|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
09-13-2018, 10:54 AM | #1 |
New Member
3
Rep 16
Posts |
How do i see witch mosfet on my actuator that needs to be replaced
|
11-14-2018, 03:13 AM | #3 |
Colonel
1458
Rep 2,336
Posts |
I believe in the kit you get two per actuator so you end up replacing both
__________________
'09 ///M3 Sedan - Jerez Black/Fox Red Ext.
'09 335i Coupe - Alpine White/Black - SOLD |
Appreciate
0
|
11-14-2018, 10:32 AM | #6 |
Lieutenant General
5212
Rep 10,594
Posts |
You can buy the 5 mosfets on eBay also. I have a set but won’t be doing this now since I have an mpower rebuilt on one bank and a new one on the other. I rebuilt 4 with new gears. 2 still failed and 1 failed later. The 4th was still working when I swapped it because I was in there changing the starter. Not worth my time messing with these — I have spent too much time swapping them around already.
|
Appreciate
0
|
11-14-2018, 12:26 PM | #7 |
New Member
2
Rep 16
Posts |
What did go wrong with them? I remember when I changed my spark plugs and boot I torn them apart to see how they were and they were not bad at all despite the age of the car... There is a lot of heat up there and I think that they are not spited well between the V ... not ideal for the 2.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|