (like race seat, uninstalled DCT coolers, etc).
Build Thread, tons of photos. https://www.m3post.com/forums/showth...highlight=jid2 2012 E92 M3 ZCP DCT, 70K miles $45K I bought the car at 50K miles and did the build. Most of miles are my commute which is around 80-100 miles a day. Not looking to part out at this time. Full specs: Suspension MCS 2 Way Adjustable with remote reservoirs dampers, rear non-coilover 600 lb front (6" x 2.25" with helper) 900 lb rear springs (8" x 60mm no helper) Ground Control race camber plates and articulating rear perches Power flex race top mount for rear shock Hotchkins swaybars front and rear Bimmerworld adjustable front swaybar links Hotchkins adjustable rear swaybar endlinks Bimmerworld solid rear subframe mounts SPL rear toe arms, with eccentric lockout EDC coded out Brakes Bimmerworld stainless lines Motul RBF600 Fluid Performance Friction Z54 big brakes in the front, PF012 pads for track, and PF street pads for daily driving Ferodo DS2500 rear pads, stock calipers and rotors Wheels and Tires Track Apex ARC 8 18x10 +25 Pirelli 265 65 18 DH slicks Removed TPMS sensors and coded them out Macht Schnell extended wheel studs 10mm spacers front and rear Street BMW ZCP competition package wheels Michelin Pilot Sport AS3+ 15mm Front spacer Engine and drivetrain BE Rod bearings and ARP bolts New OEM motor mounts CSF aluminum 3 pass radiator All new OEM cooling parts: water pump, all cooling hoses, coolant reservoir Rogue underdrive pulley AFE carbon fiber intake with two filters: dry and wrt Bimmerworld power steering reservoir EPIC race tune Euro MDM coding GTS DCT tune Bimmerworld X-Pipe, resonated, no cats Bimmerworld Race catback exhaust Still have full stock exhaust as well, I daily drive with stock rear section and BW X-Pipe. Exterior GT4 splitter APR GT250 wing 61" Ebay carbon fiber side skirts Raceseng Tug towhook Rear tow strap Carbon turn indicators Interior Bimmerworld billet pedals Scroth Quickfit Pro harnesses, both seats Sparco Seat with base available
__________________
2012 E92 M3 ZCP MCS 2WR coilovers 600F/900R, Performance Friction ZF54 front BBK, stainless lines, Ferodo DS 2500 rear pads, Hotchkins F/R swaybars, solid subframe mounts, BE Bearings, ARP rod bolts, Bimmerworld motor mounts, AFe intake, underdrive, CSF radiator, GT4 front lip (ebay), APR GT 500, ebay side skirts, RaceEng tug, 15mm/10mm spacers on ZCP wheels, Apex ARC 8 18x10 square track wheels with Pirelli 265 DH slicks
|
11-14-2019, 01:34 PM | #2 |
Major
347
Rep 1,095
Posts
Drives: Melbourne Red e90 M3
Join Date: Jul 2012
Location: Bellevue, WA
|
Nice build, GLWS! May be hard to get that price as the mods don't add a ton value and it's seen plenty of track time, a part out back to stock will likely get you more overall.
__________________
6MT | 11:1 Forged 4.1L | ESS-G1 | KW ClubSport | Sparta 380/355 BBK
|
Appreciate
1
Bailey!92.50 |
11-14-2019, 03:47 PM | #3 |
Private First Class
239
Rep 170
Posts |
We will see, race cars with this same spec that are stripped out (less value) and have a cage ($5k) have been listed for between $55-$65k. Who knows if they ever sell. I know I would have bought this when I was looking, everything I saw had gone too far into race car and wasn't suitable to daily. The mods are close to $30k on this build without any labor, so it's a deal - just needs the right buyer. And I don't want to part it out, it's too good to ruin.
__________________
2012 E92 M3 ZCP MCS 2WR coilovers 600F/900R, Performance Friction ZF54 front BBK, stainless lines, Ferodo DS 2500 rear pads, Hotchkins F/R swaybars, solid subframe mounts, BE Bearings, ARP rod bolts, Bimmerworld motor mounts, AFe intake, underdrive, CSF radiator, GT4 front lip (ebay), APR GT 500, ebay side skirts, RaceEng tug, 15mm/10mm spacers on ZCP wheels, Apex ARC 8 18x10 square track wheels with Pirelli 265 DH slicks
|
Appreciate
0
|
11-15-2019, 11:35 AM | #4 |
Captain
162
Rep 764
Posts
Drives: M3 E90 Jetblack
Join Date: Oct 2013
Location: WA
|
nice build.
keeping an eye on if this sells. might be putting mine up for sale next spring. we have similar mods except mine is an e90, 6mt, with a harrop SC. |
Appreciate
0
|
11-15-2019, 09:59 PM | #5 |
Driver
2690
Rep 2,714
Posts |
So many nice parts on this car. I hope to have many on my car eventually. Sorry to see you selling, but good luck!
__________________
E90M 6MT Slicktop Single Humper in need of a diet
|
Appreciate
0
|
11-15-2019, 11:51 PM | #6 |
Colonel
218
Rep 2,702
Posts |
Glws! Let me know if you're interested in parting out some things. I'd be interested in pulley and bbk.
__________________
Cars: SGM 325i l BSM 135i l SS to Gloss White S2000 l Arctic White RS4 l White GTi l AW 335d M-Sport l IS 350 l e92 M3 l F80 m3
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|